@@ -167,36 +167,6 @@ meson_clk_register_fixed_factor(const struct clk_conf *clk_conf,
return clk;
}
-static struct clk * __init
-meson_clk_register_fixed_rate(const struct clk_conf *clk_conf,
- void __iomem *clk_base)
-{
- struct clk *clk;
- const struct fixed_rate_conf *fixed_rate_conf;
- const struct parm *r;
- unsigned long rate;
- u32 reg;
-
- fixed_rate_conf = &clk_conf->conf.fixed_rate;
- rate = fixed_rate_conf->rate;
-
- if (!rate) {
- r = &fixed_rate_conf->rate_parm;
- reg = readl(clk_base + clk_conf->reg_off + r->reg_off);
- rate = PARM_GET(r->width, r->shift, reg);
- }
-
- rate *= 1000000;
-
- clk = clk_register_fixed_rate(NULL,
- clk_conf->clk_name,
- clk_conf->num_parents
- ? clk_conf->clks_parent[0] : NULL,
- clk_conf->flags, rate);
-
- return clk;
-}
-
void __init meson_clk_register_clks(const struct clk_conf *clk_confs,
unsigned int nr_confs,
void __iomem *clk_base)
@@ -208,10 +178,6 @@ void __init meson_clk_register_clks(const struct clk_conf *clk_confs,
const struct clk_conf *clk_conf = &clk_confs[i];
switch (clk_conf->clk_type) {
- case CLK_FIXED_RATE:
- clk = meson_clk_register_fixed_rate(clk_conf,
- clk_base);
- break;
case CLK_FIXED_FACTOR:
clk = meson_clk_register_fixed_factor(clk_conf,
clk_base);
@@ -69,11 +69,6 @@ struct fixed_fact_conf {
struct parm mult_parm;
};
-struct fixed_rate_conf {
- unsigned long rate;
- struct parm rate_parm;
-};
-
struct composite_conf {
struct parm mux_parm;
struct parm div_parm;
@@ -89,7 +84,6 @@ struct composite_conf {
enum clk_type {
CLK_FIXED_FACTOR,
- CLK_FIXED_RATE,
CLK_COMPOSITE,
CLK_CPU,
CLK_PLL,
@@ -105,32 +99,12 @@ struct clk_conf {
unsigned long flags;
union {
struct fixed_fact_conf fixed_fact;
- struct fixed_rate_conf fixed_rate;
const struct composite_conf *composite;
struct pll_conf *pll;
const struct clk_div_table *div_table;
} conf;
};
-#define FIXED_RATE_P(_ro, _ci, _cn, _f, _c) \
- { \
- .reg_off = (_ro), \
- .clk_type = CLK_FIXED_RATE, \
- .clk_id = (_ci), \
- .clk_name = (_cn), \
- .flags = (_f), \
- .conf.fixed_rate.rate_parm = _c, \
- } \
-
-#define FIXED_RATE(_ci, _cn, _f, _r) \
- { \
- .clk_type = CLK_FIXED_RATE, \
- .clk_id = (_ci), \
- .clk_name = (_cn), \
- .flags = (_f), \
- .conf.fixed_rate.rate = (_r), \
- } \
-
#define PLL(_ro, _ci, _cn, _cp, _f, _c) \
{ \
.reg_off = (_ro), \
@@ -33,7 +33,6 @@
*
* [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
*/
-#define MESON8B_REG_CTL0_ADDR 0x0000
#define MESON8B_REG_SYS_CPU_CNTL1 0x015c /* 0x57 offset in data sheet */
#define MESON8B_REG_HHI_MPEG 0x0174 /* 0x5d offset in data sheet */
#define MESON8B_REG_MALI 0x01b0 /* 0x6c offset in data sheet */
@@ -149,12 +148,25 @@ static const struct composite_conf mali_conf __initconst = {
.gate_parm = PARM(0x00, 8, 1),
};
-static const struct clk_conf meson8b_xtal_conf __initconst =
- FIXED_RATE_P(MESON8B_REG_CTL0_ADDR, CLKID_XTAL, "xtal", 0,
- PARM(0x00, 4, 7));
+static struct clk_fixed_rate meson8b_xtal = {
+ .fixed_rate = 24000000,
+ .hw.init = &(struct clk_init_data){
+ .name = "xtal",
+ .num_parents = 0,
+ .ops = &clk_fixed_rate_ops,
+ },
+};
+
+static struct clk_fixed_rate meson8b_zero = {
+ .fixed_rate = 0,
+ .hw.init = &(struct clk_init_data){
+ .name = "zero",
+ .num_parents = 0,
+ .ops = &clk_fixed_rate_ops,
+ },
+};
static const struct clk_conf meson8b_clk_confs[] __initconst = {
- FIXED_RATE(CLKID_ZERO, "zero", 0, 0),
PLL(MESON8B_REG_PLL_FIXED, CLKID_PLL_FIXED, "fixed_pll",
p_xtal, 0, &pll_confs),
PLL(MESON8B_REG_PLL_VID, CLKID_PLL_VID, "vid_pll",
@@ -174,23 +186,29 @@ static const struct clk_conf meson8b_clk_confs[] __initconst = {
CLK_IGNORE_UNUSED, &mali_conf),
};
+/*
+ * FIXME we cannot register two providers w/o breaking things. Luckily only
+ * clk81 is actually used by any drivers. Convert clk81 to use
+ * clk_hw_onecell_data last and flip the switch to call of_clk_add_hw_provider
+ * instead of of_clk_add_provider in the clk81 conversion patch to keep from
+ * breaking bisect. Then delete this comment ;-)
+ */
+static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
+ .hws = {
+ [CLKID_XTAL] = &meson8b_xtal.hw,
+ [CLKID_ZERO] = &meson8b_zero.hw,
+ },
+ .num = CLK_NR_CLKS,
+};
+
static void __init meson8b_clkc_init(struct device_node *np)
{
void __iomem *clk_base;
+ int ret, clkid;
if (!meson_clk_init(np, CLK_NR_CLKS))
return;
- /* XTAL */
- clk_base = of_iomap(np, 0);
- if (!clk_base) {
- pr_err("%s: Unable to map xtal base\n", __func__);
- return;
- }
-
- meson_clk_register_clks(&meson8b_xtal_conf, 1, clk_base);
- iounmap(clk_base);
-
/* Generic clocks and PLLs */
clk_base = of_iomap(np, 1);
if (!clk_base) {
@@ -198,8 +216,29 @@ static void __init meson8b_clkc_init(struct device_node *np)
return;
}
+ /*
+ * register all clks
+ * CLKID_UNUSED = 0, so skip it and start with CLKID_XTAL = 1
+ */
+ for (clkid = CLKID_XTAL; clkid < CLK_NR_CLKS; clkid++) {
+ /* array might be sparse */
+ if (!meson8b_hw_onecell_data.hws[clkid])
+ continue;
+
+ /* FIXME convert to devm_clk_register */
+ ret = clk_hw_register(NULL, meson8b_hw_onecell_data.hws[clkid]);
+ if (ret)
+ goto unregister;
+ }
+
meson_clk_register_clks(meson8b_clk_confs,
ARRAY_SIZE(meson8b_clk_confs),
clk_base);
+ return;
+
+/* FIXME remove after converting to platform_driver/devm_clk_register */
+unregister:
+ for (clkid = CLK_NR_CLKS - 1; clkid >= 0; clkid--)
+ clk_hw_unregister(meson8b_hw_onecell_data.hws[clkid]);
}
CLK_OF_DECLARE(meson8b_clock, "amlogic,meson8b-clkc", meson8b_clkc_init);
Remove the fixed_rate registration function and helpers from clkc.[ch]. Replace unnecessary configuration struct with static initialization of the desired clock type. While we're here, begin the transition to a proper platform_driver and call of_clk_add_hw_provider with a shiny new struct clk_hw_onecell_data. Signed-off-by: Michael Turquette <mturquette@baylibre.com> --- drivers/clk/meson/clkc.c | 34 -------------------- drivers/clk/meson/clkc.h | 26 --------------- drivers/clk/meson/meson8b-clkc.c | 69 +++++++++++++++++++++++++++++++--------- 3 files changed, 54 insertions(+), 75 deletions(-)