| Message ID | 1439549224-29784-2-git-send-email-anand.jain@oracle.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Fri, Aug 14, 2015 at 06:47:02PM +0800, Anand Jain wrote: > From: Anand Jain <Anand.Jain@oracle.com> > > Controlled EIO from the device is achieved using the dm device. > Helper functions are at common/dmerror. > > Broadly steps will include calling _init_dmerror(). > _init_dmerror() will use SCRATCH_DEV to create dm linear device and assign > DMERROR_DEV to /dev/mapper/error-test. > > When test script is ready to get EIO, the test cases can call > _load_dmerror_table() which then it will load the dm error. > so that reading DMERROR_DEV will cause EIO. After the test case is > complete, cleanup must be done by calling _cleanup_dmerror(). > > Signed-off-by: Anand Jain <anand.jain@oracle.com> > Reviewed-by: Filipe Manana <fdmanana@suse.com> > --- > v4->v5: No Change. keep up with the patch set > v3->v4: rebase on latest xfstests code > v2.1->v3: accepts Filipe Manana's review comments, thanks > v2->v2.1: fixed missed typo error fixup in the commit. > v1->v2: accepts Dave Chinner's review comments, thanks > common/dmerror | 69 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > common/rc | 9 ++++++++ > 2 files changed, 78 insertions(+) > create mode 100644 common/dmerror > > diff --git a/common/dmerror b/common/dmerror > new file mode 100644 > index 0000000..f895d90 > --- /dev/null > +++ b/common/dmerror > @@ -0,0 +1,69 @@ > +##/bin/bash > +# > +# Copyright (c) 2015 Oracle. All Rights Reserved. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +# > +# > +# common functions for setting up and tearing down a dmerror device > + > +_init_dmerror() > +{ > + $DMSETUP_PROG remove error-test > /dev/null 2>&1 > + > + local BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV` > + > + DMERROR_DEV='/dev/mapper/error-test' > + > + DMLINEAR_TABLE="0 $BLK_DEV_SIZE linear $SCRATCH_DEV 0" > + > + $DMSETUP_PROG create error-test --table "$DMLINEAR_TABLE" || \ > + _fatal "failed to create dm linear device" > + > + DMERROR_TABLE="0 $BLK_DEV_SIZE error $SCRATCH_DEV 0" > +} > + > +_scratch_mkfs_dmerror() > +{ > + $MKFS_BTRFS_PROG $* $DMERROR_DEV >> $seqres.full 2>&1 || \ > + _fatal "failed to create mkfs.btrfs $* $DMERROR_DEV" I didn't follow previous reviews, please correct me if I miss anything. Is dmerror only for btrfs testing? I saw $MKFS_BTRFS_PROG here. And do we need $MKFS_OPTIONS too? > +} > + > +_mount_dmerror() > +{ > + mount -t $FSTYP $MOUNT_OPTIONS $DMERROR_DEV $SCRATCH_MNT $MOUNT_PROG ? > +} > + > +_unmount_dmerror() > +{ > + $UMOUNT_PROGS $SCRATCH_MNT $UMOUNT_PROG, no S at the end. Thanks, Eryu > +} > + > +_cleanup_dmerror() > +{ > + $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1 > + $DMSETUP_PROG remove error-test > /dev/null 2>&1 > +} > + > +_load_dmerror_table() > +{ > + $DMSETUP_PROG suspend error-test > + [ $? -ne 0 ] && _fatal "failed to suspend error-test" > + > + $DMSETUP_PROG load error-test --table "$DMERROR_TABLE" > + [ $? -ne 0 ] && _fatal "failed to load error table error-test" > + > + $DMSETUP_PROG resume error-test > + [ $? -ne 0 ] && _fatal "failed to resume error-test" > +} > diff --git a/common/rc b/common/rc > index 70d2fa8..8d4da0e 100644 > --- a/common/rc > +++ b/common/rc > @@ -1337,6 +1337,15 @@ _require_sane_bdev_flush() > fi > } > > +# this test requires the device mapper error target > +# > +_require_dmerror() > +{ > + _require_command "$DMSETUP_PROG" dmsetup > + $DMSETUP_PROG targets | grep error >/dev/null 2>&1 > + [ $? -ne 0 ] && _notrun "This test requires dm error support" > +} > + > # this test requires the device mapper flakey target > # > _require_dm_flakey() > -- > 2.4.1 > > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/common/dmerror b/common/dmerror new file mode 100644 index 0000000..f895d90 --- /dev/null +++ b/common/dmerror @@ -0,0 +1,69 @@ +##/bin/bash +# +# Copyright (c) 2015 Oracle. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +# +# common functions for setting up and tearing down a dmerror device + +_init_dmerror() +{ + $DMSETUP_PROG remove error-test > /dev/null 2>&1 + + local BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV` + + DMERROR_DEV='/dev/mapper/error-test' + + DMLINEAR_TABLE="0 $BLK_DEV_SIZE linear $SCRATCH_DEV 0" + + $DMSETUP_PROG create error-test --table "$DMLINEAR_TABLE" || \ + _fatal "failed to create dm linear device" + + DMERROR_TABLE="0 $BLK_DEV_SIZE error $SCRATCH_DEV 0" +} + +_scratch_mkfs_dmerror() +{ + $MKFS_BTRFS_PROG $* $DMERROR_DEV >> $seqres.full 2>&1 || \ + _fatal "failed to create mkfs.btrfs $* $DMERROR_DEV" +} + +_mount_dmerror() +{ + mount -t $FSTYP $MOUNT_OPTIONS $DMERROR_DEV $SCRATCH_MNT +} + +_unmount_dmerror() +{ + $UMOUNT_PROGS $SCRATCH_MNT +} + +_cleanup_dmerror() +{ + $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1 + $DMSETUP_PROG remove error-test > /dev/null 2>&1 +} + +_load_dmerror_table() +{ + $DMSETUP_PROG suspend error-test + [ $? -ne 0 ] && _fatal "failed to suspend error-test" + + $DMSETUP_PROG load error-test --table "$DMERROR_TABLE" + [ $? -ne 0 ] && _fatal "failed to load error table error-test" + + $DMSETUP_PROG resume error-test + [ $? -ne 0 ] && _fatal "failed to resume error-test" +} diff --git a/common/rc b/common/rc index 70d2fa8..8d4da0e 100644 --- a/common/rc +++ b/common/rc @@ -1337,6 +1337,15 @@ _require_sane_bdev_flush() fi } +# this test requires the device mapper error target +# +_require_dmerror() +{ + _require_command "$DMSETUP_PROG" dmsetup + $DMSETUP_PROG targets | grep error >/dev/null 2>&1 + [ $? -ne 0 ] && _notrun "This test requires dm error support" +} + # this test requires the device mapper flakey target # _require_dm_flakey()