new file mode 100755
@@ -0,0 +1,131 @@
+#! /bin/bash
+# FS QA Test No. btrfs/316
+#
+# Testing cross-subvolume sparse copy on btrfs
+# - Create two subvolumes, mount one of them
+# - Create a file on each (sub/root)volume,
+# reflink them on the other volumes
+# - Change one original and two reflinked files
+# - Move reflinked files between subvolumes
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2013, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ umount $SCRATCH_MNT
+ rm -rf $TESTDIR1
+ rm -rf $TESTDIR2
+ btrfs subvolume delete $SUBVOL1 >> $seqres.full
+ btrfs subvolume delete $SUBVOL2 >> $seqres.full
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+
+_require_scratch
+_require_cp_reflink
+
+_checksum_files() {
+ for F in file1 file2 file3
+ do
+ echo "$F:"
+ for D in $TESTDIR1 $SCRATCH_MNT $SUBVOL2
+ do
+ _md5_checksum $D/$F
+ done
+ done
+}
+
+TESTDIR1=$TEST_DIR/test-$seq-1
+TESTDIR2=$TEST_DIR/test-$seq-2
+SUBVOL1=$TEST_DIR/subvol-$seq-1
+SUBVOL2=$TEST_DIR/subvol-$seq-2
+
+_scratch_unmount 2>/dev/null
+rm -rf $seqres.full
+rm -rf $TESTDIR1 $TESTDIR2
+btrfs subvol delete $SUBVOL1 >/dev/null 2>&1
+btrfs subvol delete $SUBVOL2 >/dev/null 2>&1
+
+mkdir $TESTDIR1
+mkdir $TESTDIR2
+btrfs subvolume create $SUBVOL1 >> $seqres.full
+btrfs subvolume create $SUBVOL2 >> $seqres.full
+_mount -t btrfs -o subvol=subvol-$seq-1 $TEST_DEV $SCRATCH_MNT
+
+echo "Create initial files"
+# TESTDIR1/file1 is very small and will be inlined
+$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 10' $TESTDIR1/file1 >> $seqres.full
+$XFS_IO_PROG -f -c 'pwrite -S 0x62 0 13000' $SCRATCH_MNT/file2 >> $seqres.full
+$XFS_IO_PROG -f -c 'pwrite -S 0x63 0 17000' $SUBVOL2/file3 >> $seqres.full
+
+echo "Create reflinks to the initial files on other subvolumes"
+cp --reflink $TESTDIR1/file1 $SUBVOL1
+cp --reflink $TESTDIR1/file1 $SUBVOL2
+cp --reflink $SUBVOL1/file2 $TESTDIR1/
+cp --reflink $SUBVOL1/file2 $SUBVOL2
+cp --reflink $SUBVOL2/file3 $TESTDIR1/
+cp --reflink $SUBVOL2/file3 $SUBVOL1
+
+echo "Verify the reflinks"
+_verify_reflink $SCRATCH_MNT/file2 $TESTDIR1/file2
+_verify_reflink $SCRATCH_MNT/file2 $SUBVOL2/file2
+_verify_reflink $SUBVOL2/file3 $TESTDIR1/file3
+_verify_reflink $SUBVOL2/file3 $SCRATCH_MNT/file3
+echo "Verify the file contents:"
+_checksum_files
+
+echo -e "---\nOverwrite some files with new content"
+$XFS_IO_PROG -c 'pwrite -S 0x64 0 20' $TESTDIR1/file1 >> $seqres.full
+$XFS_IO_PROG -c 'pwrite -S 0x66 0 21000' $SUBVOL2/file2 >> $seqres.full
+$XFS_IO_PROG -c 'pwrite -S 0x65 5000 5000' $SCRATCH_MNT/file3 >> $seqres.full
+
+echo "Verify that non-overwritten reflinks still have the same data blocks"
+_verify_reflink $TESTDIR1/file2 $SCRATCH_MNT/file2
+_verify_reflink $TESTDIR1/file3 $SUBVOL2/file3
+echo "Verify the file contents:"
+_checksum_files
+
+echo -e "---\nShuffle files between directories"
+mv $TESTDIR1/file* $TESTDIR2
+mv $SCRATCH_MNT/file* $TESTDIR1/
+mv $SUBVOL2/file* $SCRATCH_MNT/
+mv $TESTDIR2/file* $SUBVOL2/
+
+# No _verify_reflink here as data is copied when moving files between subvols
+echo "Verify the file contents:"
+_checksum_files
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,48 @@
+QA output created by 316
+Create initial files
+Create reflinks to the initial files on other subvolumes
+Verify the reflinks
+Verify the file contents:
+file1:
+e09c80c42fda55f9d992e59ca6b3307d
+e09c80c42fda55f9d992e59ca6b3307d
+e09c80c42fda55f9d992e59ca6b3307d
+file2:
+d7402b46310fbbfbc5e466b1dccb043b
+d7402b46310fbbfbc5e466b1dccb043b
+d7402b46310fbbfbc5e466b1dccb043b
+file3:
+5a95800e4c04b11117aa4e4de057721f
+5a95800e4c04b11117aa4e4de057721f
+5a95800e4c04b11117aa4e4de057721f
+---
+Overwrite some files with new content
+Verify that non-overwritten reflinks still have the same data blocks
+Verify the file contents:
+file1:
+00d620f69f30327f0f8946b95c12de44
+e09c80c42fda55f9d992e59ca6b3307d
+e09c80c42fda55f9d992e59ca6b3307d
+file2:
+d7402b46310fbbfbc5e466b1dccb043b
+d7402b46310fbbfbc5e466b1dccb043b
+917619ae44b38bb9968af261c3c45440
+file3:
+5a95800e4c04b11117aa4e4de057721f
+b9f275cd638cb784c9e61def94c622a8
+5a95800e4c04b11117aa4e4de057721f
+---
+Shuffle files between directories
+Verify the file contents:
+file1:
+e09c80c42fda55f9d992e59ca6b3307d
+e09c80c42fda55f9d992e59ca6b3307d
+00d620f69f30327f0f8946b95c12de44
+file2:
+d7402b46310fbbfbc5e466b1dccb043b
+917619ae44b38bb9968af261c3c45440
+d7402b46310fbbfbc5e466b1dccb043b
+file3:
+b9f275cd638cb784c9e61def94c622a8
+5a95800e4c04b11117aa4e4de057721f
+5a95800e4c04b11117aa4e4de057721f
@@ -9,3 +9,4 @@
276 auto rw metadata
284 auto
307 auto quick
+316 auto quick reflink
This testscript creates reflinks to files on different subvolumes, overwrites the original files and reflinks, and moves reflinked files between subvolumes. Signed-off-by: Koen De Wit <koen.de.wit@oracle.com> --- Two new common/rc functions used in this script (_require_cp_reflink and _verify_reflink) have been submitted recently: http://oss.sgi.com/archives/xfs/2013-05/msg00745.html Changelog: v3 -> v4: Cleaning up commit message, cutting out filenames from output when printing md5sums, adding to group "reflink" v2 -> v3: Fixing wrapped patch v1 -> v2: Renamed 302 -> 316, changes made based on comments from Eric Sandeen: http://oss.sgi.com/archives/xfs/2013-03/msg00231.html tests/btrfs/316 | 131 ++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/316.out | 48 +++++++++++++++++++ tests/btrfs/group | 1 + 3 files changed, 180 insertions(+), 0 deletions(-) create mode 100755 tests/btrfs/316 create mode 100644 tests/btrfs/316.out