| Message ID | 20230220131307.269100-1-biju.das.jz@bp.renesas.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add Versa3 clock generator support | expand |
+ Rob , Krzysztof Kozlowski > -----Original Message----- > From: Biju Das <biju.das.jz@bp.renesas.com> > Sent: Monday, February 20, 2023 1:13 PM > To: Michael Turquette <mturquette@baylibre.com>; Stephen Boyd > <sboyd@kernel.org> > Cc: Biju Das <biju.das.jz@bp.renesas.com>; linux-clk@vger.kernel.org; Geert > Uytterhoeven <geert+renesas@glider.be>; Kuninori Morimoto > <kuninori.morimoto.gx@renesas.com>; Prabhakar Mahadev Lad > <prabhakar.mahadev-lad.rj@bp.renesas.com>; Fabrizio Castro > <fabrizio.castro.jz@renesas.com>; Mark Brown <broonie@kernel.org>; Takashi > Iwai <tiwai@suse.de>; alsa-devel@alsa-project.org; linux-renesas- > soc@vger.kernel.org > Subject: [PATCH RFC 0/3] Add Versa3 clock generator support > > The 5P35023 is a VersaClock programmable clock generator and it provides 6 > clk outputs {diff2, diff1, se3, se2, se1 and refin}. > > It has an internal OTP memory allows the user to store the configuration in > the device. After power up, the user can change the device register settings > through the I2C interface when I2C mode is selected. > > This driver is for overriding OTP default values during boot based on a full > register map from DT, and also minimal support to change the parent of a > output clock. > > The motivation for developing this driver is for supporting 48KHz > playback/record with audio codec on RZ/G2L SMARC EVK. > > On RZ/G2L SMARC EVK, By default audio mclk is connected to > 11.2896 MHz clk which is multiple of 44.1KHz. > > Please see the below default OTP configuration of Dividers connected to > output clocks. > > DIV3 12.2880 MHz DIFF2--> Audio clk2 > DIV5 11.2896 MHz SE1 --> Audio clk1 > DIV5 11.2896 MHz SE2 --> Audio mck > DIV4 12 MHz SE3 --> This clk Not used > DIV1 25 MHz DIFF1-->Ethernet clk > Ref1-> 24MHz > > With this setup, we won't be able to do 48KHz playback/record on audio > codec, as mck is always connected to 11.2896MHz clk. > > But by programming the i2c, we can make use of DIV4 to generate 12.2880 MHz > and make that as parent of SE2 and there by supporting 48KHz > playback/record. > > A block diagram with modification can be find here[1] > [1] https://paste.pics/a253ce7cdc8720c3b5eb6953b97b25ff > > DIV3 12.2880 MHz DIFF2--> Audio clk2 > DIV5 11.2896 MHz SE1 --> Audio clk1 > DIV5 11.2896 MHz | SE2 --> Audio mck > DIV4 12.2880 MHz | > DIV2 12 MHz SE3 --> This clk Not used > DIV1 25 MHz DIFF1--> Ethernet clk > Ref1-> 24MHz > > The driver can read a full register map from the DT, and will use that > register map to initialize the clk generator when the system boots. > and later, based on sampling rate, it switches the parent of SE2 and support > both 44.1 and 48 KHz playback/record at run time. > > 48KHz playback > 1f: f6 --> setting Div4 as clock source for se2 Read at address 0x10049C00 > : 0x300B4022 --> Setting Audio clk2 in SSI > pfd2 1 1 0 24000000 > pll2 1 1 0 491519897 > div4_mux 1 1 0 491519897 > div4 1 1 0 12287998 > se2_mux 1 1 0 12287998 > se2 1 1 0 12287998 > > 44.1KHz playback > 1f: b6 --> setting Div5 as clock source for se2 Read at address 0x10049C00: > 0x700B4022--> Setting Audio clk1 in SSI > pfd3_mux 1 1 0 24000000 > pfd3 1 1 0 960000 > pll3 1 1 0 564480000 > div5 1 1 0 11289600 > se2_mux 1 1 0 11289600 > se2 1 1 0 11289600 > > Please provide your valuable comment for this patch series. > > Biju Das (3): > dt-bindings: clock: Add Renesas versa3 clock generator bindings > drivers: clk: Add support for versa3 clock driver > arm64: dts: renesas: rzg2l-smarc: Use versa3 clk for audio mclk > > .../bindings/clock/renesas,versaclock3.yaml | 135 ++ > .../boot/dts/renesas/rz-smarc-common.dtsi | 7 - > arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | 35 + > drivers/clk/Kconfig | 9 + > drivers/clk/Makefile | 1 + > drivers/clk/clk-versaclock3.c | 1134 +++++++++++++++++ > 6 files changed, 1314 insertions(+), 7 deletions(-) create mode 100644 > Documentation/devicetree/bindings/clock/renesas,versaclock3.yaml > create mode 100644 drivers/clk/clk-versaclock3.c > > -- > 2.25.1
The 5P35023 is a VersaClock programmable clock generator and it provides 6 clk outputs {diff2, diff1, se3, se2, se1 and refin}. It has an internal OTP memory allows the user to store the configuration in the device. After power up, the user can change the device register settings through the I2C interface when I2C mode is selected. This driver is for overriding OTP default values during boot based on a full register map from DT, and also minimal support to change the parent of a output clock. The motivation for developing this driver is for supporting 48KHz playback/record with audio codec on RZ/G2L SMARC EVK. On RZ/G2L SMARC EVK, By default audio mclk is connected to 11.2896 MHz clk which is multiple of 44.1KHz. Please see the below default OTP configuration of Dividers connected to output clocks. DIV3 12.2880 MHz DIFF2--> Audio clk2 DIV5 11.2896 MHz SE1 --> Audio clk1 DIV5 11.2896 MHz SE2 --> Audio mck DIV4 12 MHz SE3 --> This clk Not used DIV1 25 MHz DIFF1-->Ethernet clk Ref1-> 24MHz With this setup, we won't be able to do 48KHz playback/record on audio codec, as mck is always connected to 11.2896MHz clk. But by programming the i2c, we can make use of DIV4 to generate 12.2880 MHz and make that as parent of SE2 and there by supporting 48KHz playback/record. A block diagram with modification can be find here[1] [1]https://paste.pics/a253ce7cdc8720c3b5eb6953b97b25ff DIV3 12.2880 MHz DIFF2--> Audio clk2 DIV5 11.2896 MHz SE1 --> Audio clk1 DIV5 11.2896 MHz | SE2 --> Audio mck DIV4 12.2880 MHz | DIV2 12 MHz SE3 --> This clk Not used DIV1 25 MHz DIFF1--> Ethernet clk Ref1-> 24MHz The driver can read a full register map from the DT, and will use that register map to initialize the clk generator when the system boots. and later, based on sampling rate, it switches the parent of SE2 and support both 44.1 and 48 KHz playback/record at run time. 48KHz playback 1f: f6 --> setting Div4 as clock source for se2 Read at address 0x10049C00 : 0x300B4022 --> Setting Audio clk2 in SSI pfd2 1 1 0 24000000 pll2 1 1 0 491519897 div4_mux 1 1 0 491519897 div4 1 1 0 12287998 se2_mux 1 1 0 12287998 se2 1 1 0 12287998 44.1KHz playback 1f: b6 --> setting Div5 as clock source for se2 Read at address 0x10049C00: 0x700B4022--> Setting Audio clk1 in SSI pfd3_mux 1 1 0 24000000 pfd3 1 1 0 960000 pll3 1 1 0 564480000 div5 1 1 0 11289600 se2_mux 1 1 0 11289600 se2 1 1 0 11289600 Please provide your valuable comment for this patch series. Biju Das (3): dt-bindings: clock: Add Renesas versa3 clock generator bindings drivers: clk: Add support for versa3 clock driver arm64: dts: renesas: rzg2l-smarc: Use versa3 clk for audio mclk .../bindings/clock/renesas,versaclock3.yaml | 135 ++ .../boot/dts/renesas/rz-smarc-common.dtsi | 7 - arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | 35 + drivers/clk/Kconfig | 9 + drivers/clk/Makefile | 1 + drivers/clk/clk-versaclock3.c | 1134 +++++++++++++++++ 6 files changed, 1314 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/renesas,versaclock3.yaml create mode 100644 drivers/clk/clk-versaclock3.c