| Message ID | 1467989201-14661-3-git-send-email-andi.shyti@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Fri, Jul 08, 2016 at 11:46:36PM +0900, Andi Shyti wrote: > These two properties were not documented but used in the spi > dts. Add the related documentation. > > Signed-off-by: Andi Shyti <andi.shyti@samsung.com> > --- > Documentation/devicetree/bindings/spi/spi-samsung.txt | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt > index 57d5539..2b7167e 100644 > --- a/Documentation/devicetree/bindings/spi/spi-samsung.txt > +++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt > @@ -24,6 +24,14 @@ Required SoC Specific Properties: > - dma-names: Names for the dma channels. There must be at least one channel > named "tx" for transmit and named "rx" for receive. > > +- clocks: specifies the clock IDs provided to the SPI controller; they are > + required for interacting with the controller itself, for synchronizing the bus > + and as I/O clock (the latter is required by exynos5433 and exynos7). > + > +- clock-names: string names of the clocks in the 'clocks' property; the names > + mut be "spi", "spi_busclkN" and "spi_ioclk", where N is determined by s/mut/must/ > + "samsung,spi-src-clk". Thanks for taking care of this! Older SoCs (like s3c-s5p) even though they do not set clk_from_cmu, it seems they required them as well... this is a little bit strange but at least now the documentation matches the driver. I would only describe the difference in number of clocks in more specific way, e.g.: - clock-names: string names of the clocks in the 'clocks' property; for all devices the names must be "spi", "spi_busclkN" (where N is determined by "samsung,spi-src-clk"); for Exynos5433 it must contain third clock named "spi_ioclk" ... or something similar. Anyway in general: Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt index 57d5539..2b7167e 100644 --- a/Documentation/devicetree/bindings/spi/spi-samsung.txt +++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt @@ -24,6 +24,14 @@ Required SoC Specific Properties: - dma-names: Names for the dma channels. There must be at least one channel named "tx" for transmit and named "rx" for receive. +- clocks: specifies the clock IDs provided to the SPI controller; they are + required for interacting with the controller itself, for synchronizing the bus + and as I/O clock (the latter is required by exynos5433 and exynos7). + +- clock-names: string names of the clocks in the 'clocks' property; the names + mut be "spi", "spi_busclkN" and "spi_ioclk", where N is determined by + "samsung,spi-src-clk". + Required Board Specific Properties: - #address-cells: should be 1.
These two properties were not documented but used in the spi dts. Add the related documentation. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> --- Documentation/devicetree/bindings/spi/spi-samsung.txt | 8 ++++++++ 1 file changed, 8 insertions(+)