new file mode 100755
@@ -0,0 +1,376 @@
+#! /bin/bash
+# FS QA Test No. btrfs/045
+#
+# Regression test for a btrfs incremental send issue where the kernel failed
+# to build paths strings. This resulted either in sending a wrong path string
+# to the send stream or entering an infinite loop when building it.
+# This happened in the following scenarios:
+#
+# 1) A directory was made a child of another directory which has a lower inode
+# number and has a pending move/rename operation or there's some non-direct
+# ancestor directory with a higher inode number that was renamed/moved too.
+# This made the incremental send code go into an infinite loop when building
+# a path string;
+#
+# 2) A directory was made a child of another directory which has a higher inode
+# number, but the new parent wasn't moved nor renamed. Instead some other
+# ancestor higher in the hierarchy, with an higher inode number too, was
+# moved/renamed too. This made the incremental send code go into an infinite
+# loop when building a path string;
+#
+# 3) An orphan directory is created and at least one of its non-immediate
+# descendent directories have a pending move/rename operation. This made
+# an incremental send issue to the send stream an invalid path string that
+# didn't account for the orphan ancestor directory.
+#
+# These issues are fixed by the following linux kernel btrfs patches:
+#
+# Btrfs: fix incremental send's decision to delay a dir move/rename
+# Btrfs: part 2, fix incremental send's decision to delay a dir move/rename
+# Btrfs: send, fix more issues related to directory renames
+# Btrfs: send, account for orphan directories when building path strings
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2014 Filipe Manana. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+tmp=`mktemp -d`
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ rm -fr $tmp
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch
+_require_fssum
+_need_to_be_root
+
+rm -f $seqres.full
+
+_scratch_mkfs >/dev/null 2>&1
+_scratch_mount
+
+# case 1), mentioned above
+mkdir -p $SCRATCH_MNT/a/b
+mkdir $SCRATCH_MNT/a/c
+mkdir $SCRATCH_MNT/a/b/d
+touch $SCRATCH_MNT/a/file1
+touch $SCRATCH_MNT/a/b/file2
+mv $SCRATCH_MNT/a/file1 $SCRATCH_MNT/a/b/d/file3
+ln $SCRATCH_MNT/a/b/d/file3 $SCRATCH_MNT/a/b/file4
+mkdir $SCRATCH_MNT/a/b/f
+mv $SCRATCH_MNT/a/b $SCRATCH_MNT/a/c/b2
+touch $SCRATCH_MNT/a/c/b2/d/file5
+
+# case 2), mentioned above
+mkdir -p $SCRATCH_MNT/a/x1/x2
+mkdir $SCRATCH_MNT/a/Z
+mkdir -p $SCRATCH_MNT/a/x1/x2/x3/x4/x5
+
+# case 2) again, but a more complex scenario
+mkdir -p $SCRATCH_MNT/_a/_b/_c/_d
+mkdir $SCRATCH_MNT/_a/_b/_c/_d/_e
+mkdir $SCRATCH_MNT/_a/_b/_c/_d/_f
+mv $SCRATCH_MNT/_a/_b/_c/_d/_e $SCRATCH_MNT/_a/_b/_c/_d/_f/_E2
+mkdir $SCRATCH_MNT/_a/_b/_c/_g
+mv $SCRATCH_MNT/_a/_b/_c/_d $SCRATCH_MNT/_a/_b/_D2
+
+# case 3), mentioned above
+mkdir -p $SCRATCH_MNT/za/zb/zc/zd
+mkdir $SCRATCH_MNT/za/zb/ze
+mv $SCRATCH_MNT/za/zb/zc $SCRATCH_MNT/za/zb/ze/zCC
+mkdir $SCRATCH_MNT/za/zb/ze/zCC/zd/zf
+mkdir $SCRATCH_MNT/za/zg
+
+# case 1), more complex scenario
+mkdir -p $SCRATCH_MNT/y_a/y_b
+mkdir -p $SCRATCH_MNT/y_a/y_c/y_d
+mkdir $SCRATCH_MNT/y_a/y_b/y_e
+mkdir $SCRATCH_MNT/y_a/y_c/y_d/y_f
+mv $SCRATCH_MNT/y_a/y_b $SCRATCH_MNT/y_a/y_c/y_d/y_2b
+mkdir $SCRATCH_MNT/y_a/y_x
+mkdir $SCRATCH_MNT/y_a/y_y
+
+# case 1), variation of previous scenario with a subtree is moved into
+# a directory created after creating the parent snapshot
+mkdir -p $SCRATCH_MNT/w_a/w_b
+mkdir -p $SCRATCH_MNT/w_a/w_c/w_d
+mkdir $SCRATCH_MNT/w_a/w_b/w_e
+mkdir $SCRATCH_MNT/w_a/w_c/w_d/w_f
+mv $SCRATCH_MNT/w_a/w_b $SCRATCH_MNT/w_a/w_c/w_d/w_2b
+
+mkdir -p $SCRATCH_MNT/xa/xb
+mkdir $SCRATCH_MNT/xa/xc
+mv $SCRATCH_MNT/xa/xb $SCRATCH_MNT/xa/xc/xb2
+mkdir $SCRATCH_MNT/xa/xe
+
+mkdir -p $SCRATCH_MNT/%a/%b
+mkdir $SCRATCH_MNT/%a/%c
+mkdir $SCRATCH_MNT/%a/%b/%d
+mkdir $SCRATCH_MNT/%a/%c/%e
+
+# Filesystem looks like:
+#
+# . (ino 256)
+# |-- a/ (ino 257)
+# | |-- c/ (ino 259)
+# | | |-- b2/ (ino 258)
+# | | |-- d/ (ino 260)
+# | | | |-- file3 (ino 261)
+# | | | |-- file5 (ino 264)
+# | | |
+# | | |-- file2 (ino 262)
+# | | |-- file4 (ino 261)
+# | | |-- f/ (ino 263)
+# | |
+# | |-- x1/ (ino 265)
+# | | |-- x2/ (ino 266)
+# | | |-- x3/ (ino 268)
+# | | |-- x4/ (ino 269)
+# | | |-- x5/ (ino 270)
+# | |
+# | |-- Z/ (ino 267)
+# |
+# |-- _a/ (ino 271)
+# | |-- _b/ (ino 272)
+# | |-- _c/ (ino 273)
+# | | |-- _g/ (ino 277)
+# | |
+# | |-- _D2/ (ino 274)
+# | |-- _f/ (ino 276)
+# | |-- _E2/ (ino 275)
+# |
+# |-- za/ (ino 278)
+# | |-- zb/ (ino 279)
+# | | |-- ze/ (ino 282)
+# | | |-- zCC/ (ino 280)
+# | | |-- zd/ (ino 281)
+# | | |-- zf/ (ino 283)
+# | |
+# | |-- zg/ (ino 284)
+# |
+# |-- y_a/ (ino 285)
+# | |-- y_c/ (ino 287)
+# | | |-- y_d/ (ino 288)
+# | | |-- y_2b/ (ino 286)
+# | | | |-- y_e/ (ino 289)
+# | | |
+# | | |-- y_f/ (ino 290)
+# | |
+# | |-- y_x/ (ino 291)
+# | |-- y_y/ (ino 292)
+# |
+# |-- w_a/ (ino 293)
+# | |-- w_c/ (ino 295)
+# | |-- w_d/ (ino 296)
+# | |-- w_2b/ (ino 294)
+# | | |-- w_e/ (ino 297)
+# | |
+# | |-- w_f/ (ino 298)
+# |
+# |-- xa/ (ino 299)
+# | |-- xc/ (ino 301)
+# | | |-- xb2/ (ino 300)
+# | |
+# | |-- xe/ (ino 302)
+# |
+# |-- %a/ (ino 303)
+# |-- %b/ (ino 304)
+# | |-- %d/ (ino 306)
+# |
+# |-- %c/ (ino 305)
+# |-- %e/ (ino 307)
+
+_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap1
+
+# case 1), mentioned above
+ln $SCRATCH_MNT/a/c/b2/file4 $SCRATCH_MNT/a/c/b2/f/file6
+mv $SCRATCH_MNT/a/c/b2/d/file5 $SCRATCH_MNT/a/c/file7
+touch $SCRATCH_MNT/a/c/b2/d/file8
+touch $SCRATCH_MNT/a/c/b2/file9
+ln $SCRATCH_MNT/a/c/b2/file9 $SCRATCH_MNT/a/c/b2/file10
+mv $SCRATCH_MNT/a/c/b2/f $SCRATCH_MNT/a/f2
+mv $SCRATCH_MNT/a/c $SCRATCH_MNT/a/c2
+mv $SCRATCH_MNT/a/c2/b2 $SCRATCH_MNT/a/f2/b3
+mv $SCRATCH_MNT/a/c2 $SCRATCH_MNT/a/f2/b3/c3
+touch $SCRATCH_MNT/a/f2/b3/c3/file11
+mv $SCRATCH_MNT/a $SCRATCH_MNT/a2
+
+# case 2), mentioned above
+mv $SCRATCH_MNT/a2/x1/x2/x3 $SCRATCH_MNT/a2/Z/X33
+mv $SCRATCH_MNT/a2/x1/x2 $SCRATCH_MNT/a2/Z/X33/x4/x5/X22
+
+# case 2) again, but a more complex scenario
+mkdir $SCRATCH_MNT/_a/_o
+mv $SCRATCH_MNT/_a/_b/_c/_g $SCRATCH_MNT/_a/_b/_D2/_f/_G2
+mv $SCRATCH_MNT/_a/_b/_D2 $SCRATCH_MNT/_a/_b/_dd
+mv $SCRATCH_MNT/_a/_b/_c $SCRATCH_MNT/_a/_C2
+mv $SCRATCH_MNT/_a/_b/_dd/_f $SCRATCH_MNT/_a/_o/_FF
+mv $SCRATCH_MNT/_a/_b $SCRATCH_MNT/_a/_o/_FF/_E2/_BB
+
+# case 3), mentioned above
+mkdir $SCRATCH_MNT/za/zg/zh
+mv $SCRATCH_MNT/za/zb/ze $SCRATCH_MNT/za/zg/zh/zEE
+mv $SCRATCH_MNT/za/zg/zh/zEE/zCC/zd $SCRATCH_MNT/za/zg/zh/zEE/zDD
+mv $SCRATCH_MNT/za/zg/zh/zEE/zDD/zf $SCRATCH_MNT/za/zg/zh/zEE/zDD/zFF
+
+# case 1), more complex scenario
+mv $SCRATCH_MNT/y_a/y_x $SCRATCH_MNT/y_a/y_y
+mv $SCRATCH_MNT/y_a/y_c/y_d/y_2b/y_e $SCRATCH_MNT/y_a/y_c/y_d/y_2b/y_2e
+mv $SCRATCH_MNT/y_a/y_c/y_d $SCRATCH_MNT/y_a/y_y/y_x/y_2d
+mv $SCRATCH_MNT/y_a/y_c $SCRATCH_MNT/y_a/y_y/y_x/y_2d/y_2b/y_2c
+
+# case 1), variation of previous scenario with a subtree is moved into
+# a directory created after creating the parent snapshot
+mv $SCRATCH_MNT/w_a/w_c/w_d/w_2b/w_e $SCRATCH_MNT/w_a/w_c/w_d/w_2b/w_2e
+mkdir $SCRATCH_MNT/w_a/w_h
+mv $SCRATCH_MNT/w_a/w_c/w_d $SCRATCH_MNT/w_a/w_h/w_2d
+mv $SCRATCH_MNT/w_a/w_c $SCRATCH_MNT/w_a/w_h/w_2d/w_2b/w_2c
+
+mv $SCRATCH_MNT/xa/xc/xb2 $SCRATCH_MNT/xa/xe/xb3
+mkdir $SCRATCH_MNT/xa/xe/xb3/xf
+mkdir $SCRATCH_MNT/xa/xh
+mv $SCRATCH_MNT/xa/xc $SCRATCH_MNT/xa/xe/xb3/xf/xc2
+mv $SCRATCH_MNT/xa/xe $SCRATCH_MNT/xa/xh/xe2
+
+echo "hello" > $SCRATCH_MNT/%a/foo
+mkdir $SCRATCH_MNT/%a/%b/%d/%f
+mkdir $SCRATCH_MNT/%a/%b/%g
+mv $SCRATCH_MNT/%a/%c/%e $SCRATCH_MNT/%a/%b/%g/%e2
+mv $SCRATCH_MNT/%a/%c $SCRATCH_MNT/%a/%b/%d/%f/%c2
+mv $SCRATCH_MNT/%a/%b/%d/%f $SCRATCH_MNT/%a/%b/%g/%e2/%f2
+mv $SCRATCH_MNT/%a/foo $SCRATCH_MNT/%a/%b/%g/%e2/%f2
+
+# Filesystem now looks like:
+#
+# . (ino 256)
+# |-- a2/ (ino 257)
+# | |-- f2/ (ino 263)
+# | | |-- file6 (ino 261)
+# | | |-- b3/ (ino 258)
+# | | |-- d/ (ino 260)
+# | | | |-- file3 (ino 261)
+# | | | |-- file8 (ino 308)
+# | | |
+# | | |-- file2 (ino 262)
+# | | |-- file4 (ino 261)
+# | | |-- file9 (ino 309)
+# | | |-- file10 (ino 309)
+# | | |
+# | | |-- c3/ (ino 259)
+# | | |-- file7 (ino 264)
+# | | |-- file11 (ino 310)
+# | |
+# | |-- x1/ (ino 265)
+# | |-- Z/ (ino 267)
+# | |-- X33/ (ino 268)
+# | |-- x4/ (ino 269)
+# | |-- x5/ (ino 270)
+# | |-- X22/ (ino 266)
+# |
+# |-- _a/ (ino 271)
+# | |-- _o/ (ino 311)
+# | | |-- _FF/ (ino 276)
+# | | |-- _E2/ (ino 275)
+# | | | |-- _BB/ (ino 272)
+# | | | |-- dd/ (ino 274)
+# | | |
+# | | |-- G2/ (ino 277)
+# | |-- C2/ (ino 273)
+# |
+# |-- za/ (ino 278)
+# | |-- zb/ (ino 279)
+# | |-- zg/ (ino 284)
+# | |-- zh/ (ino 312)
+# | |-- zEE/ (ino 282)
+# | |-- zCC/ (ino 280)
+# | |-- zDD/ (ino 281)
+# | |-- zFF/ (ino 283)
+# |
+# |-- y_a/ (ino 285)
+# | |-- y_y/ (ino 292)
+# | |-- y_x/ (ino 291)
+# | |-- y_2d/ (ino 288)
+# | |-- y_2b/ (ino 286)
+# | | |-- y_2c/ (ino 287)
+# | | |-- y_2e/ (ino 289)
+# | |-- y_f/ (ino 290)
+# |
+# |-- w_a/ (ino 293)
+# | |-- w_h/ (ino 313)
+# | |-- w_2d/ (ino 296)
+# | |-- w_2b/ (ino 294)
+# | | |-- w_2c/ (ino 295)
+# | | |-- w_2e/ (ino 297)
+# | |-- w_f/ (ino 298)
+# |
+# |-- xa/ (ino 299)
+# | |-- xh/ (ino 315)
+# | |-- xe2 (ino 302)
+# | |-- xb3/ (ino 300)
+# | |-- xf/ (ino 314)
+# | |-- xc2/ (ino 301)
+# |
+# |-- %a/ (ino 303)
+# |-- %b/ (ino 304)
+# |-- %d/ (ino 306)
+# |-- %g/ (ino 318)
+# |-- %e2/ (ino 307)
+# |-- %f2 (ino 317)
+# |-- %c2/ (ino 305)
+# |-- foo (ino 316)
+
+_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap2
+
+run_check $FSSUM_PROG -A -f -w $tmp/1.fssum $SCRATCH_MNT/mysnap1
+run_check $FSSUM_PROG -A -f -w $tmp/2.fssum -x $SCRATCH_MNT/mysnap2/mysnap1 \
+ $SCRATCH_MNT/mysnap2
+
+_run_btrfs_util_prog send $SCRATCH_MNT/mysnap1 -f $tmp/1.snap
+
+_run_btrfs_util_prog send -p $SCRATCH_MNT/mysnap1 $SCRATCH_MNT/mysnap2 \
+ -f $tmp/2.snap
+
+_check_scratch_fs
+
+_scratch_unmount
+_scratch_mkfs >/dev/null 2>&1
+_scratch_mount
+
+_run_btrfs_util_prog receive $SCRATCH_MNT -f $tmp/1.snap
+run_check $FSSUM_PROG -r $tmp/1.fssum $SCRATCH_MNT/mysnap1
+
+_run_btrfs_util_prog receive $SCRATCH_MNT -f $tmp/2.snap
+run_check $FSSUM_PROG -r $tmp/2.fssum $SCRATCH_MNT/mysnap2
+
+_check_scratch_fs
+
+status=0
+exit
new file mode 100644
@@ -0,0 +1 @@
+QA output created by 045
@@ -47,3 +47,4 @@
042 auto quick
043 auto quick
044 auto quick
+045 auto quick