@@ -59,6 +59,20 @@ _extent_count()
$XFS_IO_PROG -c "fiemap" $1 | tail -n +2 | grep -v hole | wc -l| $AWK_PROG '{print $1}'
}
+# Get the number of unique file extents
+# Unique file extents means they have different ondisk bytenr
+# Some filesystem supports reflinkat() or in-band de-dup can create
+# a file whose all file extents points to the same ondisk bytenr
+# this can be used to test if such reflinkat() or in-band de-dup works
+_extent_count_uniq()
+{
+ local file=$1
+
+ $XFS_IO_PROG -c "fiemap" $file >> $seqres.full 2>&1
+ $XFS_IO_PROG -c "fiemap" $file | tail -n +2 | grep -v hole |\
+ $AWK_PROG '{print $3}' | sort | uniq | wc -l
+}
+
_check_extent_count()
{
min=$1
new file mode 100755
@@ -0,0 +1,110 @@
+#! /bin/bash
+# FS QA Test 200
+#
+# Basic btrfs inband dedupe test for inmemory backend
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2017 Fujitsu. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/defrag
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch
+_require_btrfs_command dedupe
+_require_btrfs_fs_feature dedupe
+
+# File size is twice the maximum file extent of btrfs
+# So even fallbacked to non-dedupe, it will have at least 2 extents
+file_size=256m
+
+_scratch_mkfs >> $seqres.full 2>&1
+_scratch_mount
+
+do_dedupe_test()
+{
+ dedupe_bs=$1
+
+ echo "Testing inmemory dedupe backend with block size $dedupe_bs"
+ _run_btrfs_util_prog dedupe enable -f -s inmemory -b $dedupe_bs \
+ $SCRATCH_MNT
+ # do sync write to ensure dedupe hash is added into dedupe pool
+ $XFS_IO_PROG -f -c "pwrite -b $dedupe_bs 0 $dedupe_bs" -c "fsync"\
+ $SCRATCH_MNT/initial_block | _filter_xfs_io
+
+ # do sync write to ensure we can get stable fiemap later
+ $XFS_IO_PROG -f -c "pwrite -b $dedupe_bs 0 $file_size" -c "fsync"\
+ $SCRATCH_MNT/real_file | _filter_xfs_io
+
+ # Test if real_file is de-duplicated
+ nr_uniq_extents=$(_extent_count_uniq $SCRATCH_MNT/real_file)
+ nr_total_extents=$(_extent_count $SCRATCH_MNT/real_file)
+ nr_deduped_extents=$(($nr_total_extents - $nr_uniq_extents))
+
+ echo "deduped/total: $nr_deduped_extents/$nr_total_extents" \
+ >> $seqres.full
+ # Allow a small amount of dedupe miss, as commit interval or
+ # memory pressure may break a dedupe_bs block and cause
+ # small extent which won't go through dedupe routine
+ _within_tolerance "number of deduped extents" $nr_deduped_extents \
+ $nr_total_extents 5% -v
+
+ # Also check the md5sum to ensure data is not corrupted
+ md5=$(_md5_checksum $SCRATCH_MNT/real_file)
+ echo "md5sum: $md5"
+}
+
+# Test inmemory dedupe first, use 64K dedupe bs to keep compatibility
+# with 64K page size
+do_dedupe_test 64K
+
+# Test 128K(default) dedupe bs
+do_dedupe_test 128K
+
+# Test 1M dedupe bs
+do_dedupe_test 1M
+
+# Check dedupe disable
+_run_btrfs_util_prog dedupe disable $SCRATCH_MNT
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,22 @@
+QA output created by 200
+Testing inmemory dedupe backend with block size 64K
+wrote 65536/65536 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 268435456/268435456 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+number of deduped extents is in range
+md5sum: a30e0f3f1b0884081de11d4357811c2e
+Testing inmemory dedupe backend with block size 128K
+wrote 131072/131072 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 268435456/268435456 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+number of deduped extents is in range
+md5sum: a30e0f3f1b0884081de11d4357811c2e
+Testing inmemory dedupe backend with block size 1M
+wrote 1048576/1048576 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 268435456/268435456 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+number of deduped extents is in range
+md5sum: a30e0f3f1b0884081de11d4357811c2e
@@ -141,3 +141,4 @@
136 auto convert
137 auto quick send
138 auto compress
+200 auto ib-dedupe
Add basic test for btrfs in-band de-duplication(inmemory backend), including: 1) Enable 3) Dedup rate 4) File correctness 5) Disable Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> --- common/defrag | 14 +++++++ tests/btrfs/200 | 110 ++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/200.out | 22 +++++++++++ tests/btrfs/group | 1 + 4 files changed, 147 insertions(+) create mode 100755 tests/btrfs/200 create mode 100644 tests/btrfs/200.out