@@ -2163,6 +2163,24 @@ _require_scratch_dev_pool()
done
}
+# ensure devices in SCRATCH_DEV_POOL are of the same size
+# must be called after _require_scratch_dev_pool
+_require_scratch_dev_pool_equal_size()
+{
+ local _size
+ local _newsize
+ local _dev
+
+ # SCRATCH_DEV has been set to the first device in SCRATCH_DEV_POOL
+ _size=`_get_device_size $SCRATCH_DEV`
+ for _dev in $SCRATCH_DEV_POOL; do
+ _newsize=`_get_device_size $_dev`
+ if [ $_size -ne $_newsize ]; then
+ _notrun "This test requires devices in SCRATCH_DEV_POOL have the same size"
+ fi
+ done
+}
+
# We will check if the device is deletable
_require_deletable_scratch_dev_pool()
{
@@ -2634,6 +2652,61 @@ _btrfs_stress_remount_compress()
done
}
+# stress btrfs by replacing devices in a loop
+# Note that at least 3 devices are needed in SCRATCH_DEV_POOL and the last
+# device should be free(not used by btrfs)
+_btrfs_stress_replace()
+{
+ local btrfs_mnt=$1
+
+ # The device number in SCRATCH_DEV_POOL should be at least 3,
+ # one is SCRATCH_DEV, one is to be replaced, one is free device
+ # we won't replace SCRATCH_DEV, see below for reason
+ if [ "`echo $SCRATCH_DEV_POOL | wc -w`" -lt 3 ]; then
+ echo "_btrfs_stress_replace requires at least 3 devices in SCRATCH_DEV_POOL"
+ return
+ fi
+
+ # take the last device as the first free_dev
+ local free_dev="`echo $SCRATCH_DEV_POOL | $AWK_PROG '{print $NF}'`"
+
+ # free_dev should be really free
+ if $BTRFS_UTIL_PROG filesystem show $btrfs_mnt | grep -q "$free_dev"; then
+ echo "_btrfs_stress_replace: $free_dev is used by btrfs"
+ return
+ fi
+
+ # dev_pool is device list being currently used by btrfs (excluding SCRATCH_DEV)
+ # and can be replaced. We don't replace SCRATCH_DEV because it will be used in
+ # _scratch_mount and _check_scratch_fs etc.
+ local dev_pool=`echo $SCRATCH_DEV_POOL | sed -e "s# *$SCRATCH_DEV *##" \
+ -e "s# *$free_dev *##"`
+
+ # set the first device in dev_pool as the first src_dev to be replaced
+ local src_dev=`echo $dev_pool | $AWK_PROG '{print $1}'`
+
+ echo "dev_pool=$dev_pool"
+ echo "free_dev=$free_dev, src_dev=$src_dev"
+ while true; do
+ echo "Replacing $src_dev with $free_dev"
+ $BTRFS_UTIL_PROG replace start -fB $src_dev $free_dev $btrfs_mnt
+ if [ $? -ne 0 ]; then
+ # don't update src_dev and free_dev if replace failed
+ continue
+ fi
+ dev_pool="$dev_pool $free_dev"
+ dev_pool=`echo $dev_pool | sed -e "s# *$src_dev *##"`
+ free_dev=$src_dev
+ src_dev=`echo $dev_pool | $AWK_PROG '{print $1}'`
+ done
+}
+
+# return device size in kb
+_get_device_size()
+{
+ grep `_short_dev $1` /proc/partitions | awk '{print $3}'
+}
+
init_rc()
{
if [ "$iam" == new ]
new file mode 100755
@@ -0,0 +1,122 @@
+#! /bin/bash
+# FSQA Test No. btrfs/063
+#
+# Run btrfs balance and replace operations simultaneously with fsstress
+# running in background.
+#
+#-----------------------------------------------------------------------
+# Copyright (C) 2014 Red Hat Inc. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+# we check scratch dev after each loop
+_require_scratch_nocheck
+_require_scratch_dev_pool 5
+_require_scratch_dev_pool_equal_size
+_btrfs_get_profile_configs replace
+
+rm -f $seqres.full
+
+run_test()
+{
+ local mkfs_opts=$1
+ local saved_scratch_dev_pool=$SCRATCH_DEV_POOL
+
+ echo "Test $mkfs_opts" >>$seqres.full
+
+ # remove the last device from the SCRATCH_DEV_POOL list so
+ # _scratch_pool_mkfs won't use all devices in pool
+ local last_dev="`echo $SCRATCH_DEV_POOL | $AWK_PROG '{print $NF}'`"
+ SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | sed -e "s# *$last_dev *##"`
+ _scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
+ # make sure we created btrfs with desired options
+ if [ $? -ne 0 ]; then
+ echo "mkfs $mkfs_opts failed"
+ SCRATCH_DEV_POOL=$saved_scratch_dev_pool
+ return
+ fi
+ _scratch_mount >>$seqres.full 2>&1
+ SCRATCH_DEV_POOL=$saved_scratch_dev_pool
+
+ args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
+ echo "Run fsstress $args" >>$seqres.full
+ $FSSTRESS_PROG $args >/dev/null 2>&1 &
+ fsstress_pid=$!
+
+ echo -n "Start balance worker: " >>$seqres.full
+ _btrfs_stress_balance $SCRATCH_MNT >/dev/null 2>&1 &
+ balance_pid=$!
+ echo "$balance_pid" >>$seqres.full
+
+ echo -n "Start replace worker: " >>$seqres.full
+ _btrfs_stress_replace $SCRATCH_MNT >>$seqres.full 2>&1 &
+ replace_pid=$!
+ echo "$replace_pid" >>$seqres.full
+
+ echo "Wait for fsstress to exit and kill all background workers" >>$seqres.full
+ wait $fsstress_pid
+ kill $balance_pid $replace_pid
+ wait
+ # wait for the balance and replace operations to finish
+ while ps aux | grep "balance start" | grep -qv grep; do
+ sleep 1
+ done
+ while ps aux | grep "replace start" | grep -qv grep; do
+ sleep 1
+ done
+
+ echo "Scrub the filesystem" >>$seqres.full
+ $BTRFS_UTIL_PROG scrub start -B $SCRATCH_MNT >>$seqres.full 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Scrub find errors in \"$mkfs_opts\" test" | tee -a $seqres.full
+ fi
+
+ _scratch_unmount
+ # we called _require_scratch_nocheck instead of _require_scratch
+ # do check after test for each profile config
+ _check_scratch_fs
+}
+
+echo "Silence is golden"
+for t in "${_btrfs_profile_configs[@]}"; do
+ run_test "$t"
+done
+
+status=0
+exit
new file mode 100644
@@ -0,0 +1,2 @@
+QA output created by 063
+Silence is golden
@@ -65,3 +65,4 @@
060 auto balance scrub
061 auto balance defrag compress
062 auto balance remount compress
+063 auto balance replace
Run btrfs balance and replace operations simultaneously with fsstress running in background. Signed-off-by: Eryu Guan <eguan@redhat.com> --- common/rc | 73 +++++++++++++++++++++++++++++++ tests/btrfs/063 | 122 ++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/063.out | 2 + tests/btrfs/group | 1 + 4 files changed, 198 insertions(+) create mode 100755 tests/btrfs/063 create mode 100644 tests/btrfs/063.out