Message ID | 1478517877-23733-13-git-send-email-riteshh@codeaurora.org (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
On 07/11/16 13:24, Ritesh Harjani wrote: > Save the tuning phase once the tuning is performed. > This phase value will be used while calibrating DLL > for HS400 mode. > > Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> > --- > drivers/mmc/host/sdhci-msm.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c > index 2561c41..6431bb8 100644 > --- a/drivers/mmc/host/sdhci-msm.c > +++ b/drivers/mmc/host/sdhci-msm.c > @@ -74,6 +74,7 @@ > > #define CORE_VENDOR_SPEC_CAPABILITIES0 0x11c > > +#define INVALID_TUNING_PHASE -1 > #define TCXO_FREQ 19200000 > #define SDHCI_MSM_MIN_CLOCK 400000 > #define CORE_FREQ_100MHZ (100 * 1000 * 1000) > @@ -95,6 +96,7 @@ struct sdhci_msm_host { > bool use_14lpp_dll_reset; > bool tuning_done; > bool calibration_done; > + u8 saved_tuning_phase; > }; > > /* Platform specific tuning */ > @@ -134,6 +136,9 @@ static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase) > u32 config; > struct mmc_host *mmc = host->mmc; > > + if (phase > 0xf) > + return -EINVAL; > + > spin_lock_irqsave(&host->lock, flags); > > config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); > @@ -431,6 +436,8 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode) > int rc; > struct mmc_host *mmc = host->mmc; > struct mmc_ios ios = host->mmc->ios; > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); > > /* > * Tuning is required for SDR104, HS200 and HS400 cards and > @@ -455,6 +462,7 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode) > if (rc) > return rc; > > + msm_host->saved_tuning_phase = phase; > rc = mmc_send_tuning(mmc, opcode, NULL); > if (!rc) { > /* Tuning is successful at this tuning point */ > @@ -826,6 +834,8 @@ static int sdhci_msm_probe(struct platform_device *pdev) > > sdhci_get_of_property(pdev); > > + msm_host->saved_tuning_phase = INVALID_TUNING_PHASE; > + > /* Setup SDCC bus voter clock. */ > msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus"); > if (!IS_ERR(msm_host->bus_clk)) { > -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 2561c41..6431bb8 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -74,6 +74,7 @@ #define CORE_VENDOR_SPEC_CAPABILITIES0 0x11c +#define INVALID_TUNING_PHASE -1 #define TCXO_FREQ 19200000 #define SDHCI_MSM_MIN_CLOCK 400000 #define CORE_FREQ_100MHZ (100 * 1000 * 1000) @@ -95,6 +96,7 @@ struct sdhci_msm_host { bool use_14lpp_dll_reset; bool tuning_done; bool calibration_done; + u8 saved_tuning_phase; }; /* Platform specific tuning */ @@ -134,6 +136,9 @@ static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase) u32 config; struct mmc_host *mmc = host->mmc; + if (phase > 0xf) + return -EINVAL; + spin_lock_irqsave(&host->lock, flags); config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); @@ -431,6 +436,8 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode) int rc; struct mmc_host *mmc = host->mmc; struct mmc_ios ios = host->mmc->ios; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); /* * Tuning is required for SDR104, HS200 and HS400 cards and @@ -455,6 +462,7 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode) if (rc) return rc; + msm_host->saved_tuning_phase = phase; rc = mmc_send_tuning(mmc, opcode, NULL); if (!rc) { /* Tuning is successful at this tuning point */ @@ -826,6 +834,8 @@ static int sdhci_msm_probe(struct platform_device *pdev) sdhci_get_of_property(pdev); + msm_host->saved_tuning_phase = INVALID_TUNING_PHASE; + /* Setup SDCC bus voter clock. */ msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus"); if (!IS_ERR(msm_host->bus_clk)) {
Save the tuning phase once the tuning is performed. This phase value will be used while calibrating DLL for HS400 mode. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> --- drivers/mmc/host/sdhci-msm.c | 10 ++++++++++ 1 file changed, 10 insertions(+)