[v2,00/11] Initial Fairphone 4 support

Message

Luca Weiss Oct. 7, 2021, 9:24 p.m. UTC

This series adds basic support for the recently announced Fairphone 4
smartphone, based on the Snapdragon 750G (sm7225).

This adds support for UART, power & volume buttons, screen based on
simple-framebuffer, regulators and USB.

v2 fixes some stylistic problems in dts and corrects the situation with
pm6350 regulator supplies.

Luca Weiss (11):
  clk: qcom: add select QCOM_GDSC for SM6350
  dt-bindings: regulator: qcom,rpmh: Add compatible for PM6350
  regulator: qcom-rpmh: Add PM6350 regulators
  dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for PM6350
  pinctrl: qcom: spmi-gpio: Add compatible for PM6350
  arm64: dts: qcom: Add PM6350 PMIC
  arm64: dts: qcom: sm6350: add debug uart
  dt-bindings: arm: cpus: Add Kryo 570 CPUs
  dt-bindings: arm: qcom: Document sm7225 and fairphone,fp4 board
  arm64: dts: qcom: Add SM7225 device tree
  arm64: dts: qcom: sm7225: Add device tree for Fairphone 4

 .../devicetree/bindings/arm/cpus.yaml         |   1 +
 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 .../bindings/pinctrl/qcom,pmic-gpio.yaml      |   2 +
 .../regulator/qcom,rpmh-regulator.yaml        |   2 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/pm6350.dtsi          |  54 +++
 arch/arm64/boot/dts/qcom/sm6350.dtsi          |  31 ++
 .../boot/dts/qcom/sm7225-fairphone-fp4.dts    | 320 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm7225.dtsi          |  16 +
 drivers/clk/qcom/Kconfig                      |   1 +
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c      |   1 +
 drivers/regulator/qcom-rpmh-regulator.c       |  32 ++
 12 files changed, 467 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm6350.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm7225.dtsi

Comments

Mark Brown Oct. 22, 2021, 12:52 a.m. UTC | #1

On Thu, 7 Oct 2021 23:24:27 +0200, Luca Weiss wrote:
> This series adds basic support for the recently announced Fairphone 4
> smartphone, based on the Snapdragon 750G (sm7225).
> 
> This adds support for UART, power & volume buttons, screen based on
> simple-framebuffer, regulators and USB.
> 
> v2 fixes some stylistic problems in dts and corrects the situation with
> pm6350 regulator supplies.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[02/11] dt-bindings: regulator: qcom,rpmh: Add compatible for PM6350
        commit: 12271ba94530e7476eff09e98a7de10c31f5d474
[03/11] regulator: qcom-rpmh: Add PM6350 regulators
        commit: 0adafd62505ccb4787d4918fd0b4ca126b754453

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark