@@ -271,7 +271,6 @@ static const char *const cmd_flag_name[] = {
#define RQF_NAME(name) [ilog2((__force u32)RQF_##name)] = #name
static const char *const rqf_name[] = {
RQF_NAME(SORTED),
- RQF_NAME(STARTED),
RQF_NAME(QUEUED),
RQF_NAME(SOFTBARRIER),
RQF_NAME(FLUSH_SEQ),
@@ -295,7 +294,6 @@ static const char *const rqf_name[] = {
#define RQAF_NAME(name) [REQ_ATOM_##name] = #name
static const char *const rqaf_name[] = {
RQAF_NAME(COMPLETE),
- RQAF_NAME(STARTED),
RQAF_NAME(POLL_SLEPT),
};
#undef RQAF_NAME
@@ -409,7 +407,7 @@ static void hctx_show_busy_rq(struct request *rq, void *data, bool reserved)
const struct show_busy_params *params = data;
if (blk_mq_map_queue(rq->q, rq->mq_ctx->cpu) == params->hctx &&
- test_bit(REQ_ATOM_STARTED, &rq->atomic_flags))
+ blk_mq_rq_state(rq) != MQ_RQ_IDLE)
__blk_mq_debugfs_rq_show(params->m,
list_entry_rq(&rq->queuelist));
}
@@ -483,7 +483,6 @@ void blk_mq_free_request(struct request *rq)
blk_put_rl(blk_rq_rl(rq));
blk_mq_rq_update_state(rq, MQ_RQ_IDLE);
- clear_bit(REQ_ATOM_STARTED, &rq->atomic_flags);
clear_bit(REQ_ATOM_POLL_SLEPT, &rq->atomic_flags);
if (rq->tag != -1)
blk_mq_put_tag(hctx, hctx->tags, ctx, rq->tag);
@@ -531,6 +530,7 @@ static void __blk_mq_complete_request(struct request *rq)
int cpu;
WARN_ON_ONCE(blk_mq_rq_state(rq) != MQ_RQ_IN_FLIGHT);
+ blk_mq_rq_update_state(rq, MQ_RQ_COMPLETE);
if (rq->internal_tag != -1)
blk_mq_sched_completed_request(rq);
@@ -621,7 +621,7 @@ EXPORT_SYMBOL(blk_mq_complete_request);
int blk_mq_request_started(struct request *rq)
{
- return test_bit(REQ_ATOM_STARTED, &rq->atomic_flags);
+ return blk_mq_rq_state(rq) != MQ_RQ_IDLE;
}
EXPORT_SYMBOL_GPL(blk_mq_request_started);
@@ -640,7 +640,6 @@ void blk_mq_start_request(struct request *rq)
}
WARN_ON_ONCE(blk_mq_rq_state(rq) != MQ_RQ_IDLE);
- WARN_ON_ONCE(test_bit(REQ_ATOM_STARTED, &rq->atomic_flags));
/*
* Mark @rq in-flight which also advances the generation number,
@@ -662,8 +661,6 @@ void blk_mq_start_request(struct request *rq)
write_seqcount_end(&rq->gstate_seq);
preempt_enable();
- set_bit(REQ_ATOM_STARTED, &rq->atomic_flags);
-
if (q->dma_drain_size && blk_rq_bytes(rq)) {
/*
* Make sure space for the drain appears. We know we can do
@@ -676,13 +673,9 @@ void blk_mq_start_request(struct request *rq)
EXPORT_SYMBOL(blk_mq_start_request);
/*
- * When we reach here because queue is busy, REQ_ATOM_COMPLETE
- * flag isn't set yet, so there may be race with timeout handler,
- * but given rq->deadline is just set in .queue_rq() under
- * this situation, the race won't be possible in reality because
- * rq->timeout should be set as big enough to cover the window
- * between blk_mq_start_request() called from .queue_rq() and
- * clearing REQ_ATOM_STARTED here.
+ * When we reach here because queue is busy, it's safe to change the state
+ * to IDLE without checking @rq->aborted_gstate because we should still be
+ * holding the RCU read lock and thus protected against timeout.
*/
static void __blk_mq_requeue_request(struct request *rq)
{
@@ -694,7 +687,7 @@ static void __blk_mq_requeue_request(struct request *rq)
wbt_requeue(q->rq_wb, &rq->issue_stat);
blk_mq_sched_requeue_request(rq);
- if (test_and_clear_bit(REQ_ATOM_STARTED, &rq->atomic_flags)) {
+ if (blk_mq_rq_state(rq) != MQ_RQ_IDLE) {
blk_mq_rq_update_state(rq, MQ_RQ_IDLE);
if (q->dma_drain_size && blk_rq_bytes(rq))
rq->nr_phys_segments--;
@@ -801,18 +794,6 @@ static void blk_mq_rq_timed_out(struct request *req, bool reserved)
const struct blk_mq_ops *ops = req->q->mq_ops;
enum blk_eh_timer_return ret = BLK_EH_RESET_TIMER;
- /*
- * We know that complete is set at this point. If STARTED isn't set
- * anymore, then the request isn't active and the "timeout" should
- * just be ignored. This can happen due to the bitflag ordering.
- * Timeout first checks if STARTED is set, and if it is, assumes
- * the request is active. But if we race with completion, then
- * both flags will get cleared. So check here again, and ignore
- * a timeout event with a request that isn't active.
- */
- if (!test_bit(REQ_ATOM_STARTED, &req->atomic_flags))
- return;
-
req->rq_flags |= RQF_MQ_TIMEOUT_EXPIRED;
if (ops->timeout)
@@ -848,8 +829,7 @@ static void blk_mq_check_expired(struct blk_mq_hw_ctx *hctx,
might_sleep();
- if ((rq->rq_flags & RQF_MQ_TIMEOUT_EXPIRED) ||
- !test_bit(REQ_ATOM_STARTED, &rq->atomic_flags))
+ if (rq->rq_flags & RQF_MQ_TIMEOUT_EXPIRED)
return;
/* read coherent snapshots of @rq->state_gen and @rq->deadline */
@@ -2971,8 +2951,7 @@ static bool blk_mq_poll_hybrid_sleep(struct request_queue *q,
hrtimer_init_sleeper(&hs, current);
do {
- if (test_bit(REQ_ATOM_STARTED, &rq->atomic_flags) &&
- blk_mq_rq_state(rq) != MQ_RQ_IN_FLIGHT)
+ if (blk_mq_rq_state(rq) == MQ_RQ_COMPLETE)
break;
set_current_state(TASK_UNINTERRUPTIBLE);
hrtimer_start_expires(&hs.timer, mode);
@@ -34,6 +34,7 @@ struct blk_mq_ctx {
enum mq_rq_state {
MQ_RQ_IDLE = 0,
MQ_RQ_IN_FLIGHT = 1,
+ MQ_RQ_COMPLETE = 2,
MQ_RQ_STATE_BITS = 2,
MQ_RQ_STATE_MASK = (1 << MQ_RQ_STATE_BITS) - 1,
@@ -124,7 +124,6 @@ void blk_account_io_done(struct request *req);
*/
enum rq_atomic_flags {
REQ_ATOM_COMPLETE = 0,
- REQ_ATOM_STARTED,
REQ_ATOM_POLL_SLEPT,
};
After the recent updates to use generation number and state based synchronization, we can easily replace REQ_ATOM_STARTED usages by adding an extra state to distinguish completed but not yet freed state. Add MQ_RQ_COMPLETE and replace REQ_ATOM_STARTED usages with blk_mq_rq_state() tests. REQ_ATOM_STARTED no longer has any users left and is removed. Signed-off-by: Tejun Heo <tj@kernel.org> --- block/blk-mq-debugfs.c | 4 +--- block/blk-mq.c | 37 ++++++++----------------------------- block/blk-mq.h | 1 + block/blk.h | 1 - 4 files changed, 10 insertions(+), 33 deletions(-)