@@ -1389,6 +1389,7 @@ enum {
static struct clk_branch gcc_usb3_phy_pipe_clk = {
.halt_check = BRANCH_HALT_DELAY,
+ .udelay = 50,
.clkr = {
.enable_reg = 0x50004,
.enable_mask = BIT(0),
@@ -2443,6 +2444,7 @@ enum {
static struct clk_branch gcc_pcie_0_pipe_clk = {
.halt_check = BRANCH_HALT_DELAY,
+ .udelay = 500,
.clkr = {
.enable_reg = 0x6b018,
.enable_mask = BIT(0),
@@ -2518,6 +2520,7 @@ enum {
static struct clk_branch gcc_pcie_1_pipe_clk = {
.halt_check = BRANCH_HALT_DELAY,
+ .udelay = 500,
.clkr = {
.enable_reg = 0x6d018,
.enable_mask = BIT(0),
@@ -2593,6 +2596,7 @@ enum {
static struct clk_branch gcc_pcie_2_pipe_clk = {
.halt_check = BRANCH_HALT_DELAY,
+ .udelay = 500,
.clkr = {
.enable_reg = 0x6e018,
.enable_mask = BIT(0),
@@ -2722,6 +2726,7 @@ enum {
static struct clk_branch gcc_ufs_tx_symbol_0_clk = {
.halt_check = BRANCH_HALT_DELAY,
+ .udelay = 500,
.clkr = {
.enable_reg = 0x75018,
.enable_mask = BIT(0),
@@ -2737,6 +2742,7 @@ enum {
static struct clk_branch gcc_ufs_rx_symbol_0_clk = {
.halt_check = BRANCH_HALT_DELAY,
+ .udelay = 500,
.clkr = {
.enable_reg = 0x7501c,
.enable_mask = BIT(0),
@@ -2752,6 +2758,7 @@ enum {
static struct clk_branch gcc_ufs_rx_symbol_1_clk = {
.halt_check = BRANCH_HALT_DELAY,
+ .udelay = 500,
.clkr = {
.enable_reg = 0x75020,
.enable_mask = BIT(0),
@@ -2809,6 +2816,7 @@ enum {
static struct clk_branch gcc_ufs_sys_clk_core_clk = {
.halt_check = BRANCH_HALT_DELAY,
+ .udelay = 500,
.clkr = {
.enable_reg = 0x76030,
.enable_mask = BIT(0),
@@ -2821,6 +2829,7 @@ enum {
static struct clk_branch gcc_ufs_tx_symbol_clk_core_clk = {
.halt_check = BRANCH_HALT_DELAY,
+ .udelay = 500,
.clkr = {
.enable_reg = 0x76034,
.enable_mask = BIT(0),
Some of the branch clocks in msm8996 which are marked with a BRANCH_HALT_DELAY require a little more than the default 10us delay, so specify some custom delays for such clocks Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> --- drivers/clk/qcom/gcc-msm8996.c | 9 +++++++++ 1 file changed, 9 insertions(+)