diff mbox

[v3,24/27] clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks

Message ID 1462910970-1812-25-git-send-email-krzk@kernel.org (mailing list archive)
State Not Applicable
Headers show

Commit Message

Krzysztof Kozlowski May 10, 2016, 8:09 p.m. UTC 
Add clocks for I2C, USI (HSI2C) and RTC to the Exynos5410 clock driver.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/clk/samsung/clk-exynos5410.c | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Javier Martinez Canillas May 11, 2016, 12:32 p.m. UTC | #1 
Hello Krzysztof,

On 05/10/2016 04:09 PM, Krzysztof Kozlowski wrote:
> Add clocks for I2C, USI (HSI2C) and RTC to the Exynos5410 clock driver.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
diff mbox

Patch

diff --git a/drivers/clk/samsung/clk-exynos5410.c b/drivers/clk/samsung/clk-exynos5410.c
index 40775f678f02..8dd0d8f6703e 100644
--- a/drivers/clk/samsung/clk-exynos5410.c
+++ b/drivers/clk/samsung/clk-exynos5410.c
@@ -165,6 +165,7 @@  static struct samsung_div_clock exynos5410_div_clks[] __initdata = {
 
 static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
 	GATE(CLK_MCT, "mct", "aclk66", GATE_IP_PERIS, 18, 0, 0),
+	GATE(CLK_RTC, "rtc", "aclk66", GATE_IP_PERIS, 20, 0, 0),
 
 	GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc_pre0",
 			SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
@@ -193,6 +194,14 @@  static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
 	GATE(CLK_UART1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0),
 	GATE(CLK_UART2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0),
 	GATE(CLK_UART3, "uart3", "aclk66", GATE_IP_PERIC, 3, 0, 0),
+	GATE(CLK_I2C0, "i2c0", "aclk66", GATE_IP_PERIC, 6, 0, 0),
+	GATE(CLK_I2C1, "i2c1", "aclk66", GATE_IP_PERIC, 7, 0, 0),
+	GATE(CLK_I2C2, "i2c2", "aclk66", GATE_IP_PERIC, 8, 0, 0),
+	GATE(CLK_I2C3, "i2c3", "aclk66", GATE_IP_PERIC, 9, 0, 0),
+	GATE(CLK_USI0, "usi0", "aclk66", GATE_IP_PERIC, 10, 0, 0),
+	GATE(CLK_USI1, "usi1", "aclk66", GATE_IP_PERIC, 11, 0, 0),
+	GATE(CLK_USI2, "usi2", "aclk66", GATE_IP_PERIC, 12, 0, 0),
+	GATE(CLK_USI3, "usi3", "aclk66", GATE_IP_PERIC, 13, 0, 0),
 	GATE(CLK_PWM, "pwm", "aclk66", GATE_IP_PERIC, 24, 0, 0),
 
 	GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",