[RESEND,v5,0/8] clk/resets: baikal-t1: Add DDR/PCIe resets and xGMAC/SATA fixes

Message

Serge Semin June 24, 2022, 2:18 p.m. UTC

Folks! It has been over four months since the first series submission for
review. Please merge it in.

Short summary regarding this patchset. The series starts from fixing a
wrong semantic of the device managed optional exclusive bulk reset control
getter. Then we suggest a fix of the clocks glitching cause by the Renesas
5P49V6901 chip in some circumstances. Afterwards a few more modifications
are introduced to finally finish the Baikal-T1 CCU unit support up and
prepare the code before adding the Baikal-T1 PCIe/xGMAC support. First of
all it turned out I specified wrong DW xGMAC PTP reference clock divider
in my initial patches. It must be 8, not 10. Secondly I was wrong to add a
joint xGMAC Ref and PTP clock instead of having them separately defined.
The SoC manual describes these clocks as separate fixed clock wrappers.
Finally in order to close the SoC clock/reset support up we need to add
the DDR and PCIe interfaces reset controls support. It's done in two
steps. First I've moved the reset-controls-related code into a dedicated
module. Then the DDR/PCIe reset-control functionality is added. As the
series finalization we've decided to convert the Baikal-T1 clock/reset
source drivers to mainly being the platform device driver and
pre-initialize the basic clocks only at the early kernel boot stages.

Link: https://lore.kernel.org/linux-pci/[e-mail]/
Changelog v2:
- Resubmit the series with adding @Philipp to the list of the recipients.

Link: https://lore.kernel.org/linux-pci/[e-mail]/
Changelog v3:
- No comments. Just resend the series.
- Rebased from v5.17 onto v5.18-rc3.

Link: https://lore.kernel.org/linux-clk/[e-mail]/
Changelog v4:
- Completely split the CCU Dividers and Resets functionality up. (@Stephen)
- Add a new fixes patch: "clk: baikal-t1: Actually enable SATA internal
  ref clock".
- Add a new fixes patch: "reset: Fix devm bulk optional exclusive control
  getter".
- Add a new fixes patch: "clk: vc5: Fix 5P49V6901 outputs disabling when
  enabling FOD".
- Add a new feagure patch: "clk: baikal-t1: Convert to platform device
  driver".
- Change the internal clock ID to the XGMAC-referred name.
- Rebase onto the kernel v5.18.

Link: https://lore.kernel.org/lkml/[e-mail]/
Changelog v5:
- Just resend.
- Rebase onto the kernel v5.19-rcX.

Signed-off-by: Serge Semin <[e-mail]>
Cc: Alexey Malahov <[e-mail]>
Cc: Pavel Parkhomenko <[e-mail]>
Cc: Thomas Bogendoerfer <[e-mail]>
Cc: [e-mail]
Cc: [e-mail]
Cc: [e-mail]

Serge Semin (8):
  reset: Fix devm bulk optional exclusive control getter
  clk: vc5: Fix 5P49V6901 outputs disabling when enabling FOD
  clk: baikal-t1: Fix invalid xGMAC PTP clock divider
  clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parent
  clk: baikal-t1: Add SATA internal ref clock buffer
  clk: baikal-t1: Move reset-controls code into a dedicated module
  clk: baikal-t1: Add DDR/PCIe directly controlled resets support
  clk: baikal-t1: Convert to platform device driver

 drivers/clk/baikal-t1/Kconfig       |  12 +-
 drivers/clk/baikal-t1/Makefile      |   1 +
 drivers/clk/baikal-t1/ccu-div.c     |  84 +++++++--
 drivers/clk/baikal-t1/ccu-div.h     |  17 +-
 drivers/clk/baikal-t1/ccu-pll.h     |   8 +
 drivers/clk/baikal-t1/ccu-rst.c     |  99 ++++++++++
 drivers/clk/baikal-t1/ccu-rst.h     |  79 ++++++++
 drivers/clk/baikal-t1/clk-ccu-div.c | 272 +++++++++++++++++-----------
 drivers/clk/baikal-t1/clk-ccu-pll.c | 128 ++++++++++---
 drivers/clk/baikal-t1/clk-ccu-rst.c | 257 ++++++++++++++++++++++++++
 drivers/clk/clk-versaclock5.c       |   2 +-
 include/dt-bindings/reset/bt1-ccu.h |   9 +
 include/linux/reset.h               |   2 +-
 13 files changed, 814 insertions(+), 156 deletions(-)
 create mode 100644 drivers/clk/baikal-t1/ccu-rst.c
 create mode 100644 drivers/clk/baikal-t1/ccu-rst.h
 create mode 100644 drivers/clk/baikal-t1/clk-ccu-rst.c