@@ -1225,85 +1225,7 @@ Provides counts of softirq handlers serviced since boot time, for each CPU.
HRTIMER: 0 0 0 0
RCU: 1678 1769 2178 2250
-
-1.3 IDE devices in /proc/ide
-----------------------------
-
-The subdirectory /proc/ide contains information about all IDE devices of which
-the kernel is aware. There is one subdirectory for each IDE controller, the
-file drivers and a link for each IDE device, pointing to the device directory
-in the controller specific subtree.
-
-The file 'drivers' contains general information about the drivers used for the
-IDE devices::
-
- > cat /proc/ide/drivers
- ide-cdrom version 4.53
- ide-disk version 1.08
-
-More detailed information can be found in the controller specific
-subdirectories. These are named ide0, ide1 and so on. Each of these
-directories contains the files shown in table 1-6.
-
-
-.. table:: Table 1-6: IDE controller info in /proc/ide/ide?
-
- ======= =======================================
- File Content
- ======= =======================================
- channel IDE channel (0 or 1)
- config Configuration (only for PCI/IDE bridge)
- mate Mate name
- model Type/Chipset of IDE controller
- ======= =======================================
-
-Each device connected to a controller has a separate subdirectory in the
-controllers directory. The files listed in table 1-7 are contained in these
-directories.
-
-
-.. table:: Table 1-7: IDE device information
-
- ================ ==========================================
- File Content
- ================ ==========================================
- cache The cache
- capacity Capacity of the medium (in 512Byte blocks)
- driver driver and version
- geometry physical and logical geometry
- identify device identify block
- media media type
- model device identifier
- settings device setup
- smart_thresholds IDE disk management thresholds
- smart_values IDE disk management values
- ================ ==========================================
-
-The most interesting file is ``settings``. This file contains a nice
-overview of the drive parameters::
-
- # cat /proc/ide/ide0/hda/settings
- name value min max mode
- ---- ----- --- --- ----
- bios_cyl 526 0 65535 rw
- bios_head 255 0 255 rw
- bios_sect 63 0 63 rw
- breada_readahead 4 0 127 rw
- bswap 0 0 1 r
- file_readahead 72 0 2097151 rw
- io_32bit 0 0 3 rw
- keepsettings 0 0 1 rw
- max_kb_per_request 122 1 127 rw
- multcount 0 0 8 rw
- nice1 1 0 1 rw
- nowerr 0 0 1 rw
- pio_mode write-only 0 255 w
- slow 0 0 1 rw
- unmaskirq 0 0 1 rw
- using_dma 0 0 1 rw
-
-
-1.4 Networking info in /proc/net
+1.3 Networking info in /proc/net
--------------------------------
The subdirectory /proc/net follows the usual pattern. Table 1-8 shows the
@@ -1382,7 +1304,7 @@ It will contain information that is specific to that bond, such as the
current slaves of the bond, the link status of the slaves, and how
many times the slaves link has failed.
-1.5 SCSI info
+1.4 SCSI info
-------------
If you have a SCSI host adapter in your system, you'll find a subdirectory
@@ -1445,7 +1367,7 @@ AHA-2940 SCSI adapter::
Total transfers 0 (0 reads and 0 writes)
-1.6 Parallel port info in /proc/parport
+1.5 Parallel port info in /proc/parport
---------------------------------------
The directory /proc/parport contains information about the parallel ports of
@@ -1470,7 +1392,7 @@ These directories contain the four files shown in Table 1-10.
number or none).
========= ====================================================================
-1.7 TTY info in /proc/tty
+1.6 TTY info in /proc/tty
-------------------------
Information about the available and actually used tty's can be found in the
@@ -1505,7 +1427,7 @@ To see which tty's are currently in use, you can simply look into the file
unknown /dev/tty 4 1-63 console
-1.8 Miscellaneous kernel statistics in /proc/stat
+1.7 Miscellaneous kernel statistics in /proc/stat
-------------------------------------------------
Various pieces of information about kernel activity are available in the
@@ -1578,7 +1500,7 @@ softirqs serviced; each subsequent column is the total for that particular
softirq.
-1.9 Ext4 file system parameters
+1.8 Ext4 file system parameters
-------------------------------
Information about mounted ext4 file systems can be found in
@@ -1594,7 +1516,7 @@ in Table 1-12, below.
mb_groups details of multiblock allocator buddy cache of free blocks
============== ==========================================================
-1.10 /proc/consoles
+1.9 /proc/consoles
-------------------
Shows registered system console lines.
@@ -12,7 +12,7 @@
* Theory of operation:
*
* At the lowest level, there is the standard driver for the CD/DVD device,
- * typically ide-cd.c or sr.c. This driver can handle read and write requests,
+ * such as drivers/scsi/sr.c. This driver can handle read and write requests,
* but it doesn't know anything about the special restrictions that apply to
* packet writing. One restriction is that write requests must be aligned to
* packet boundaries on the physical media, and the size of a write request