clk: renesas: rcar-gen2: Fix PLL0 on R-Car V2H and E2

Commit Message

Geert Uytterhoeven April 3, 2017, 10:02 a.m. UTC

R-Car V2H and E2 do not have the PLL0CR register, but use a fixed
multiplier (depending on mode pins) and divider.

This corrects the clock rate of "pll0" (PLL0 VCO after post divider) on
R-Car V2H and E2 from 1.5 GHz to 1 GHz.

Inspired by Sergei Shtylyov's work for the common R-Car Gen2 and RZ/G
Clock Pulse Generator support core.

Fixes: 7c4163aae3d8e5b9 ("ARM: dts: r8a7792: initial SoC device tree")
Fixes: 0dce5454d5c25858 ("ARM: shmobile: Initial r8a7794 SoC device tree")
Signed-off-by: Geert Uytterhoeven <[e-mail]>
---
 drivers/clk/renesas/clk-rcar-gen2.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

Patch

diff --git a/drivers/clk/renesas/clk-rcar-gen2.c b/drivers/clk/renesas/clk-rcar-gen2.c
index f39519edc645ca87..51a2479ed5d7c817 100644
--- a/drivers/clk/renesas/clk-rcar-gen2.c
+++ b/drivers/clk/renesas/clk-rcar-gen2.c
@@ -272,11 +272,14 @@  struct cpg_pll_config {
 	unsigned int extal_div;
 	unsigned int pll1_mult;
 	unsigned int pll3_mult;
+	unsigned int pll0_mult;		/* For R-Car V2H and E2 only */
 };
 
 static const struct cpg_pll_config cpg_pll_configs[8] __initconst = {
-	{ 1, 208, 106 }, { 1, 208,  88 }, { 1, 156,  80 }, { 1, 156,  66 },
-	{ 2, 240, 122 }, { 2, 240, 102 }, { 2, 208, 106 }, { 2, 208,  88 },
+	{ 1, 208, 106, 200 }, { 1, 208,  88, 200 },
+	{ 1, 156,  80, 150 }, { 1, 156,  66, 150 },
+	{ 2, 240, 122, 230 }, { 2, 240, 102, 230 },
+	{ 2, 208, 106, 200 }, { 2, 208,  88, 200 },
 };
 
 /* SDHI divisors */
@@ -298,6 +301,12 @@  static const struct clk_div_table cpg_sd01_div_table[] = {
 
 static u32 cpg_mode __initdata;
 
+static const char * const pll0_mult_match[] = {
+	"renesas,r8a7792-cpg-clocks",
+	"renesas,r8a7794-cpg-clocks",
+	NULL
+};
+
 static struct clk * __init
 rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg,
 			     const struct cpg_pll_config *config,
@@ -318,9 +327,15 @@  rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg,
 		 * clock implementation and we currently have no need to change
 		 * the multiplier value.
 		 */
-		u32 value = clk_readl(cpg->reg + CPG_PLL0CR);
+		if (of_device_compatible_match(np, pll0_mult_match)) {
+			/* R-Car V2H and E2 do not have PLL0CR */
+			mult = config->pll0_mult;
+			div = 3;
+		} else {
+			u32 value = clk_readl(cpg->reg + CPG_PLL0CR);
+			mult = ((value >> 24) & ((1 << 7) - 1)) + 1;
+		}
 		parent_name = "main";
-		mult = ((value >> 24) & ((1 << 7) - 1)) + 1;
 	} else if (!strcmp(name, "pll1")) {
 		parent_name = "main";
 		mult = config->pll1_mult / 2;