@@ -47,6 +47,14 @@ _extent_count()
$XFS_IO_PROG -c "fiemap" $1 | tail -n +2 | grep -v hole | wc -l| $AWK_PROG '{print $1}'
}
+_uniq_extent_count()
+{
+ file=$1
+ $XFS_IO_PROG -c "fiemap" $file >> $seqres.full 2>&1
+ $XFS_IO_PROG -c "fiemap" $file | tail -n +2 | grep -v hole |\
+ $AWK_PROG '{print $3}' | sort | uniq | wc -l
+}
+
_check_extent_count()
{
min=$1
new file mode 100755
@@ -0,0 +1,112 @@
+#! /bin/bash
+# FS QA Test 200
+#
+# Basic btrfs inband dedup test, including:
+# 1) Enable
+# 2) Uniq file extent number
+# 3) Re-enable
+# 4) Disable
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016 Fujitsu. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/defrag
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch
+_need_to_be_root
+_require_btrfs_subcommand dedup
+_require_btrfs_kernel_feature dedup
+_require_btrfs_mkfs_feature dedup
+
+# File size is twice the maximum file extent of btrfs
+# So even fallbacked to non-dedup, it will have at least 2 extents
+file_size=$(( 256 * 1024 * 1024 ))
+
+_scratch_mkfs "-O dedup" >> $seqres.full 2>&1
+_scratch_mount
+
+do_dedup_test()
+{
+ backend=$1
+ dedup_bs=$2
+ _run_btrfs_util_prog dedup enable -s $backend -b $dedup_bs $SCRATCH_MNT
+ $XFS_IO_PROG -f -c "pwrite -b $dedup_bs 0 $dedup_bs" \
+ $SCRATCH_MNT/initial_block | _filter_xfs_io
+
+ # sync to ensure dedup hash is added into dedup pool
+ sync
+ $XFS_IO_PROG -f -c "pwrite -b $dedup_bs 0 $file_size" \
+ $SCRATCH_MNT/real_file | _filter_xfs_io
+ # sync again to ensure data are all rewriten to disk
+ sync
+
+ # Test if real_file is de-duplicated
+ nr_uniq_extents=$(_uniq_extent_count $SCRATCH_MNT/real_file)
+ nr_total_extents=$(_extent_count $SCRATCH_MNT/real_file)
+
+ echo "uniq/total: $nr_uniq_extents/$nr_total_extents" >> $seqres.full
+ # Allow a small amount of dedup miss, as commit interval or
+ # memory pressure may break a dedup_bs block and cause
+ # smalll extent which won't go through dedup routine
+ if [ $nr_uniq_extents -ge $(( $nr_total_extents * 5 / 100 )) ]; then
+ echo "Too high dedup failure rate"
+ fi
+}
+
+# Test inmemory dedup first, use 64K dedup bs to keep compatibility
+# with 64K page size
+do_dedup_test inmemory 64K
+
+# Test ondisk backend, and re-enable function
+do_dedup_test ondisk 64K
+
+# Test 128K(default) dedup bs
+do_dedup_test inmemory 128K
+do_dedup_test ondisk 128K
+
+# Check dedup disable
+_run_btrfs_util_prog dedup disable $SCRATCH_MNT
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,17 @@
+QA output created by 200
+wrote 65536/65536 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 268435456/268435456 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 65536/65536 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 268435456/268435456 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 131072/131072 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 268435456/268435456 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 131072/131072 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 268435456/268435456 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -117,3 +117,4 @@
114 auto qgroup
115 auto qgroup
116 auto quick metadata
+200 auto dedup
Add basic test for btrfs in-band de-duplication, including: 1) Enable 2) Re-enable 3) On disk extents are refering to same bytenr 4) Disable Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> --- common/defrag | 8 ++++ tests/btrfs/200 | 112 ++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/200.out | 17 ++++++++ tests/btrfs/group | 1 + 4 files changed, 138 insertions(+) create mode 100755 tests/btrfs/200 create mode 100644 tests/btrfs/200.out