deleted file mode 100644
@@ -1,268 +0,0 @@
-/*
- * 1.00 Oct 31, 1994 -- Initial version.
- * 1.01 Nov 2, 1994 -- Fixed problem with starting request in
- * cdrom_check_status.
- * 1.03 Nov 25, 1994 -- leaving unmask_intr[] as a user-setting (as for disks)
- * (from mlord) -- minor changes to cdrom_setup()
- * -- renamed ide_dev_s to ide_drive_t, enable irq on command
- * 2.00 Nov 27, 1994 -- Generalize packet command interface;
- * add audio ioctls.
- * 2.01 Dec 3, 1994 -- Rework packet command interface to handle devices
- * which send an interrupt when ready for a command.
- * 2.02 Dec 11, 1994 -- Cache the TOC in the driver.
- * Don't use SCMD_PLAYAUDIO_TI; it's not included
- * in the current version of ATAPI.
- * Try to use LBA instead of track or MSF addressing
- * when possible.
- * Don't wait for READY_STAT.
- * 2.03 Jan 10, 1995 -- Rewrite block read routines to handle block sizes
- * other than 2k and to move multiple sectors in a
- * single transaction.
- * 2.04 Apr 21, 1995 -- Add work-around for Creative Labs CD220E drives.
- * Thanks to Nick Saw <cwsaw@pts7.pts.mot.com> for
- * help in figuring this out. Ditto for Acer and
- * Aztech drives, which seem to have the same problem.
- * 2.04b May 30, 1995 -- Fix to match changes in ide.c version 3.16 -ml
- * 2.05 Jun 8, 1995 -- Don't attempt to retry after an illegal request
- * or data protect error.
- * Use HWIF and DEV_HWIF macros as in ide.c.
- * Always try to do a request_sense after
- * a failed command.
- * Include an option to give textual descriptions
- * of ATAPI errors.
- * Fix a bug in handling the sector cache which
- * showed up if the drive returned data in 512 byte
- * blocks (like Pioneer drives). Thanks to
- * Richard Hirst <srh@gpt.co.uk> for diagnosing this.
- * Properly supply the page number field in the
- * MODE_SELECT command.
- * PLAYAUDIO12 is broken on the Aztech; work around it.
- * 2.05x Aug 11, 1995 -- lots of data structure renaming/restructuring in ide.c
- * (my apologies to Scott, but now ide-cd.c is independent)
- * 3.00 Aug 22, 1995 -- Implement CDROMMULTISESSION ioctl.
- * Implement CDROMREADAUDIO ioctl (UNTESTED).
- * Use input_ide_data() and output_ide_data().
- * Add door locking.
- * Fix usage count leak in cdrom_open, which happened
- * when a read-write mount was attempted.
- * Try to load the disk on open.
- * Implement CDROMEJECT_SW ioctl (off by default).
- * Read total cdrom capacity during open.
- * Rearrange logic in cdrom_decode_status. Issue
- * request sense commands for failed packet commands
- * from here instead of from cdrom_queue_packet_command.
- * Fix a race condition in retrieving error information.
- * Suppress printing normal unit attention errors and
- * some drive not ready errors.
- * Implement CDROMVOLREAD ioctl.
- * Implement CDROMREADMODE1/2 ioctls.
- * Fix race condition in setting up interrupt handlers
- * when the `serialize' option is used.
- * 3.01 Sep 2, 1995 -- Fix ordering of reenabling interrupts in
- * cdrom_queue_request.
- * Another try at using ide_[input,output]_data.
- * 3.02 Sep 16, 1995 -- Stick total disk capacity in partition table as well.
- * Make VERBOSE_IDE_CD_ERRORS dump failed command again.
- * Dump out more information for ILLEGAL REQUEST errs.
- * Fix handling of errors occurring before the
- * packet command is transferred.
- * Fix transfers with odd bytelengths.
- * 3.03 Oct 27, 1995 -- Some Creative drives have an id of just `CD'.
- * `DCI-2S10' drives are broken too.
- * 3.04 Nov 20, 1995 -- So are Vertos drives.
- * 3.05 Dec 1, 1995 -- Changes to go with overhaul of ide.c and ide-tape.c
- * 3.06 Dec 16, 1995 -- Add support needed for partitions.
- * More workarounds for Vertos bugs (based on patches
- * from Holger Dietze <dietze@aix520.informatik.uni-leipzig.de>).
- * Try to eliminate byteorder assumptions.
- * Use atapi_cdrom_subchnl struct definition.
- * Add STANDARD_ATAPI compilation option.
- * 3.07 Jan 29, 1996 -- More twiddling for broken drives: Sony 55D,
- * Vertos 300.
- * Add NO_DOOR_LOCKING configuration option.
- * Handle drive_cmd requests w/NULL args (for hdparm -t).
- * Work around sporadic Sony55e audio play problem.
- * 3.07a Feb 11, 1996 -- check drive->id for NULL before dereferencing, to fix
- * problem with "hde=cdrom" with no drive present. -ml
- * 3.08 Mar 6, 1996 -- More Vertos workarounds.
- * 3.09 Apr 5, 1996 -- Add CDROMCLOSETRAY ioctl.
- * Switch to using MSF addressing for audio commands.
- * Reformat to match kernel tabbing style.
- * Add CDROM_GET_UPC ioctl.
- * 3.10 Apr 10, 1996 -- Fix compilation error with STANDARD_ATAPI.
- * 3.11 Apr 29, 1996 -- Patch from Heiko Eißfeldt <heiko@colossus.escape.de>
- * to remove redundant verify_area calls.
- * 3.12 May 7, 1996 -- Rudimentary changer support. Based on patches
- * from Gerhard Zuber <zuber@berlin.snafu.de>.
- * Let open succeed even if there's no loaded disc.
- * 3.13 May 19, 1996 -- Fixes for changer code.
- * 3.14 May 29, 1996 -- Add work-around for Vertos 600.
- * (From Hennus Bergman <hennus@sky.ow.nl>.)
- * 3.15 July 2, 1996 -- Added support for Sanyo 3 CD changers
- * from Ben Galliart <bgallia@luc.edu> with
- * special help from Jeff Lightfoot
- * <jeffml@pobox.com>
- * 3.15a July 9, 1996 -- Improved Sanyo 3 CD changer identification
- * 3.16 Jul 28, 1996 -- Fix from Gadi to reduce kernel stack usage for ioctl.
- * 3.17 Sep 17, 1996 -- Tweak audio reads for some drives.
- * Start changing CDROMLOADFROMSLOT to CDROM_SELECT_DISC.
- * 3.18 Oct 31, 1996 -- Added module and DMA support.
- *
- * 4.00 Nov 5, 1996 -- New ide-cd maintainer,
- * Erik B. Andersen <andersee@debian.org>
- * -- Newer Creative drives don't always set the error
- * register correctly. Make sure we see media changes
- * regardless.
- * -- Integrate with generic cdrom driver.
- * -- CDROMGETSPINDOWN and CDROMSETSPINDOWN ioctls, based on
- * a patch from Ciro Cattuto <>.
- * -- Call set_device_ro.
- * -- Implement CDROMMECHANISMSTATUS and CDROMSLOTTABLE
- * ioctls, based on patch by Erik Andersen
- * -- Add some probes of drive capability during setup.
- *
- * 4.01 Nov 11, 1996 -- Split into ide-cd.c and ide-cd.h
- * -- Removed CDROMMECHANISMSTATUS and CDROMSLOTTABLE
- * ioctls in favor of a generalized approach
- * using the generic cdrom driver.
- * -- Fully integrated with the 2.1.X kernel.
- * -- Other stuff that I forgot (lots of changes)
- *
- * 4.02 Dec 01, 1996 -- Applied patch from Gadi Oxman <gadio@netvision.net.il>
- * to fix the drive door locking problems.
- *
- * 4.03 Dec 04, 1996 -- Added DSC overlap support.
- * 4.04 Dec 29, 1996 -- Added CDROMREADRAW ioclt based on patch
- * by Ales Makarov (xmakarov@sun.felk.cvut.cz)
- *
- * 4.05 Nov 20, 1997 -- Modified to print more drive info on init
- * Minor other changes
- * Fix errors on CDROMSTOP (If you have a "Dolphin",
- * you must define IHAVEADOLPHIN)
- * Added identifier so new Sanyo CD-changer works
- * Better detection if door locking isn't supported
- *
- * 4.06 Dec 17, 1997 -- fixed endless "tray open" messages -ml
- * 4.07 Dec 17, 1997 -- fallback to set pc->stat on "tray open"
- * 4.08 Dec 18, 1997 -- spew less noise when tray is empty
- * -- fix speed display for ACER 24X, 18X
- * 4.09 Jan 04, 1998 -- fix handling of the last block so we return
- * an end of file instead of an I/O error (Gadi)
- * 4.10 Jan 24, 1998 -- fixed a bug so now changers can change to a new
- * slot when there is no disc in the current slot.
- * -- Fixed a memory leak where info->changer_info was
- * malloc'ed but never free'd when closing the device.
- * -- Cleaned up the global namespace a bit by making more
- * functions static that should already have been.
- * 4.11 Mar 12, 1998 -- Added support for the CDROM_SELECT_SPEED ioctl
- * based on a patch for 2.0.33 by Jelle Foks
- * <jelle@scintilla.utwente.nl>, a patch for 2.0.33
- * by Toni Giorgino <toni@pcape2.pi.infn.it>, the SCSI
- * version, and my own efforts. -erik
- * -- Fixed a stupid bug which egcs was kind enough to
- * inform me of where "Illegal mode for this track"
- * was never returned due to a comparison on data
- * types of limited range.
- * 4.12 Mar 29, 1998 -- Fixed bug in CDROM_SELECT_SPEED so write speed is
- * now set ionly for CD-R and CD-RW drives. I had
- * removed this support because it produced errors.
- * It produced errors _only_ for non-writers. duh.
- * 4.13 May 05, 1998 -- Suppress useless "in progress of becoming ready"
- * messages, since this is not an error.
- * -- Change error messages to be const
- * -- Remove a "\t" which looks ugly in the syslogs
- * 4.14 July 17, 1998 -- Change to pointing to .ps version of ATAPI spec
- * since the .pdf version doesn't seem to work...
- * -- Updated the TODO list to something more current.
- *
- * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect machine endianness,
- * patch thanks to "Eddie C. Dost" <ecd@skynet.be>
- *
- * 4.50 Oct 19, 1998 -- New maintainers!
- * Jens Axboe <axboe@image.dk>
- * Chris Zwilling <chris@cloudnet.com>
- *
- * 4.51 Dec 23, 1998 -- Jens Axboe <axboe@image.dk>
- * - ide_cdrom_reset enabled since the ide subsystem
- * handles resets fine now. <axboe@image.dk>
- * - Transfer size fix for Samsung CD-ROMs, thanks to
- * "Ville Hallik" <ville.hallik@mail.ee>.
- * - other minor stuff.
- *
- * 4.52 Jan 19, 1999 -- Jens Axboe <axboe@image.dk>
- * - Detect DVD-ROM/RAM drives
- *
- * 4.53 Feb 22, 1999 - Include other model Samsung and one Goldstar
- * drive in transfer size limit.
- * - Fix the I/O error when doing eject without a medium
- * loaded on some drives.
- * - CDROMREADMODE2 is now implemented through
- * CDROMREADRAW, since many drives don't support
- * MODE2 (even though ATAPI 2.6 says they must).
- * - Added ignore parameter to ide-cd (as a module), eg
- * insmod ide-cd ignore='hda hdb'
- * Useful when using ide-cd in conjunction with
- * ide-scsi. TODO: non-modular way of doing the
- * same.
- *
- * 4.54 Aug 5, 1999 - Support for MMC2 class commands through the generic
- * packet interface to cdrom.c.
- * - Unified audio ioctl support, most of it.
- * - cleaned up various deprecated verify_area().
- * - Added ide_cdrom_packet() as the interface for
- * the Uniform generic_packet().
- * - bunch of other stuff, will fill in logs later.
- * - report 1 slot for non-changers, like the other
- * cd-rom drivers. don't report select disc for
- * non-changers as well.
- * - mask out audio playing, if the device can't do it.
- *
- * 4.55 Sep 1, 1999 - Eliminated the rest of the audio ioctls, except
- * for CDROMREADTOC[ENTRY|HEADER]. Some of the drivers
- * use this independently of the actual audio handling.
- * They will disappear later when I get the time to
- * do it cleanly.
- * - Minimize the TOC reading - only do it when we
- * know a media change has occurred.
- * - Moved all the CDROMREADx ioctls to the Uniform layer.
- * - Heiko Eißfeldt <heiko@colossus.escape.de> supplied
- * some fixes for CDI.
- * - CD-ROM leaving door locked fix from Andries
- * Brouwer <Andries.Brouwer@cwi.nl>
- * - Erik Andersen <andersen@xmission.com> unified
- * commands across the various drivers and how
- * sense errors are handled.
- *
- * 4.56 Sep 12, 1999 - Removed changer support - it is now in the
- * Uniform layer.
- * - Added partition based multisession handling.
- * - Mode sense and mode select moved to the
- * Uniform layer.
- * - Fixed a problem with WPI CDS-32X drive - it
- * failed the capabilities
- *
- * 4.57 Apr 7, 2000 - Fixed sense reporting.
- * - Fixed possible oops in ide_cdrom_get_last_session()
- * - Fix locking mania and make ide_cdrom_reset relock
- * - Stop spewing errors to log when magicdev polls with
- * TEST_UNIT_READY on some drives.
- * - Various fixes from Tobias Ringstrom:
- * tray if it was locked prior to the reset.
- * - cdrom_read_capacity returns one frame too little.
- * - Fix real capacity reporting.
- *
- * 4.58 May 1, 2000 - Clean up ACER50 stuff.
- * - Fix small problem with ide_cdrom_capacity
- *
- * 4.59 Aug 11, 2000 - Fix changer problem in cdrom_read_toc, we weren't
- * correctly sensing a disc change.
- * - Rearranged some code
- * - Use extended sense on drives that support it for
- * correctly reporting tray status -- from
- * Michael D Johnson <johnsom@orst.edu>
- * 4.60 Dec 17, 2003 - Add mt rainier support
- * - Bump timeout for packet commands, matches sr
- * - Odd stuff
- * 4.61 Jan 22, 2004 - support hardware sector sizes other than 2kB,
- * Pascal Schmidt <der.eremit@email.de>
- */
deleted file mode 100644
@@ -1,63 +0,0 @@
-/*
- * Many thanks to Lode Leroy <Lode.Leroy@www.ibase.be>, who tested so many
- * ALPHA patches to this driver on an EASYSTOR LS-120 ATAPI floppy drive.
- *
- * Ver 0.1 Oct 17 96 Initial test version, mostly based on ide-tape.c.
- * Ver 0.2 Oct 31 96 Minor changes.
- * Ver 0.3 Dec 2 96 Fixed error recovery bug.
- * Ver 0.4 Jan 26 97 Add support for the HDIO_GETGEO ioctl.
- * Ver 0.5 Feb 21 97 Add partitions support.
- * Use the minimum of the LBA and CHS capacities.
- * Avoid hwgroup->rq == NULL on the last irq.
- * Fix potential null dereferencing with DEBUG_LOG.
- * Ver 0.8 Dec 7 97 Increase irq timeout from 10 to 50 seconds.
- * Add media write-protect detection.
- * Issue START command only if TEST UNIT READY fails.
- * Add work-around for IOMEGA ZIP revision 21.D.
- * Remove idefloppy_get_capabilities().
- * Ver 0.9 Jul 4 99 Fix a bug which might have caused the number of
- * bytes requested on each interrupt to be zero.
- * Thanks to <shanos@es.co.nz> for pointing this out.
- * Ver 0.9.sv Jan 6 01 Sam Varshavchik <mrsam@courier-mta.com>
- * Implement low level formatting. Reimplemented
- * IDEFLOPPY_CAPABILITIES_PAGE, since we need the srfp
- * bit. My LS-120 drive barfs on
- * IDEFLOPPY_CAPABILITIES_PAGE, but maybe it's just me.
- * Compromise by not reporting a failure to get this
- * mode page. Implemented four IOCTLs in order to
- * implement formatting. IOCTls begin with 0x4600,
- * 0x46 is 'F' as in Format.
- * Jan 9 01 Userland option to select format verify.
- * Added PC_SUPPRESS_ERROR flag - some idefloppy drives
- * do not implement IDEFLOPPY_CAPABILITIES_PAGE, and
- * return a sense error. Suppress error reporting in
- * this particular case in order to avoid spurious
- * errors in syslog. The culprit is
- * idefloppy_get_capability_page(), so move it to
- * idefloppy_begin_format() so that it's not used
- * unless absolutely necessary.
- * If drive does not support format progress indication
- * monitor the dsc bit in the status register.
- * Also, O_NDELAY on open will allow the device to be
- * opened without a disk available. This can be used to
- * open an unformatted disk, or get the device capacity.
- * Ver 0.91 Dec 11 99 Added IOMEGA Clik! drive support by
- * <paul@paulbristow.net>
- * Ver 0.92 Oct 22 00 Paul Bristow became official maintainer for this
- * driver. Included Powerbook internal zip kludge.
- * Ver 0.93 Oct 24 00 Fixed bugs for Clik! drive
- * no disk on insert and disk change now works
- * Ver 0.94 Oct 27 00 Tidied up to remove strstr(Clik) everywhere
- * Ver 0.95 Nov 7 00 Brought across to kernel 2.4
- * Ver 0.96 Jan 7 01 Actually in line with release version of 2.4.0
- * including set_bit patch from Rusty Russell
- * Ver 0.97 Jul 22 01 Merge 0.91-0.96 onto 0.9.sv for ac series
- * Ver 0.97.sv Aug 3 01 Backported from 2.4.7-ac3
- * Ver 0.98 Oct 26 01 Split idefloppy_transfer_pc into two pieces to
- * fix a lost interrupt problem. It appears the busy
- * bit was being deasserted by my IOMEGA ATAPI ZIP 100
- * drive before the drive was actually ready.
- * Ver 0.98a Oct 29 01 Expose delay value so we can play.
- * Ver 0.99 Feb 24 02 Remove duplicate code, modify clik! detection code
- * to support new PocketZip drives
- */
deleted file mode 100644
@@ -1,257 +0,0 @@
-/*
- * Ver 0.1 Nov 1 95 Pre-working code :-)
- * Ver 0.2 Nov 23 95 A short backup (few megabytes) and restore procedure
- * was successful ! (Using tar cvf ... on the block
- * device interface).
- * A longer backup resulted in major swapping, bad
- * overall Linux performance and eventually failed as
- * we received non serial read-ahead requests from the
- * buffer cache.
- * Ver 0.3 Nov 28 95 Long backups are now possible, thanks to the
- * character device interface. Linux's responsiveness
- * and performance doesn't seem to be much affected
- * from the background backup procedure.
- * Some general mtio.h magnetic tape operations are
- * now supported by our character device. As a result,
- * popular tape utilities are starting to work with
- * ide tapes :-)
- * The following configurations were tested:
- * 1. An IDE ATAPI TAPE shares the same interface
- * and irq with an IDE ATAPI CDROM.
- * 2. An IDE ATAPI TAPE shares the same interface
- * and irq with a normal IDE disk.
- * Both configurations seemed to work just fine !
- * However, to be on the safe side, it is meanwhile
- * recommended to give the IDE TAPE its own interface
- * and irq.
- * The one thing which needs to be done here is to
- * add a "request postpone" feature to ide.c,
- * so that we won't have to wait for the tape to finish
- * performing a long media access (DSC) request (such
- * as a rewind) before we can access the other device
- * on the same interface. This effect doesn't disturb
- * normal operation most of the time because read/write
- * requests are relatively fast, and once we are
- * performing one tape r/w request, a lot of requests
- * from the other device can be queued and ide.c will
- * service all of them after this single tape request.
- * Ver 1.0 Dec 11 95 Integrated into Linux 1.3.46 development tree.
- * On each read / write request, we now ask the drive
- * if we can transfer a constant number of bytes
- * (a parameter of the drive) only to its buffers,
- * without causing actual media access. If we can't,
- * we just wait until we can by polling the DSC bit.
- * This ensures that while we are not transferring
- * more bytes than the constant referred to above, the
- * interrupt latency will not become too high and
- * we won't cause an interrupt timeout, as happened
- * occasionally in the previous version.
- * While polling for DSC, the current request is
- * postponed and ide.c is free to handle requests from
- * the other device. This is handled transparently to
- * ide.c. The hwgroup locking method which was used
- * in the previous version was removed.
- * Use of new general features which are provided by
- * ide.c for use with atapi devices.
- * (Programming done by Mark Lord)
- * Few potential bug fixes (Again, suggested by Mark)
- * Single character device data transfers are now
- * not limited in size, as they were before.
- * We are asking the tape about its recommended
- * transfer unit and send a larger data transfer
- * as several transfers of the above size.
- * For best results, use an integral number of this
- * basic unit (which is shown during driver
- * initialization). I will soon add an ioctl to get
- * this important parameter.
- * Our data transfer buffer is allocated on startup,
- * rather than before each data transfer. This should
- * ensure that we will indeed have a data buffer.
- * Ver 1.1 Dec 14 95 Fixed random problems which occurred when the tape
- * shared an interface with another device.
- * (poll_for_dsc was a complete mess).
- * Removed some old (non-active) code which had
- * to do with supporting buffer cache originated
- * requests.
- * The block device interface can now be opened, so
- * that general ide driver features like the unmask
- * interrupts flag can be selected with an ioctl.
- * This is the only use of the block device interface.
- * New fast pipelined operation mode (currently only on
- * writes). When using the pipelined mode, the
- * throughput can potentially reach the maximum
- * tape supported throughput, regardless of the
- * user backup program. On my tape drive, it sometimes
- * boosted performance by a factor of 2. Pipelined
- * mode is enabled by default, but since it has a few
- * downfalls as well, you may want to disable it.
- * A short explanation of the pipelined operation mode
- * is available below.
- * Ver 1.2 Jan 1 96 Eliminated pipelined mode race condition.
- * Added pipeline read mode. As a result, restores
- * are now as fast as backups.
- * Optimized shared interface behavior. The new behavior
- * typically results in better IDE bus efficiency and
- * higher tape throughput.
- * Pre-calculation of the expected read/write request
- * service time, based on the tape's parameters. In
- * the pipelined operation mode, this allows us to
- * adjust our polling frequency to a much lower value,
- * and thus to dramatically reduce our load on Linux,
- * without any decrease in performance.
- * Implemented additional mtio.h operations.
- * The recommended user block size is returned by
- * the MTIOCGET ioctl.
- * Additional minor changes.
- * Ver 1.3 Feb 9 96 Fixed pipelined read mode bug which prevented the
- * use of some block sizes during a restore procedure.
- * The character device interface will now present a
- * continuous view of the media - any mix of block sizes
- * during a backup/restore procedure is supported. The
- * driver will buffer the requests internally and
- * convert them to the tape's recommended transfer
- * unit, making performance almost independent of the
- * chosen user block size.
- * Some improvements in error recovery.
- * By cooperating with ide-dma.c, bus mastering DMA can
- * now sometimes be used with IDE tape drives as well.
- * Bus mastering DMA has the potential to dramatically
- * reduce the CPU's overhead when accessing the device,
- * and can be enabled by using hdparm -d1 on the tape's
- * block device interface. For more info, read the
- * comments in ide-dma.c.
- * Ver 1.4 Mar 13 96 Fixed serialize support.
- * Ver 1.5 Apr 12 96 Fixed shared interface operation, broken in 1.3.85.
- * Fixed pipelined read mode inefficiency.
- * Fixed nasty null dereferencing bug.
- * Ver 1.6 Aug 16 96 Fixed FPU usage in the driver.
- * Fixed end of media bug.
- * Ver 1.7 Sep 10 96 Minor changes for the CONNER CTT8000-A model.
- * Ver 1.8 Sep 26 96 Attempt to find a better balance between good
- * interactive response and high system throughput.
- * Ver 1.9 Nov 5 96 Automatically cross encountered filemarks rather
- * than requiring an explicit FSF command.
- * Abort pending requests at end of media.
- * MTTELL was sometimes returning incorrect results.
- * Return the real block size in the MTIOCGET ioctl.
- * Some error recovery bug fixes.
- * Ver 1.10 Nov 5 96 Major reorganization.
- * Reduced CPU overhead a bit by eliminating internal
- * bounce buffers.
- * Added module support.
- * Added multiple tape drives support.
- * Added partition support.
- * Rewrote DSC handling.
- * Some portability fixes.
- * Removed ide-tape.h.
- * Additional minor changes.
- * Ver 1.11 Dec 2 96 Bug fix in previous DSC timeout handling.
- * Use ide_stall_queue() for DSC overlap.
- * Use the maximum speed rather than the current speed
- * to compute the request service time.
- * Ver 1.12 Dec 7 97 Fix random memory overwriting and/or last block data
- * corruption, which could occur if the total number
- * of bytes written to the tape was not an integral
- * number of tape blocks.
- * Add support for INTERRUPT DRQ devices.
- * Ver 1.13 Jan 2 98 Add "speed == 0" work-around for HP COLORADO 5GB
- * Ver 1.14 Dec 30 98 Partial fixes for the Sony/AIWA tape drives.
- * Replace cli()/sti() with hwgroup spinlocks.
- * Ver 1.15 Mar 25 99 Fix SMP race condition by replacing hwgroup
- * spinlock with private per-tape spinlock.
- * Ver 1.16 Sep 1 99 Add OnStream tape support.
- * Abort read pipeline on EOD.
- * Wait for the tape to become ready in case it returns
- * "in the process of becoming ready" on open().
- * Fix zero padding of the last written block in
- * case the tape block size is larger than PAGE_SIZE.
- * Decrease the default disconnection time to tn.
- * Ver 1.16e Oct 3 99 Minor fixes.
- * Ver 1.16e1 Oct 13 99 Patches by Arnold Niessen,
- * niessen@iae.nl / arnold.niessen@philips.com
- * GO-1) Undefined code in idetape_read_position
- * according to Gadi's email
- * AJN-1) Minor fix asc == 11 should be asc == 0x11
- * in idetape_issue_packet_command (did effect
- * debugging output only)
- * AJN-2) Added more debugging output, and
- * added ide-tape: where missing. I would also
- * like to add tape->name where possible
- * AJN-3) Added different debug_level's
- * via /proc/ide/hdc/settings
- * "debug_level" determines amount of debugging output;
- * can be changed using /proc/ide/hdx/settings
- * 0 : almost no debugging output
- * 1 : 0+output errors only
- * 2 : 1+output all sensekey/asc
- * 3 : 2+follow all chrdev related procedures
- * 4 : 3+follow all procedures
- * 5 : 4+include pc_stack rq_stack info
- * 6 : 5+USE_COUNT updates
- * AJN-4) Fixed timeout for retension in idetape_queue_pc_tail
- * from 5 to 10 minutes
- * AJN-5) Changed maximum number of blocks to skip when
- * reading tapes with multiple consecutive write
- * errors from 100 to 1000 in idetape_get_logical_blk
- * Proposed changes to code:
- * 1) output "logical_blk_num" via /proc
- * 2) output "current_operation" via /proc
- * 3) Either solve or document the fact that `mt rewind' is
- * required after reading from /dev/nhtx to be
- * able to rmmod the idetape module;
- * Also, sometimes an application finishes but the
- * device remains `busy' for some time. Same cause ?
- * Proposed changes to release-notes:
- * 4) write a simple `quickstart' section in the
- * release notes; I volunteer if you don't want to
- * 5) include a pointer to video4linux in the doc
- * to stimulate video applications
- * 6) release notes lines 331 and 362: explain what happens
- * if the application data rate is higher than 1100 KB/s;
- * similar approach to lower-than-500 kB/s ?
- * 7) 6.6 Comparison; wouldn't it be better to allow different
- * strategies for read and write ?
- * Wouldn't it be better to control the tape buffer
- * contents instead of the bandwidth ?
- * 8) line 536: replace will by would (if I understand
- * this section correctly, a hypothetical and unwanted situation
- * is being described)
- * Ver 1.16f Dec 15 99 Change place of the secondary OnStream header frames.
- * Ver 1.17 Nov 2000 / Jan 2001 Marcel Mol, marcel@mesa.nl
- * - Add idetape_onstream_mode_sense_tape_parameter_page
- * function to get tape capacity in frames: tape->capacity.
- * - Add support for DI-50 drives( or any DI- drive).
- * - 'workaround' for read error/blank block around block 3000.
- * - Implement Early warning for end of media for Onstream.
- * - Cosmetic code changes for readability.
- * - Idetape_position_tape should not use SKIP bit during
- * Onstream read recovery.
- * - Add capacity, logical_blk_num and first/last_frame_position
- * to /proc/ide/hd?/settings.
- * - Module use count was gone in the Linux 2.4 driver.
- * Ver 1.17a Apr 2001 Willem Riede osst@riede.org
- * - Get drive's actual block size from mode sense block descriptor
- * - Limit size of pipeline
- * Ver 1.17b Oct 2002 Alan Stern <stern@rowland.harvard.edu>
- * Changed IDETAPE_MIN_PIPELINE_STAGES to 1 and actually used
- * it in the code!
- * Actually removed aborted stages in idetape_abort_pipeline
- * instead of just changing the command code.
- * Made the transfer byte count for Request Sense equal to the
- * actual length of the data transfer.
- * Changed handling of partial data transfers: they do not
- * cause DMA errors.
- * Moved initiation of DMA transfers to the correct place.
- * Removed reference to unallocated memory.
- * Made __idetape_discard_read_pipeline return the number of
- * sectors skipped, not the number of stages.
- * Replaced errant kfree() calls with __idetape_kfree_stage().
- * Fixed off-by-one error in testing the pipeline length.
- * Fixed handling of filemarks in the read pipeline.
- * Small code optimization for MTBSF and MTBSFM ioctls.
- * Don't try to unlock the door during device close if is
- * already unlocked!
- * Cosmetic fixes to miscellaneous debugging output messages.
- * Set the minimum /proc/ide/hd?/settings values for "pipeline",
- * "pipeline_min", and "pipeline_max" to 1.
- */
deleted file mode 100644
@@ -1,17 +0,0 @@
-Changelog for ide cd
---------------------
-
- .. include:: ChangeLog.ide-cd.1994-2004
- :literal:
-
-Changelog for ide floppy
-------------------------
-
- .. include:: ChangeLog.ide-floppy.1996-2002
- :literal:
-
-Changelog for ide tape
-----------------------
-
- .. include:: ChangeLog.ide-tape.1995-2002
- :literal:
deleted file mode 100644
@@ -1,68 +0,0 @@
-===============================
-IDE ATAPI streaming tape driver
-===============================
-
-This driver is a part of the Linux ide driver.
-
-The driver, in co-operation with ide.c, basically traverses the
-request-list for the block device interface. The character device
-interface, on the other hand, creates new requests, adds them
-to the request-list of the block device, and waits for their completion.
-
-The block device major and minor numbers are determined from the
-tape's relative position in the ide interfaces, as explained in ide.c.
-
-The character device interface consists of the following devices::
-
- ht0 major 37, minor 0 first IDE tape, rewind on close.
- ht1 major 37, minor 1 second IDE tape, rewind on close.
- ...
- nht0 major 37, minor 128 first IDE tape, no rewind on close.
- nht1 major 37, minor 129 second IDE tape, no rewind on close.
- ...
-
-The general magnetic tape commands compatible interface, as defined by
-include/linux/mtio.h, is accessible through the character device.
-
-General ide driver configuration options, such as the interrupt-unmask
-flag, can be configured by issuing an ioctl to the block device interface,
-as any other ide device.
-
-Our own ide-tape ioctl's can be issued to either the block device or
-the character device interface.
-
-Maximal throughput with minimal bus load will usually be achieved in the
-following scenario:
-
- 1. ide-tape is operating in the pipelined operation mode.
- 2. No buffering is performed by the user backup program.
-
-Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive.
-
-Here are some words from the first releases of hd.c, which are quoted
-in ide.c and apply here as well:
-
-* Special care is recommended. Have Fun!
-
-Possible improvements
-=====================
-
-1. Support for the ATAPI overlap protocol.
-
-In order to maximize bus throughput, we currently use the DSC
-overlap method which enables ide.c to service requests from the
-other device while the tape is busy executing a command. The
-DSC overlap method involves polling the tape's status register
-for the DSC bit, and servicing the other device while the tape
-isn't ready.
-
-In the current QIC development standard (December 1995),
-it is recommended that new tape drives will *in addition*
-implement the ATAPI overlap protocol, which is used for the
-same purpose - efficient use of the IDE bus, but is interrupt
-driven and thus has much less CPU overhead.
-
-ATAPI overlap is likely to be supported in most new ATAPI
-devices, including new ATAPI cdroms, and thus provides us
-a method by which we can achieve higher throughput when
-sharing a (fast) ATA-2 disk with any (slow) new ATAPI device.
deleted file mode 100644
@@ -1,265 +0,0 @@
-============================================
-Information regarding the Enhanced IDE drive
-============================================
-
- The hdparm utility can be used to control various IDE features on a
- running system. It is packaged separately. Please Look for it on popular
- linux FTP sites.
-
--------------------------------------------------------------------------------
-
-.. important::
-
- BUGGY IDE CHIPSETS CAN CORRUPT DATA!!
-
- PCI versions of the CMD640 and RZ1000 interfaces are now detected
- automatically at startup when PCI BIOS support is configured.
-
- Linux disables the "prefetch" ("readahead") mode of the RZ1000
- to prevent data corruption possible due to hardware design flaws.
-
- For the CMD640, linux disables "IRQ unmasking" (hdparm -u1) on any
- drive for which the "prefetch" mode of the CMD640 is turned on.
- If "prefetch" is disabled (hdparm -p8), then "IRQ unmasking" can be
- used again.
-
- For the CMD640, linux disables "32bit I/O" (hdparm -c1) on any drive
- for which the "prefetch" mode of the CMD640 is turned off.
- If "prefetch" is enabled (hdparm -p9), then "32bit I/O" can be
- used again.
-
- The CMD640 is also used on some Vesa Local Bus (VLB) cards, and is *NOT*
- automatically detected by Linux. For safe, reliable operation with such
- interfaces, one *MUST* use the "cmd640.probe_vlb" kernel option.
-
- Use of the "serialize" option is no longer necessary.
-
--------------------------------------------------------------------------------
-
-Common pitfalls
-===============
-
-- 40-conductor IDE cables are capable of transferring data in DMA modes up to
- udma2, but no faster.
-
-- If possible devices should be attached to separate channels if they are
- available. Typically the disk on the first and CD-ROM on the second.
-
-- If you mix devices on the same cable, please consider using similar devices
- in respect of the data transfer mode they support.
-
-- Even better try to stick to the same vendor and device type on the same
- cable.
-
-This is the multiple IDE interface driver, as evolved from hd.c
-===============================================================
-
-It supports up to 9 IDE interfaces per default, on one or more IRQs (usually
-14 & 15). There can be up to two drives per interface, as per the ATA-6 spec.::
-
- Primary: ide0, port 0x1f0; major=3; hda is minor=0; hdb is minor=64
- Secondary: ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64
- Tertiary: ide2, port 0x1e8; major=33; hde is minor=0; hdf is minor=64
- Quaternary: ide3, port 0x168; major=34; hdg is minor=0; hdh is minor=64
- fifth.. ide4, usually PCI, probed
- sixth.. ide5, usually PCI, probed
-
-To access devices on interfaces > ide0, device entries please make sure that
-device files for them are present in /dev. If not, please create such
-entries, by using /dev/MAKEDEV.
-
-This driver automatically probes for most IDE interfaces (including all PCI
-ones), for the drives/geometries attached to those interfaces, and for the IRQ
-lines being used by the interfaces (normally 14, 15 for ide0/ide1).
-
-Any number of interfaces may share a single IRQ if necessary, at a slight
-performance penalty, whether on separate cards or a single VLB card.
-The IDE driver automatically detects and handles this. However, this may
-or may not be harmful to your hardware.. two or more cards driving the same IRQ
-can potentially burn each other's bus driver, though in practice this
-seldom occurs. Be careful, and if in doubt, don't do it!
-
-Drives are normally found by auto-probing and/or examining the CMOS/BIOS data.
-For really weird situations, the apparent (fdisk) geometry can also be specified
-on the kernel "command line" using LILO. The format of such lines is::
-
- ide_core.chs=[interface_number.device_number]:cyls,heads,sects
-
-or::
-
- ide_core.cdrom=[interface_number.device_number]
-
-For example::
-
- ide_core.chs=1.0:1050,32,64 ide_core.cdrom=1.1
-
-The results of successful auto-probing may override the physical geometry/irq
-specified, though the "original" geometry may be retained as the "logical"
-geometry for partitioning purposes (fdisk).
-
-If the auto-probing during boot time confuses a drive (ie. the drive works
-with hd.c but not with ide.c), then an command line option may be specified
-for each drive for which you'd like the drive to skip the hardware
-probe/identification sequence. For example::
-
- ide_core.noprobe=0.1
-
-or::
-
- ide_core.chs=1.0:768,16,32
- ide_core.noprobe=1.0
-
-Note that when only one IDE device is attached to an interface, it should be
-jumpered as "single" or "master", *not* "slave". Many folks have had
-"trouble" with cdroms because of this requirement, so the driver now probes
-for both units, though success is more likely when the drive is jumpered
-correctly.
-
-Courtesy of Scott Snyder and others, the driver supports ATAPI cdrom drives
-such as the NEC-260 and the new MITSUMI triple/quad speed drives.
-Such drives will be identified at boot time, just like a hard disk.
-
-If for some reason your cdrom drive is *not* found at boot time, you can force
-the probe to look harder by supplying a kernel command line parameter
-via LILO, such as:::
-
- ide_core.cdrom=1.0 /* "master" on second interface (hdc) */
-
-or::
-
- ide_core.cdrom=1.1 /* "slave" on second interface (hdd) */
-
-For example, a GW2000 system might have a hard drive on the primary
-interface (/dev/hda) and an IDE cdrom drive on the secondary interface
-(/dev/hdc). To mount a CD in the cdrom drive, one would use something like::
-
- ln -sf /dev/hdc /dev/cdrom
- mkdir /mnt/cdrom
- mount /dev/cdrom /mnt/cdrom -t iso9660 -o ro
-
-If, after doing all of the above, mount doesn't work and you see
-errors from the driver (with dmesg) complaining about `status=0xff`,
-this means that the hardware is not responding to the driver's attempts
-to read it. One of the following is probably the problem:
-
- - Your hardware is broken.
-
- - You are using the wrong address for the device, or you have the
- drive jumpered wrong. Review the configuration instructions above.
-
- - Your IDE controller requires some nonstandard initialization sequence
- before it will work properly. If this is the case, there will often
- be a separate MS-DOS driver just for the controller. IDE interfaces
- on sound cards usually fall into this category. Such configurations
- can often be made to work by first booting MS-DOS, loading the
- appropriate drivers, and then warm-booting linux (without powering
- off). This can be automated using loadlin in the MS-DOS autoexec.
-
-If you always get timeout errors, interrupts from the drive are probably
-not making it to the host. Check how you have the hardware jumpered
-and make sure it matches what the driver expects (see the configuration
-instructions above). If you have a PCI system, also check the BIOS
-setup; I've had one report of a system which was shipped with IRQ 15
-disabled by the BIOS.
-
-The kernel is able to execute binaries directly off of the cdrom,
-provided it is mounted with the default block size of 1024 (as above).
-
-Please pass on any feedback on any of this stuff to the maintainer,
-whose address can be found in linux/MAINTAINERS.
-
-The IDE driver is modularized. The high level disk/CD-ROM/tape/floppy
-drivers can always be compiled as loadable modules, the chipset drivers
-can only be compiled into the kernel, and the core code (ide.c) can be
-compiled as a loadable module provided no chipset support is needed.
-
-When using ide.c as a module in combination with kmod, add::
-
- alias block-major-3 ide-probe
-
-to a configuration file in /etc/modprobe.d/.
-
-When ide.c is used as a module, you can pass command line parameters to the
-driver using the "options=" keyword to insmod, while replacing any ',' with
-';'.
-
-
-Summary of ide driver parameters for kernel command line
-========================================================
-
-For legacy IDE VLB host drivers (ali14xx/dtc2278/ht6560b/qd65xx/umc8672)
-you need to explicitly enable probing by using "probe" kernel parameter,
-i.e. to enable probing for ALI M14xx chipsets (ali14xx host driver) use:
-
-* "ali14xx.probe" boot option when ali14xx driver is built-in the kernel
-
-* "probe" module parameter when ali14xx driver is compiled as module
- ("modprobe ali14xx probe")
-
-Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb"
-kernel paremeter to enable probing for VLB version of the chipset (PCI ones
-are detected automatically).
-
-You also need to use "probe" kernel parameter for ide-4drives driver
-(support for IDE generic chipset with four drives on one port).
-
-To enable support for IDE doublers on Amiga use "doubler" kernel parameter
-for gayle host driver (i.e. "gayle.doubler" if the driver is built-in).
-
-To force ignoring cable detection (this should be needed only if you're using
-short 40-wires cable which cannot be automatically detected - if this is not
-a case please report it as a bug instead) use "ignore_cable" kernel parameter:
-
-* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in
- (i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1")
-
-* "ignore_cable=[interface_number]" module parameter (for ide_core module)
- if IDE is compiled as module
-
-Other kernel parameters for ide_core are:
-
-* "nodma=[interface_number.device_number]" to disallow DMA for a device
-
-* "noflush=[interface_number.device_number]" to disable flush requests
-
-* "nohpa=[interface_number.device_number]" to disable Host Protected Area
-
-* "noprobe=[interface_number.device_number]" to skip probing
-
-* "nowerr=[interface_number.device_number]" to ignore the WRERR_STAT bit
-
-* "cdrom=[interface_number.device_number]" to force device as a CD-ROM
-
-* "chs=[interface_number.device_number]" to force device as a disk (using CHS)
-
-
-Some Terminology
-================
-
-IDE
- Integrated Drive Electronics, meaning that each drive has a built-in
- controller, which is why an "IDE interface card" is not a "controller card".
-
-ATA
- AT (the old IBM 286 computer) Attachment Interface, a draft American
- National Standard for connecting hard drives to PCs. This is the official
- name for "IDE".
-
- The latest standards define some enhancements, known as the ATA-6 spec,
- which grew out of vendor-specific "Enhanced IDE" (EIDE) implementations.
-
-ATAPI
- ATA Packet Interface, a new protocol for controlling the drives,
- similar to SCSI protocols, created at the same time as the ATA2 standard.
- ATAPI is currently used for controlling CDROM, TAPE and FLOPPY (ZIP or
- LS120/240) devices, removable R/W cartridges, and for high capacity hard disk
- drives.
-
-mlord@pobox.com
-
-
-Wed Apr 17 22:52:44 CEST 2002 edited by Marcin Dalecki, the current
-maintainer.
-
-Wed Aug 20 22:31:29 CEST 2003 updated ide boot options to current ide.c
-comments at 2.6.0-test4 time. Maciej Soltysiak <solt@dns.toxicfilms.tv>
deleted file mode 100644
@@ -1,21 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-==================================
-Integrated Drive Electronics (IDE)
-==================================
-
-.. toctree::
- :maxdepth: 1
-
- ide
- ide-tape
- warm-plug-howto
-
- changelogs
-
-.. only:: subproject and html
-
- Indices
- =======
-
- * :ref:`genindex`
deleted file mode 100644
@@ -1,18 +0,0 @@
-===================
-IDE warm-plug HOWTO
-===================
-
-To warm-plug devices on a port 'idex'::
-
- # echo -n "1" > /sys/class/ide_port/idex/delete_devices
-
-unplug old device(s) and plug new device(s)::
-
- # echo -n "1" > /sys/class/ide_port/idex/scan
-
-done
-
-NOTE: please make sure that partitions are unmounted and that there are
-no other active references to devices before doing "delete_devices" step,
-also do not attempt "scan" step on devices currently in use -- otherwise
-results may be unpredictable and lead to data loss if you're unlucky
@@ -103,7 +103,6 @@ needed).
block/index
cdrom/index
cpu-freq/index
- ide/index
fb/index
fpga/index
hid/index
Drop all Documentation/ide/ since IDE support was deleted by Christoph Hellwig <hch@lst.de>, Jun 16 2021. Fixes: b7fb14d3ac63 ("ide: remove the legacy ide driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-ide@vger.kernel.org Cc: linux-block@vger.kernel.org --- Documentation/ide/ChangeLog.ide-cd.1994-2004 | 268 ------------------ .../ide/ChangeLog.ide-floppy.1996-2002 | 63 ---- .../ide/ChangeLog.ide-tape.1995-2002 | 257 ----------------- Documentation/ide/changelogs.rst | 17 -- Documentation/ide/ide-tape.rst | 68 ----- Documentation/ide/ide.rst | 265 ----------------- Documentation/ide/index.rst | 21 -- Documentation/ide/warm-plug-howto.rst | 18 -- Documentation/index.rst | 1 - 9 files changed, 978 deletions(-) delete mode 100644 Documentation/ide/ChangeLog.ide-cd.1994-2004 delete mode 100644 Documentation/ide/ChangeLog.ide-floppy.1996-2002 delete mode 100644 Documentation/ide/ChangeLog.ide-tape.1995-2002 delete mode 100644 Documentation/ide/changelogs.rst delete mode 100644 Documentation/ide/ide-tape.rst delete mode 100644 Documentation/ide/ide.rst delete mode 100644 Documentation/ide/index.rst delete mode 100644 Documentation/ide/warm-plug-howto.rst