Message ID | 1430852599-22724-4-git-send-email-anand.jain@oracle.com (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
On Tue, May 5, 2015 at 8:03 PM, Anand Jain <anand.jain@oracle.com> wrote: > This test case tests if the device delete would work when > the source device has failed with EIO errors. > > EIO errors are achieved usign the DM device. > > Also this test needs the latest btrfs-progs and kernel patch Not patch, but patch set instead. I was looking for a patch with that title and didn't found any, only a cover letter with the subject: "[PATCH 0/8 v2] device delete by devid". > under title > [PATCH] device delete by devid > > When this patch is not found in the btrfs-progs, this test > will not run. However when the require patch is not found > in the kernel it will fail gracefully. What's the status of these patches (both kernel and btrfs-progs)? I've noticed they've been around since april and no feedback on the mailing list. > > Signed-off-by: Anand Jain <anand.jain@oracle.com> > --- > v1->v2: accepts Dave Chinner's review comments, thanks > > common/rc | 6 +++++ > tests/btrfs/088 | 71 +++++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/btrfs/088.out | 2 ++ > tests/btrfs/group | 1 + > 4 files changed, 80 insertions(+) > create mode 100755 tests/btrfs/088 > create mode 100644 tests/btrfs/088.out > > diff --git a/common/rc b/common/rc > index 447ab7f..aca7a62 100644 > --- a/common/rc > +++ b/common/rc > @@ -2685,6 +2685,12 @@ _require_test_fcntl_advisory_locks() > _notrun "Require fcntl advisory locks support" > } > > +_require_btrfs_dev_del_by_devid() > +{ > + $BTRFS_UTIL_PROG device delete --help | egrep devid > /dev/null 2>&1 > + [ $? -eq 0 ] || _notrun "$BTRFS_UTIL_PROG too old (must support 'btrfs device delete <devid> /<mnt>')" > +} > + > _get_total_inode() > { > if [ -z "$1" ]; then > diff --git a/tests/btrfs/088 b/tests/btrfs/088 > new file mode 100755 > index 0000000..87814ec > --- /dev/null > +++ b/tests/btrfs/088 > @@ -0,0 +1,71 @@ > +#! /bin/bash > +# FS QA Test No. btrfs/088 > +# > +# test device delete when the source device has EIO > +# > +# Copyright (c) 2015 Oracle. All Rights Reserved. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +# > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > + > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > + > +_cleanup() > +{ > + _cleanup_dmerror > + rm -f $tmp > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter > +. ./common/dmerror > + > +_supported_fs btrfs > +_supported_os Linux > +_need_to_be_root > +_require_scratch_dev_pool 3 > +_require_btrfs_dev_del_by_devid > +_require_dmerror > + > +rm -f $seqres.full > + > +dev1="`echo $SCRATCH_DEV_POOL | $AWK_PROG '{print $2}'`" > +dev2="`echo $SCRATCH_DEV_POOL | $AWK_PROG '{print $3}'`" > + > +_init_dmerror > +_scratch_mkfs_dmerror "-f -d raid1 -m raid1 $dev1 $dev2" > +_mount_dmerror > + > +#$BTRFS_UTIL_PROG filesystem show -m $SCRATCH_MNT | _filter_btrfs_filesystem_show > + > +error_devid=`$BTRFS_UTIL_PROG filesystem show -m $SCRATCH_MNT |\ > + egrep $DMERROR_DEV | $AWK_PROG '{print $2}'` Any reason to not run here fsstress like the test from patch 2? Doing the device delete with a non-empty fs is a lot more interesting and can help find bugs and regressions in the future. > + > +# now load the error into the DMERROR_DEV > +_load_dmerror_table > + > +_run_btrfs_util_prog device delete $error_devid $SCRATCH_MNT > + > +echo "Silence is golden" > +status=0; exit > diff --git a/tests/btrfs/088.out b/tests/btrfs/088.out > new file mode 100644 > index 0000000..c24480a > --- /dev/null > +++ b/tests/btrfs/088.out > @@ -0,0 +1,2 @@ > +QA output created by 088 > +Silence is golden > diff --git a/tests/btrfs/group b/tests/btrfs/group > index d66b4fc..d474c47 100644 > --- a/tests/btrfs/group > +++ b/tests/btrfs/group > @@ -90,3 +90,4 @@ > 085 auto quick metadata subvol > 086 auto quick clone > 087 auto quick replace > +088 auto quick replace > -- > 2.0.0.153.g79dcccc > > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Filipe, > Any reason to not run here fsstress like the test from patch 2? Doing > the device delete with a non-empty fs is a lot more interesting and > can help find bugs and regressions in the future. You are reviewing v2. fsstress was added in v4. >> Also this test needs the latest btrfs-progs and kernel patch > > Not patch, but patch set instead. I was looking for a patch with that > title and didn't found any, only a cover letter with the subject: > "[PATCH 0/8 v2] device delete by devid". > >> under title >> [PATCH] device delete by devid will update comments. >> When this patch is not found in the btrfs-progs, this test >> will not run. However when the require patch is not found >> in the kernel it will fail gracefully. > > What's the status of these patches (both kernel and btrfs-progs)? I've > noticed they've been around since april and no feedback on the mailing > list. Thanks, Anand -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/common/rc b/common/rc index 447ab7f..aca7a62 100644 --- a/common/rc +++ b/common/rc @@ -2685,6 +2685,12 @@ _require_test_fcntl_advisory_locks() _notrun "Require fcntl advisory locks support" } +_require_btrfs_dev_del_by_devid() +{ + $BTRFS_UTIL_PROG device delete --help | egrep devid > /dev/null 2>&1 + [ $? -eq 0 ] || _notrun "$BTRFS_UTIL_PROG too old (must support 'btrfs device delete <devid> /<mnt>')" +} + _get_total_inode() { if [ -z "$1" ]; then diff --git a/tests/btrfs/088 b/tests/btrfs/088 new file mode 100755 index 0000000..87814ec --- /dev/null +++ b/tests/btrfs/088 @@ -0,0 +1,71 @@ +#! /bin/bash +# FS QA Test No. btrfs/088 +# +# test device delete when the source device has EIO +# +# Copyright (c) 2015 Oracle. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ + +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + + +_cleanup() +{ + _cleanup_dmerror + rm -f $tmp +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/dmerror + +_supported_fs btrfs +_supported_os Linux +_need_to_be_root +_require_scratch_dev_pool 3 +_require_btrfs_dev_del_by_devid +_require_dmerror + +rm -f $seqres.full + +dev1="`echo $SCRATCH_DEV_POOL | $AWK_PROG '{print $2}'`" +dev2="`echo $SCRATCH_DEV_POOL | $AWK_PROG '{print $3}'`" + +_init_dmerror +_scratch_mkfs_dmerror "-f -d raid1 -m raid1 $dev1 $dev2" +_mount_dmerror + +#$BTRFS_UTIL_PROG filesystem show -m $SCRATCH_MNT | _filter_btrfs_filesystem_show + +error_devid=`$BTRFS_UTIL_PROG filesystem show -m $SCRATCH_MNT |\ + egrep $DMERROR_DEV | $AWK_PROG '{print $2}'` + +# now load the error into the DMERROR_DEV +_load_dmerror_table + +_run_btrfs_util_prog device delete $error_devid $SCRATCH_MNT + +echo "Silence is golden" +status=0; exit diff --git a/tests/btrfs/088.out b/tests/btrfs/088.out new file mode 100644 index 0000000..c24480a --- /dev/null +++ b/tests/btrfs/088.out @@ -0,0 +1,2 @@ +QA output created by 088 +Silence is golden diff --git a/tests/btrfs/group b/tests/btrfs/group index d66b4fc..d474c47 100644 --- a/tests/btrfs/group +++ b/tests/btrfs/group @@ -90,3 +90,4 @@ 085 auto quick metadata subvol 086 auto quick clone 087 auto quick replace +088 auto quick replace
This test case tests if the device delete would work when the source device has failed with EIO errors. EIO errors are achieved usign the DM device. Also this test needs the latest btrfs-progs and kernel patch under title [PATCH] device delete by devid When this patch is not found in the btrfs-progs, this test will not run. However when the require patch is not found in the kernel it will fail gracefully. Signed-off-by: Anand Jain <anand.jain@oracle.com> --- v1->v2: accepts Dave Chinner's review comments, thanks common/rc | 6 +++++ tests/btrfs/088 | 71 +++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/088.out | 2 ++ tests/btrfs/group | 1 + 4 files changed, 80 insertions(+) create mode 100755 tests/btrfs/088 create mode 100644 tests/btrfs/088.out