diff mbox

[v2,21/22] ARM: dts: exynos: Add USB to Exynos5410

Message ID 1462734367-5619-22-git-send-email-krzk@kernel.org (mailing list archive)
State Not Applicable
Headers show

Commit Message

Krzysztof Kozlowski May 8, 2016, 7:06 p.m. UTC 
Move USB 3.0 DWC and 2.0 EHCI/OHCI nodes from exynos5420.dtsi to
exynos54xx.dtsi common for entire family. For Exynos542x/5800 this
should not have functional impact but for Exynos5410 this effectively
adds USB support.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

TODO: lack of regulator causes errors:
	usb usb4-port1: over-current condition
?
---
 arch/arm/boot/dts/exynos5410.dtsi |  39 ++++++++++++
 arch/arm/boot/dts/exynos5420.dtsi | 131 ++++++++++++--------------------------
 arch/arm/boot/dts/exynos54xx.dtsi |  74 +++++++++++++++++++++
 3 files changed, 152 insertions(+), 92 deletions(-)

Comments

Javier Martinez Canillas May 9, 2016, 9:55 p.m. UTC | #1 
Hello Krzysztof,

On 05/08/2016 03:06 PM, Krzysztof Kozlowski wrote:
> Move USB 3.0 DWC and 2.0 EHCI/OHCI nodes from exynos5420.dtsi to
> exynos54xx.dtsi common for entire family. For Exynos542x/5800 this
> should not have functional impact but for Exynos5410 this effectively
> adds USB support.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> 

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 850343d3c2af..dd4d6d752865 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -185,4 +185,43 @@ 
 		  3 0 0x07000000 0x20000>;
 };
 
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
 #include "exynos5410-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 750571f838f2..ebf1dbec5070 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -829,98 +829,6 @@ 
 			clock-names = "secss";
 		};
 
-		usbdrd3_0: usb3-0 {
-			compatible = "samsung,exynos5250-dwusb3";
-			clocks = <&clock CLK_USBD300>;
-			clock-names = "usbdrd30";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbdrd_dwc3_0: dwc3@12000000 {
-				compatible = "snps,dwc3";
-				reg = <0x12000000 0x10000>;
-				interrupts = <0 72 0>;
-				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usbdrd_phy0: phy@12100000 {
-			compatible = "samsung,exynos5420-usbdrd-phy";
-			reg = <0x12100000 0x100>;
-			clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
-			clock-names = "phy", "ref";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
-		usbdrd3_1: usb3-1 {
-			compatible = "samsung,exynos5250-dwusb3";
-			clocks = <&clock CLK_USBD301>;
-			clock-names = "usbdrd30";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbdrd_dwc3_1: dwc3@12400000 {
-				compatible = "snps,dwc3";
-				reg = <0x12400000 0x10000>;
-				interrupts = <0 73 0>;
-				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usbdrd_phy1: phy@12500000 {
-			compatible = "samsung,exynos5420-usbdrd-phy";
-			reg = <0x12500000 0x100>;
-			clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
-			clock-names = "phy", "ref";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
-		usbhost2: usb@12110000 {
-			compatible = "samsung,exynos4210-ehci";
-			reg = <0x12110000 0x100>;
-			interrupts = <0 71 0>;
-
-			clocks = <&clock CLK_USBH20>;
-			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&usb2_phy 1>;
-			};
-		};
-
-		usbhost1: usb@12120000 {
-			compatible = "samsung,exynos4210-ohci";
-			reg = <0x12120000 0x100>;
-			interrupts = <0 71 0>;
-
-			clocks = <&clock CLK_USBH20>;
-			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&usb2_phy 1>;
-			};
-		};
-
-		usb2_phy: phy@12130000 {
-			compatible = "samsung,exynos5250-usb2-phy";
-			reg = <0x12130000 0x100>;
-			clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
-			clock-names = "phy", "ref";
-			#phy-cells = <1>;
-			samsung,sysreg-phandle = <&sysreg_system_controller>;
-			samsung,pmureg-phandle = <&pmu_system_controller>;
-		};
-
 		sysmmu_g2dr: sysmmu@0x10A60000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x10A60000 0x1000>;
@@ -1184,4 +1092,43 @@ 
 	clock-names = "uart", "clk_uart_baud0";
 };
 
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
 #include "exynos5420-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 9ce625bd79c1..0f3b8735849e 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -64,5 +64,79 @@ 
 						<11 &gic 0 131 0>;
 			};
 		};
+
+		usbdrd3_0: usb3-0 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_0: dwc3@12000000 {
+				compatible = "snps,dwc3";
+				reg = <0x12000000 0x10000>;
+				interrupts = <0 72 0>;
+				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd_phy0: phy@12100000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12100000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbdrd3_1: usb3-1 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_1: dwc3@12400000 {
+				compatible = "snps,dwc3";
+				reg = <0x12400000 0x10000>;
+				interrupts = <0 73 0>;
+				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd_phy1: phy@12500000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12500000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbhost2: usb@12110000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12110000 0x100>;
+			interrupts = <0 71 0>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy 1>;
+			};
+		};
+
+		usbhost1: usb@12120000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12120000 0x100>;
+			interrupts = <0 71 0>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy 1>;
+			};
+		};
+
+		usb2_phy: phy@12130000 {
+			compatible = "samsung,exynos5250-usb2-phy";
+			reg = <0x12130000 0x100>;
+			#phy-cells = <1>;
+		};
 	};
 };