diff mbox

[5/6] dt-bindings: cpufreq: move Mediatek cpufreq dt-bindings document to proper place

Message ID 1493997974-17699-6-git-send-email-sean.wang@mediatek.com (mailing list archive)
State Not Applicable
Delegated to: Stephen Boyd
Headers show

Commit Message

Sean Wang May 5, 2017, 3:26 p.m. UTC 
From: Sean Wang <sean.wang@mediatek.com>

The old place is Documentation/devicetree/bindings/clock/ that would
let people hard to find how to use Mediatek cpufreq driver, so moving
it to the new place as other cpufreq dirvers are done would be better.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 .../devicetree/bindings/clock/mt8173-cpu-dvfs.txt  | 83 ----------------------
 .../bindings/cpufreq/cpufreq-mediatek.txt          | 83 ++++++++++++++++++++++
 2 files changed, 83 insertions(+), 83 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
 create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt

Comments

Viresh Kumar May 8, 2017, 4:18 a.m. UTC | #1 
On 05-05-17, 23:26, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> The old place is Documentation/devicetree/bindings/clock/ that would
> let people hard to find how to use Mediatek cpufreq driver, so moving
> it to the new place as other cpufreq dirvers are done would be better.
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
>  .../devicetree/bindings/clock/mt8173-cpu-dvfs.txt  | 83 ----------------------
>  .../bindings/cpufreq/cpufreq-mediatek.txt          | 83 ++++++++++++++++++++++
>  2 files changed, 83 insertions(+), 83 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
>  create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt

Please generate patches with:

git format-patch -C -M --thread=shallow

You would be required to resend this patch at least to let us see what has
changed.
Sean Wang May 8, 2017, 6:19 a.m. UTC | #2 
On Mon, 2017-05-08 at 09:48 +0530, Viresh Kumar wrote:
> On 05-05-17, 23:26, sean.wang@mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> > 
> > The old place is Documentation/devicetree/bindings/clock/ that would
> > let people hard to find how to use Mediatek cpufreq driver, so moving
> > it to the new place as other cpufreq dirvers are done would be better.
> > 
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> >  .../devicetree/bindings/clock/mt8173-cpu-dvfs.txt  | 83 ----------------------
> >  .../bindings/cpufreq/cpufreq-mediatek.txt          | 83 ++++++++++++++++++++++
> >  2 files changed, 83 insertions(+), 83 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
> >  create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
> 
> Please generate patches with:
> 
> git format-patch -C -M --thread=shallow
> 
> You would be required to resend this patch at least to let us see what has
> changed.
> 

Hi Viresh,

Okay, I will do it with you provided command again. 

What I did for the patch is just "git mv
Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt"
and no any changing data in the content.

thanks for your feedback

	Sean



--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Viresh Kumar May 8, 2017, 7:08 a.m. UTC | #3 
On 08-05-17, 14:19, Sean Wang wrote:
> Okay, I will do it with you provided command again. 
> 
> What I did for the patch is just "git mv
> Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
> Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt"
> and no any changing data in the content.

I was quite sure that you have done exactly that, but then we are
supposed to review and make sure you haven't done any mistakes.

That's where those options would make our life easier. Look at the
patch created by that command and you wouldn't see any diff at all.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
deleted file mode 100644
index 52b457c..0000000
--- a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
+++ /dev/null
@@ -1,83 +0,0 @@ 
-Device Tree Clock bindins for CPU DVFS of Mediatek MT8173 SoC
-
-Required properties:
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
-- clock-names: Should contain the following:
-	"cpu"		- The multiplexer for clock input of CPU cluster.
-	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
-			  source (usually MAINPLL) when the original CPU PLL is under
-			  transition and not stable yet.
-	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
-	generic clock consumer properties.
-- proc-supply: Regulator for Vproc of CPU cluster.
-
-Optional properties:
-- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
-	       needs to do "voltage tracking" to step by step scale up/down Vproc and
-	       Vsram to fit SoC specific needs. When absent, the voltage scaling
-	       flow is handled by hardware, hence no software "voltage tracking" is
-	       needed.
-
-Example:
---------
-	cpu0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x000>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA53SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-	};
-
-	cpu1: cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x001>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA53SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-	};
-
-	cpu2: cpu@100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x100>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA57SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-	};
-
-	cpu3: cpu@101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x101>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA57SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-	};
-
-	&cpu0 {
-		proc-supply = <&mt6397_vpca15_reg>;
-	};
-
-	&cpu1 {
-		proc-supply = <&mt6397_vpca15_reg>;
-	};
-
-	&cpu2 {
-		proc-supply = <&da9211_vcpu_reg>;
-		sram-supply = <&mt6397_vsramca7_reg>;
-	};
-
-	&cpu3 {
-		proc-supply = <&da9211_vcpu_reg>;
-		sram-supply = <&mt6397_vsramca7_reg>;
-	};
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
new file mode 100644
index 0000000..52b457c
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
@@ -0,0 +1,83 @@ 
+Device Tree Clock bindins for CPU DVFS of Mediatek MT8173 SoC
+
+Required properties:
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
+- clock-names: Should contain the following:
+	"cpu"		- The multiplexer for clock input of CPU cluster.
+	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
+			  source (usually MAINPLL) when the original CPU PLL is under
+			  transition and not stable yet.
+	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+	generic clock consumer properties.
+- proc-supply: Regulator for Vproc of CPU cluster.
+
+Optional properties:
+- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
+	       needs to do "voltage tracking" to step by step scale up/down Vproc and
+	       Vsram to fit SoC specific needs. When absent, the voltage scaling
+	       flow is handled by hardware, hence no software "voltage tracking" is
+	       needed.
+
+Example:
+--------
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x000>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x001>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x100>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x101>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	&cpu0 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu1 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu2 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
+
+	&cpu3 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};