new file mode 100755
@@ -0,0 +1,137 @@
+#! /bin/bash
+# FS QA Test 142
+#
+# Regression test for btrfs DIO read's repair during read without checksum.
+#
+# Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
+# introduced this regression. It'd cause 'Segmentation fault' error.
+#
+# The upstream fix is
+# Btrfs: fix segment fault when doing dio read
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2017 Liu Bo. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch_dev_pool 2
+
+_require_btrfs_command inspect-internal dump-tree
+_require_command "$FILEFRAG_PROG" filefrag
+
+get_physical()
+{
+ # $1 is logical address
+ # print chunk tree and find devid 2 which is $SCRATCH_DEV
+ $BTRFS_UTIL_PROG inspect-internal dump-tree -t 3 $SCRATCH_DEV | \
+ grep $1 -A 6 | awk '($1 ~ /stripe/ && $3 ~ /devid/ && $4 ~ /1/) { print $6 }'
+}
+
+
+SYSFS_BDEV=`_sysfs_dev $SCRATCH_DEV`
+
+start_fail()
+{
+ echo 100 > $DEBUGFS_MNT/fail_make_request/probability
+ echo 2 > $DEBUGFS_MNT/fail_make_request/times
+ echo 0 > $DEBUGFS_MNT/fail_make_request/verbose
+ echo 1 > $SYSFS_BDEV/make-it-fail
+}
+
+stop_fail()
+{
+ echo 0 > $DEBUGFS_MNT/fail_make_request/probability
+ echo 0 > $DEBUGFS_MNT/fail_make_request/times
+ echo 0 > $SYSFS_BDEV/make-it-fail
+}
+
+_scratch_dev_pool_get 2
+# step 1, create a raid1 btrfs which contains one 128k file.
+echo "step 1......mkfs.btrfs" >>$seqres.full
+
+mkfs_opts="-d raid1 -b 1G"
+_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
+
+# -o nospace_cache makes sure data is written to the start position of the data
+# chunk
+_scratch_mount -o nospace_cache,nodatasum
+
+$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" | _filter_xfs_io
+
+# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first
+# one in $SCRATCH_DEV_POOL
+echo "step 2......corrupt file extent" >>$seqres.full
+
+${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar >> $seqres.full
+logical_in_btrfs=`${FILEFRAG_PROG} -v $SCRATCH_MNT/foobar | _filter_filefrag | cut -d '#' -f 1`
+physical_on_scratch=`get_physical ${logical_in_btrfs}`
+
+_scratch_unmount
+$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $physical_on_scratch 64K" $SCRATCH_DEV | _filter_xfs_io
+
+_scratch_mount -o nospace_cache,nodatasum
+
+# step 3, 128k dio read (this read can repair bad copy)
+echo "step 3......repair the bad copy" >>$seqres.full
+
+# since raid1 consists of two copies, and the following read may read the good
+# copy directly, so lets loop 10 times here and discard output that dio reads
+# give
+for i in `seq 1 10`; do
+ # start_fail only fails the following dio read so the repair is
+ # supposed to work.
+ start_fail
+ $XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null
+ stop_fail
+ _get_current_dmesg | grep -q -e "direct IO failed" && break
+done
+
+_scratch_unmount
+
+# check if the repair works
+$XFS_IO_PROG -c "pread -v -b 512 $physical_on_scratch 512" $SCRATCH_DEV | _filter_xfs_io
+
+_scratch_dev_pool_put
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,39 @@
+QA output created by 142
+wrote 131072/131072 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 65536/65536 bytes at offset 136708096
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+08260000: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260010: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260020: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260030: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260040: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260050: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260060: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260070: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260080: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260090: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+082600a0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+082600b0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+082600c0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+082600d0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+082600e0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+082600f0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260100: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260110: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260120: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260130: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260140: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260150: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260160: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260170: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260180: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+08260190: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+082601a0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+082601b0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+082601c0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+082601d0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+082601e0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+082601f0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+read 512/512 bytes at offset 136708096
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -143,3 +143,4 @@
139 auto qgroup
140 auto quick
141 auto quick
+142 auto quick
Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks") introduced this regression. It'd cause 'Segmentation fault' error. The upstream fix is Btrfs: fix segment fault when doing dio read Signed-off-by: Liu Bo <bo.li.liu@oracle.com> --- tests/btrfs/142 | 137 ++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/142.out | 39 +++++++++++++++ tests/btrfs/group | 1 + 3 files changed, 177 insertions(+) create mode 100755 tests/btrfs/142 create mode 100644 tests/btrfs/142.out