new file mode 100644
@@ -0,0 +1,693 @@
+Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings
+===================================
+
+In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
+that have KRYO processors, the CPU ferequencies subset and voltage value
+of each OPP varies based on the silicon variant in use.
+Qualcomm Technologies, Inc. Process Voltage Scaling Tables
+defines the voltage and frequency value based on the msm-id in SMEM
+and speedbin blown in the efuse combination.
+The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
+to provide the OPP framework with required information (existing HW bitmap).
+This is used to determine the voltage and frequency value for each OPP of
+operating-points-v2 table when it is parsed by the OPP framework.
+
+Required properties:
+--------------------
+In 'cpus' nodes:
+- operating-points-v2: Phandle to the operating-points-v2 table to use.
+
+In 'operating-points-v2' table:
+- compatible: Should be
+ - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
+- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
+ efuse registers that has information about the
+ speedbin that is used to select the right frequency/voltage
+ value pair.
+ Please refer the for nvmem-cells
+ bindings Documentation/devicetree/bindings/nvmem/nvmem.txt
+ and also examples below.
+
+In every OPP node:
+- opp-supported-hw: A single 32 bit bitmap value, representing compatible HW.
+ Bitmap:
+ 0: MSM8996 V3, speedbin 0
+ 1: MSM8996 V3, speedbin 1
+ 2: MSM8996 V3, speedbin 2
+ 3: unused
+ 4: MSM8996 SG, speedbin 0
+ 5: MSM8996 SG, speedbin 1
+ 6: MSM8996 SG, speedbin 2
+ 7-31: unused
+
+Example 1:
+---------
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ clocks = <&kryocc 0>;
+ cpu-supply = <&pm8994_s11_saw>;
+ operating-points-v2 = <&cluster0_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ clocks = <&kryocc 0>;
+ cpu-supply = <&pm8994_s11_saw>;
+ operating-points-v2 = <&cluster0_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ clocks = <&kryocc 1>;
+ cpu-supply = <&pm8994_s11_saw>;
+ operating-points-v2 = <&cluster1_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ CPU3: cpu@101 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ clocks = <&kryocc 1>;
+ cpu-supply = <&pm8994_s11_saw>;
+ operating-points-v2 = <&cluster1_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_1>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU2>;
+ };
+
+ core1 {
+ cpu = <&CPU3>;
+ };
+ };
+ };
+ };
+
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+ opp-shared;
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 < 307200000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-384000000 {
+ opp-hz = /bits/ 64 < 384000000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-422400000 {
+ opp-hz = /bits/ 64 < 422400000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-460800000 {
+ opp-hz = /bits/ 64 < 460800000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 < 480000000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-537600000 {
+ opp-hz = /bits/ 64 < 537600000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-556800000 {
+ opp-hz = /bits/ 64 < 556800000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-614400000 {
+ opp-hz = /bits/ 64 < 614400000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-652800000 {
+ opp-hz = /bits/ 64 < 652800000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-691200000 {
+ opp-hz = /bits/ 64 < 691200000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-729600000 {
+ opp-hz = /bits/ 64 < 729600000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-768000000 {
+ opp-hz = /bits/ 64 < 768000000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-844800000 {
+ opp-hz = /bits/ 64 < 844800000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-902400000 {
+ opp-hz = /bits/ 64 < 902400000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-960000000 {
+ opp-hz = /bits/ 64 < 960000000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-979200000 {
+ opp-hz = /bits/ 64 < 979200000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1036800000 {
+ opp-hz = /bits/ 64 < 1036800000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1056000000 {
+ opp-hz = /bits/ 64 < 1056000000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 < 1113600000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1132800000 {
+ opp-hz = /bits/ 64 < 1132800000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1190400000 {
+ opp-hz = /bits/ 64 < 1190400000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1209600000 {
+ opp-hz = /bits/ 64 < 1209600000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1228800000 {
+ opp-hz = /bits/ 64 < 1228800000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1286400000 {
+ opp-hz = /bits/ 64 < 1286400000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 < 1324800000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x5>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1363200000 {
+ opp-hz = /bits/ 64 < 1363200000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x72>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 < 1401600000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x5>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1440000000 {
+ opp-hz = /bits/ 64 < 1440000000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1478400000 {
+ opp-hz = /bits/ 64 < 1478400000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1497600000 {
+ opp-hz = /bits/ 64 < 1497600000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x4>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1516800000 {
+ opp-hz = /bits/ 64 < 1516800000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1593600000 {
+ opp-hz = /bits/ 64 < 1593600000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x71>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1996800000 {
+ opp-hz = /bits/ 64 < 1996800000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x20>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2188800000 {
+ opp-hz = /bits/ 64 < 2188800000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x10>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
+ cluster1_opp: opp_table1 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+ opp-shared;
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 < 307200000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-384000000 {
+ opp-hz = /bits/ 64 < 384000000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-403200000 {
+ opp-hz = /bits/ 64 < 403200000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-460800000 {
+ opp-hz = /bits/ 64 < 460800000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 < 480000000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-537600000 {
+ opp-hz = /bits/ 64 < 537600000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-556800000 {
+ opp-hz = /bits/ 64 < 556800000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-614400000 {
+ opp-hz = /bits/ 64 < 614400000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-652800000 {
+ opp-hz = /bits/ 64 < 652800000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-691200000 {
+ opp-hz = /bits/ 64 < 691200000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-729600000 {
+ opp-hz = /bits/ 64 < 729600000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-748800000 {
+ opp-hz = /bits/ 64 < 748800000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-806400000 {
+ opp-hz = /bits/ 64 < 806400000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-825600000 {
+ opp-hz = /bits/ 64 < 825600000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-883200000 {
+ opp-hz = /bits/ 64 < 883200000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-902400000 {
+ opp-hz = /bits/ 64 < 902400000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-940800000 {
+ opp-hz = /bits/ 64 < 940800000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-979200000 {
+ opp-hz = /bits/ 64 < 979200000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1036800000 {
+ opp-hz = /bits/ 64 < 1036800000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1056000000 {
+ opp-hz = /bits/ 64 < 1056000000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 < 1113600000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1132800000 {
+ opp-hz = /bits/ 64 < 1132800000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1190400000 {
+ opp-hz = /bits/ 64 < 1190400000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1209600000 {
+ opp-hz = /bits/ 64 < 1209600000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1248000000 {
+ opp-hz = /bits/ 64 < 1248000000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1286400000 {
+ opp-hz = /bits/ 64 < 1286400000 >;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 < 1324800000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1363200000 {
+ opp-hz = /bits/ 64 < 1363200000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 < 1401600000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1440000000 {
+ opp-hz = /bits/ 64 < 1440000000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1478400000 {
+ opp-hz = /bits/ 64 < 1478400000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1516800000 {
+ opp-hz = /bits/ 64 < 1516800000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1555200000 {
+ opp-hz = /bits/ 64 < 1555200000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1593600000 {
+ opp-hz = /bits/ 64 < 1593600000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1632000000 {
+ opp-hz = /bits/ 64 < 1632000000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1670400000 {
+ opp-hz = /bits/ 64 < 1670400000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1708800000 {
+ opp-hz = /bits/ 64 < 1708800000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1747200000 {
+ opp-hz = /bits/ 64 < 1747200000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1785600000 {
+ opp-hz = /bits/ 64 < 1785600000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1804800000 {
+ opp-hz = /bits/ 64 < 1804800000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x6>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1824000000 {
+ opp-hz = /bits/ 64 < 1824000000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x71>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1900800000 {
+ opp-hz = /bits/ 64 < 1900800000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x74>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1920000000 {
+ opp-hz = /bits/ 64 < 1920000000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1977600000 {
+ opp-hz = /bits/ 64 < 1977600000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x30>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1996800000 {
+ opp-hz = /bits/ 64 < 1996800000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2054400000 {
+ opp-hz = /bits/ 64 < 2054400000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x30>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2073600000 {
+ opp-hz = /bits/ 64 < 2073600000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2150400000 {
+ opp-hz = /bits/ 64 < 2150400000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x31>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2246400000 {
+ opp-hz = /bits/ 64 < 2246400000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x10>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2342400000 {
+ opp-hz = /bits/ 64 < 2342400000 >;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x10>;
+ clock-latency-ns = <200000>;
+ };
+
+ };
+
+....
+
+reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+....
+ smem_mem: smem-mem@86000000 {
+ reg = <0x0 0x86000000 0x0 0x200000>;
+ no-map;
+ };
+....
+};
+
+smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+};
+
+soc {
+....
+ qfprom: qfprom@74000 {
+ compatible = "qcom,qfprom";
+ reg = <0x00074000 0x8ff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ....
+ speedbin_efuse: speedbin@133 {
+ reg = <0x133 0x1>;
+ bits = <5 3>;
+ };
+ };
+};
In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996 that have KRYO processors, the CPU ferequencies subset and voltage value of each OPP varies based on the silicon variant in use. Qualcomm Technologies, Inc. Process Voltage Scaling Tables defines the voltage and frequency value based on the msm-id in SMEM and speedbin blown in the efuse combination. The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC to provide the OPP framework with required information. This is used to determine the voltage and frequency value for each OPP of operating-points-v2 table when it is parsed by the OPP framework. This change adds documentation. Signed-off-by: Ilia Lin <ilialin@codeaurora.org> --- .../devicetree/bindings/opp/kryo-cpufreq.txt | 693 +++++++++++++++++++++ 1 file changed, 693 insertions(+) create mode 100644 Documentation/devicetree/bindings/opp/kryo-cpufreq.txt