| Message ID | 20241007-dcd-type2-upstream-v4-14-c261ee6eeded@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | DCD: Add support for Dynamic Capacity Devices (DCD) | expand |
On Mon, 07 Oct 2024 18:16:20 -0500 ira.weiny@intel.com wrote: > From: Navneet Singh <navneet.singh@intel.com> > > Endpoint decoder mode is used to represent the partition the decoder > points to such as ram or pmem. > > Expand the mode to allow a decoder to point to a specific DC partition > (Region). > > Signed-off-by: Navneet Singh <navneet.singh@intel.com> > Co-developed-by: Ira Weiny <ira.weiny@intel.com> > Signed-off-by: Ira Weiny <ira.weiny@intel.com> A few comments inline about ways that can make this a little tidier and less fragile. Jonathan > > --- > Changes: > [iweiny: prevent creation of region on shareable DC partitions] > [Fan: change mode range logic] > [Fan: use !resource_size()] > [djiang: use the static mode name string array in mode_store()] > [Jonathan: remove rc check from mode to region index] > [Jonathan: clarify decoder mode 'mixed'] > [djbw: drop cleanup patch and just follow the convention in cxl_dpa_set_mode()] > [fan: make dcd resource size check similar to other partitions] > [djbw, jonathan, fan: remove mode range check from dc_mode_to_region_index] > [iweiny: push sysfs versions to 6.12] > --- > Documentation/ABI/testing/sysfs-bus-cxl | 21 ++++++++++---------- > drivers/cxl/core/hdm.c | 17 ++++++++++++++++ > drivers/cxl/core/port.c | 10 +++++----- > drivers/cxl/cxl.h | 35 ++++++++++++++++++--------------- > 4 files changed, 52 insertions(+), 31 deletions(-) > > diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl > index b865eefdb74c..661dab99183f 100644 > --- a/Documentation/ABI/testing/sysfs-bus-cxl > +++ b/Documentation/ABI/testing/sysfs-bus-cxl > @@ -361,23 +361,24 @@ Description: > > > What: /sys/bus/cxl/devices/decoderX.Y/mode > -Date: May, 2022 > -KernelVersion: v6.0 > +Date: May, 2022, October 2024 > +KernelVersion: v6.0, v6.12 (dcY) > Contact: linux-cxl@vger.kernel.org > Description: > (RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it > translates from a host physical address range, to a device local > address range. Device-local address ranges are further split > - into a 'ram' (volatile memory) range and 'pmem' (persistent > - memory) range. The 'mode' attribute emits one of 'ram', 'pmem', > - 'mixed', or 'none'. The 'mixed' indication is for error cases > - when a decoder straddles the volatile/persistent partition > - boundary, and 'none' indicates the decoder is not actively > - decoding, or no DPA allocation policy has been set. > + into a 'ram' (volatile memory) range, 'pmem' (persistent > + memory) range, or Dynamic Capacity (DC) range. memory) range, and Dynamic Capacity (DC) ranges. (doesn't work with preceding text otherwise) > The 'mode' > + attribute emits one of 'ram', 'pmem', 'dcY', 'mixed', or > + 'none'. The 'mixed' indication is for error cases when a > + decoder straddles partition boundaries, and 'none' indicates > + the decoder is not actively decoding, or no DPA allocation > + policy has been set. > > 'mode' can be written, when the decoder is in the 'disabled' > - state, with either 'ram' or 'pmem' to set the boundaries for the > - next allocation. > + state, with 'ram', 'pmem', or 'dcY' to set the boundaries for > + the next allocation. > > > What: /sys/bus/cxl/devices/decoderX.Y/dpa_resource > diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c > index 8c7f941eaba1..b368babb55d9 100644 > --- a/drivers/cxl/core/hdm.c > +++ b/drivers/cxl/core/hdm.c > @@ -551,6 +551,7 @@ int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled, > switch (mode) { > case CXL_DECODER_RAM: > case CXL_DECODER_PMEM: > + case CXL_DECODER_DC0 ... CXL_DECODER_DC7: > break; > default: > dev_dbg(dev, "unsupported mode: %d\n", mode); > @@ -578,6 +579,22 @@ int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled, > goto out; > } > > + if (mode >= CXL_DECODER_DC0 && mode <= CXL_DECODER_DC7) { > + struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds); > + > + rc = dc_mode_to_region_index(mode); > + if (!resource_size(&cxlds->dc_res[rc])) { > + dev_dbg(dev, "no available dynamic capacity\n"); > + rc = -ENXIO; > + goto out; Probably worth adding a precursor patch that uses guard(rwsem_write) on the cxl_dpa_rwsem Allows for early returns simplifying existing code and this. > + } > + if (mds->dc_region[rc].shareable) { > + dev_err(dev, "DC region %d is shareable\n", rc); > + rc = -EINVAL; > + goto out; > + } > + } > + > cxled->mode = mode; > rc = 0; > out: > diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c > index 85b912c11f04..23b4f266a83a 100644 > --- a/drivers/cxl/core/port.c > +++ b/drivers/cxl/core/port.c > @@ -205,11 +205,11 @@ static ssize_t mode_store(struct device *dev, struct device_attribute *attr, > enum cxl_decoder_mode mode; > ssize_t rc; > > - if (sysfs_streq(buf, "pmem")) > - mode = CXL_DECODER_PMEM; > - else if (sysfs_streq(buf, "ram")) > - mode = CXL_DECODER_RAM; > - else > + for (mode = CXL_DECODER_RAM; mode < CXL_DECODER_MIXED; mode++) > + if (sysfs_streq(buf, cxl_decoder_mode_names[mode])) > + break; > + Loop over them all then do what you have here but explicit matches to reject the ones that can't be set. Add a MODE_COUNT to the end of the options. for (mode = 0; mode < CXL_DECODER_MODE_COUNT; mode++) if (sysfs_streq(buf, cxl_decoder_mode_names[mode])) break; if (mode == CXL_DECODER_MODE_COUNT) return -EINVAL; if (mode == CXL_DECODER_NONE) return -EINVAL; /* Not yet supported */ if (mode == CXL_DECODER_MIXED) return -EINVAL; ... > + if (mode >= CXL_DECODER_MIXED) > return -EINVAL; > > rc = cxl_dpa_set_mode(cxled, mode); > diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h > index 8b7099c38a40..cbaacbe0f36d 100644 > --- a/drivers/cxl/cxl.h > +++ b/drivers/cxl/cxl.h > @@ -365,6 +365,9 @@ struct cxl_decoder { > /* > * CXL_DECODER_DEAD prevents endpoints from being reattached to regions > * while cxld_unregister() is running > + * > + * NOTE: CXL_DECODER_RAM must be second and CXL_DECODER_MIXED must be last. This is a bit ugly. I'd change the logic a bit to avoid it. The list of things we don't support is short so just check for them. See above. > + * See mode_store() > */ > enum cxl_decoder_mode { > CXL_DECODER_NONE, > @@ -382,25 +385,25 @@ enum cxl_decoder_mode { > CXL_DECODER_DEAD, > }; > > +static const char * const cxl_decoder_mode_names[] = { > + [CXL_DECODER_NONE] = "none", > + [CXL_DECODER_RAM] = "ram", > + [CXL_DECODER_PMEM] = "pmem", > + [CXL_DECODER_DC0] = "dc0", > + [CXL_DECODER_DC1] = "dc1", > + [CXL_DECODER_DC2] = "dc2", > + [CXL_DECODER_DC3] = "dc3", > + [CXL_DECODER_DC4] = "dc4", > + [CXL_DECODER_DC5] = "dc5", > + [CXL_DECODER_DC6] = "dc6", > + [CXL_DECODER_DC7] = "dc7", > + [CXL_DECODER_MIXED] = "mixed", > +}; > + > static inline const char *cxl_decoder_mode_name(enum cxl_decoder_mode mode) > { > - static const char * const names[] = { > - [CXL_DECODER_NONE] = "none", > - [CXL_DECODER_RAM] = "ram", > - [CXL_DECODER_PMEM] = "pmem", > - [CXL_DECODER_DC0] = "dc0", > - [CXL_DECODER_DC1] = "dc1", > - [CXL_DECODER_DC2] = "dc2", > - [CXL_DECODER_DC3] = "dc3", > - [CXL_DECODER_DC4] = "dc4", > - [CXL_DECODER_DC5] = "dc5", > - [CXL_DECODER_DC6] = "dc6", > - [CXL_DECODER_DC7] = "dc7", > - [CXL_DECODER_MIXED] = "mixed", > - }; > - > if (mode >= CXL_DECODER_NONE && mode <= CXL_DECODER_MIXED) > - return names[mode]; > + return cxl_decoder_mode_names[mode]; > return "mixed"; > } > >
Jonathan Cameron wrote: > On Mon, 07 Oct 2024 18:16:20 -0500 > ira.weiny@intel.com wrote: > > > From: Navneet Singh <navneet.singh@intel.com> > > > > Endpoint decoder mode is used to represent the partition the decoder > > points to such as ram or pmem. > > > > Expand the mode to allow a decoder to point to a specific DC partition > > (Region). > > > > Signed-off-by: Navneet Singh <navneet.singh@intel.com> > > Co-developed-by: Ira Weiny <ira.weiny@intel.com> > > Signed-off-by: Ira Weiny <ira.weiny@intel.com> > > A few comments inline about ways that can make this a little tidier > and less fragile. All Done. Yea good idea on the enum. Ira [snip] > > (RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it > > translates from a host physical address range, to a device local > > address range. Device-local address ranges are further split > > - into a 'ram' (volatile memory) range and 'pmem' (persistent > > - memory) range. The 'mode' attribute emits one of 'ram', 'pmem', > > - 'mixed', or 'none'. The 'mixed' indication is for error cases > > - when a decoder straddles the volatile/persistent partition > > - boundary, and 'none' indicates the decoder is not actively > > - decoding, or no DPA allocation policy has been set. > > + into a 'ram' (volatile memory) range, 'pmem' (persistent > > + memory) range, or Dynamic Capacity (DC) range. > memory) range, and Dynamic Capacity (DC) ranges. > > (doesn't work with preceding text otherwise) > [snip] > > + if (mode >= CXL_DECODER_DC0 && mode <= CXL_DECODER_DC7) { > > + struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds); > > + > > + rc = dc_mode_to_region_index(mode); > > + if (!resource_size(&cxlds->dc_res[rc])) { > > + dev_dbg(dev, "no available dynamic capacity\n"); > > + rc = -ENXIO; > > + goto out; > Probably worth adding a precursor patch that uses guard(rwsem_write) on > the cxl_dpa_rwsem > Allows for early returns simplifying existing code and this. [snip] > > diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c > > index 85b912c11f04..23b4f266a83a 100644 > > --- a/drivers/cxl/core/port.c > > +++ b/drivers/cxl/core/port.c > > @@ -205,11 +205,11 @@ static ssize_t mode_store(struct device *dev, struct device_attribute *attr, > > enum cxl_decoder_mode mode; > > ssize_t rc; > > > > - if (sysfs_streq(buf, "pmem")) > > - mode = CXL_DECODER_PMEM; > > - else if (sysfs_streq(buf, "ram")) > > - mode = CXL_DECODER_RAM; > > - else > > + for (mode = CXL_DECODER_RAM; mode < CXL_DECODER_MIXED; mode++) > > + if (sysfs_streq(buf, cxl_decoder_mode_names[mode])) > > + break; > > + > Loop over them all then do what you have here but explicit matches > to reject the ones that can't be set. > Add a MODE_COUNT to the end of the options. > > for (mode = 0; mode < CXL_DECODER_MODE_COUNT; mode++) > if (sysfs_streq(buf, cxl_decoder_mode_names[mode])) > break; > > if (mode == CXL_DECODER_MODE_COUNT) > return -EINVAL; > > if (mode == CXL_DECODER_NONE) > return -EINVAL; > > /* Not yet supported */ > if (mode == CXL_DECODER_MIXED) > return -EINVAL; > ... > > > + if (mode >= CXL_DECODER_MIXED) > > return -EINVAL; > > > > rc = cxl_dpa_set_mode(cxled, mode); > > diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h > > index 8b7099c38a40..cbaacbe0f36d 100644 > > --- a/drivers/cxl/cxl.h > > +++ b/drivers/cxl/cxl.h > > @@ -365,6 +365,9 @@ struct cxl_decoder { > > /* > > * CXL_DECODER_DEAD prevents endpoints from being reattached to regions > > * while cxld_unregister() is running > > + * > > + * NOTE: CXL_DECODER_RAM must be second and CXL_DECODER_MIXED must be last. > This is a bit ugly. I'd change the logic a bit to avoid it. > The list of things we don't support is short so just check for them. > See above. > [snip]
diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index b865eefdb74c..661dab99183f 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -361,23 +361,24 @@ Description: What: /sys/bus/cxl/devices/decoderX.Y/mode -Date: May, 2022 -KernelVersion: v6.0 +Date: May, 2022, October 2024 +KernelVersion: v6.0, v6.12 (dcY) Contact: linux-cxl@vger.kernel.org Description: (RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it translates from a host physical address range, to a device local address range. Device-local address ranges are further split - into a 'ram' (volatile memory) range and 'pmem' (persistent - memory) range. The 'mode' attribute emits one of 'ram', 'pmem', - 'mixed', or 'none'. The 'mixed' indication is for error cases - when a decoder straddles the volatile/persistent partition - boundary, and 'none' indicates the decoder is not actively - decoding, or no DPA allocation policy has been set. + into a 'ram' (volatile memory) range, 'pmem' (persistent + memory) range, or Dynamic Capacity (DC) range. The 'mode' + attribute emits one of 'ram', 'pmem', 'dcY', 'mixed', or + 'none'. The 'mixed' indication is for error cases when a + decoder straddles partition boundaries, and 'none' indicates + the decoder is not actively decoding, or no DPA allocation + policy has been set. 'mode' can be written, when the decoder is in the 'disabled' - state, with either 'ram' or 'pmem' to set the boundaries for the - next allocation. + state, with 'ram', 'pmem', or 'dcY' to set the boundaries for + the next allocation. What: /sys/bus/cxl/devices/decoderX.Y/dpa_resource diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c index 8c7f941eaba1..b368babb55d9 100644 --- a/drivers/cxl/core/hdm.c +++ b/drivers/cxl/core/hdm.c @@ -551,6 +551,7 @@ int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled, switch (mode) { case CXL_DECODER_RAM: case CXL_DECODER_PMEM: + case CXL_DECODER_DC0 ... CXL_DECODER_DC7: break; default: dev_dbg(dev, "unsupported mode: %d\n", mode); @@ -578,6 +579,22 @@ int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled, goto out; } + if (mode >= CXL_DECODER_DC0 && mode <= CXL_DECODER_DC7) { + struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds); + + rc = dc_mode_to_region_index(mode); + if (!resource_size(&cxlds->dc_res[rc])) { + dev_dbg(dev, "no available dynamic capacity\n"); + rc = -ENXIO; + goto out; + } + if (mds->dc_region[rc].shareable) { + dev_err(dev, "DC region %d is shareable\n", rc); + rc = -EINVAL; + goto out; + } + } + cxled->mode = mode; rc = 0; out: diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c index 85b912c11f04..23b4f266a83a 100644 --- a/drivers/cxl/core/port.c +++ b/drivers/cxl/core/port.c @@ -205,11 +205,11 @@ static ssize_t mode_store(struct device *dev, struct device_attribute *attr, enum cxl_decoder_mode mode; ssize_t rc; - if (sysfs_streq(buf, "pmem")) - mode = CXL_DECODER_PMEM; - else if (sysfs_streq(buf, "ram")) - mode = CXL_DECODER_RAM; - else + for (mode = CXL_DECODER_RAM; mode < CXL_DECODER_MIXED; mode++) + if (sysfs_streq(buf, cxl_decoder_mode_names[mode])) + break; + + if (mode >= CXL_DECODER_MIXED) return -EINVAL; rc = cxl_dpa_set_mode(cxled, mode); diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h index 8b7099c38a40..cbaacbe0f36d 100644 --- a/drivers/cxl/cxl.h +++ b/drivers/cxl/cxl.h @@ -365,6 +365,9 @@ struct cxl_decoder { /* * CXL_DECODER_DEAD prevents endpoints from being reattached to regions * while cxld_unregister() is running + * + * NOTE: CXL_DECODER_RAM must be second and CXL_DECODER_MIXED must be last. + * See mode_store() */ enum cxl_decoder_mode { CXL_DECODER_NONE, @@ -382,25 +385,25 @@ enum cxl_decoder_mode { CXL_DECODER_DEAD, }; +static const char * const cxl_decoder_mode_names[] = { + [CXL_DECODER_NONE] = "none", + [CXL_DECODER_RAM] = "ram", + [CXL_DECODER_PMEM] = "pmem", + [CXL_DECODER_DC0] = "dc0", + [CXL_DECODER_DC1] = "dc1", + [CXL_DECODER_DC2] = "dc2", + [CXL_DECODER_DC3] = "dc3", + [CXL_DECODER_DC4] = "dc4", + [CXL_DECODER_DC5] = "dc5", + [CXL_DECODER_DC6] = "dc6", + [CXL_DECODER_DC7] = "dc7", + [CXL_DECODER_MIXED] = "mixed", +}; + static inline const char *cxl_decoder_mode_name(enum cxl_decoder_mode mode) { - static const char * const names[] = { - [CXL_DECODER_NONE] = "none", - [CXL_DECODER_RAM] = "ram", - [CXL_DECODER_PMEM] = "pmem", - [CXL_DECODER_DC0] = "dc0", - [CXL_DECODER_DC1] = "dc1", - [CXL_DECODER_DC2] = "dc2", - [CXL_DECODER_DC3] = "dc3", - [CXL_DECODER_DC4] = "dc4", - [CXL_DECODER_DC5] = "dc5", - [CXL_DECODER_DC6] = "dc6", - [CXL_DECODER_DC7] = "dc7", - [CXL_DECODER_MIXED] = "mixed", - }; - if (mode >= CXL_DECODER_NONE && mode <= CXL_DECODER_MIXED) - return names[mode]; + return cxl_decoder_mode_names[mode]; return "mixed"; }