diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 9c8b558ba19e..86059b9b91bf 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -371,6 +371,18 @@ config MEN_Z188_ADC
 	  This driver can also be built as a module. If so, the module will be
 	  called men_z188_adc.
 
+config MESON_SARADC
+	tristate "Amlogic Meson SAR ADC driver"
+	default ARCH_MESON
+	depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST)
+	select REGMAP_MMIO
+	help
+	  Say yes here to build support for the SAR ADC found in Amlogic Meson
+	  SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called meson_saradc.
+
 config MXS_LRADC
         tristate "Freescale i.MX23/i.MX28 LRADC"
         depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index d36c4be8d1fc..de05b9e75f8f 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_MCP3422) += mcp3422.o
 obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
+obj-$(CONFIG_MESON_SARADC) += meson_saradc.o
 obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
 obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
new file mode 100644
index 000000000000..4c189e5fd7cc
--- /dev/null
+++ b/drivers/iio/adc/meson_saradc.c
@@ -0,0 +1,893 @@
+/*
+ * Amlogic Meson Successive Approximation Register (SAR) A/D Converter
+ *
+ * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#define SAR_ADC_REG0						0x00
+	#define SAR_ADC_REG0_PANEL_DETECT			BIT(31)
+	#define SAR_ADC_REG0_BUSY_MASK				GENMASK(30, 28)
+	#define SAR_ADC_REG0_DELTA_BUSY				BIT(30)
+	#define SAR_ADC_REG0_AVG_BUSY				BIT(29)
+	#define SAR_ADC_REG0_SAMPLE_BUSY			BIT(28)
+	#define SAR_ADC_REG0_FIFO_FULL				BIT(27)
+	#define SAR_ADC_REG0_FIFO_EMPTY				BIT(26)
+	#define SAR_ADC_REG0_FIFO_COUNT_MASK			GENMASK(25, 21)
+	#define SAR_ADC_REG0_ADC_BIAS_CTRL_MASK			GENMASK(20, 19)
+	#define SAR_ADC_REG0_CURR_CHAN_ID_MASK			GENMASK(18, 16)
+	#define SAR_ADC_REG0_ADC_TEMP_SEN_SEL			BIT(15)
+	#define SAR_ADC_REG0_SAMPLING_STOP			BIT(14)
+	#define SAR_ADC_REG0_CHAN_DELTA_EN_MASK			GENMASK(13, 12)
+	#define SAR_ADC_REG0_DETECT_IRQ_POL			BIT(10)
+	#define SAR_ADC_REG0_DETECT_IRQ_EN			BIT(9)
+	#define SAR_ADC_REG0_FIFO_CNT_IRQ_MASK			GENMASK(8, 4)
+	#define SAR_ADC_REG0_FIFO_IRQ_EN			BIT(3)
+	#define SAR_ADC_REG0_SAMPLING_START			BIT(2)
+	#define SAR_ADC_REG0_CONTINUOUS_EN			BIT(1)
+	#define SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE		BIT(0)
+
+#define SAR_ADC_CHAN_LIST					0x04
+	#define SAR_ADC_CHAN_LIST_MAX_INDEX_MASK		GENMASK(26, 24)
+	#define SAR_ADC_CHAN_CHAN_ENTRY_MASK(_chan)		\
+					(GENMASK(2, 0) << (_chan * 3))
+
+#define SAR_ADC_AVG_CNTL					0x08
+	#define SAR_ADC_AVG_CNTL_AVG_MODE_SHIFT(_chan)		\
+					(16 + (_chan * 2))
+	#define SAR_ADC_AVG_CNTL_AVG_MODE_MASK(_chan)		\
+					(GENMASK(17, 16) << (_chan * 2))
+	#define SAR_ADC_AVG_CNTL_NUM_SAMPLES_SHIFT(_chan)	\
+					(0 + (_chan * 2))
+	#define SAR_ADC_AVG_CNTL_NUM_SAMPLES_MASK(_chan)	\
+					(GENMASK(1, 0) << (_chan * 2))
+
+#define SAR_ADC_REG3						0x0c
+	#define SAR_ADC_REG3_CNTL_USE_SC_DLY			BIT(31)
+	#define SAR_ADC_REG3_CLK_EN				BIT(30)
+	#define SAR_ADC_REG3_BL30_INITIALIZED			BIT(28)
+	#define SAR_ADC_REG3_CTRL_CONT_RING_COUNTER_EN		BIT(27)
+	#define SAR_ADC_REG3_CTRL_SAMPLING_CLOCK_PHASE		BIT(26)
+	#define SAR_ADC_REG3_CTRL_CHAN7_MUX_SEL_MASK		GENMASK(25, 23)
+	#define SAR_ADC_REG3_DETECT_EN				BIT(22)
+	#define SAR_ADC_REG3_ADC_EN				BIT(21)
+	#define SAR_ADC_REG3_PANEL_DETECT_COUNT_MASK		GENMASK(20, 18)
+	#define SAR_ADC_REG3_PANEL_DETECT_FILTER_TB_MASK	GENMASK(17, 16)
+	#define SAR_ADC_REG3_ADC_CLK_DIV_SHIFT			10
+	#define SAR_ADC_REG3_ADC_CLK_DIV_WIDTH			5
+	#define SAR_ADC_REG3_ADC_CLK_DIV_MASK			GENMASK(15, 10)
+	#define SAR_ADC_REG3_BLOCK_DLY_SEL_MASK			GENMASK(9, 8)
+	#define SAR_ADC_REG3_BLOCK_DLY_MASK			GENMASK(7, 0)
+
+#define SAR_ADC_DELAY						0x10
+	#define SAR_ADC_DELAY_INPUT_DLY_SEL_MASK		GENMASK(25, 24)
+	#define SAR_ADC_DELAY_BL30_BUSY				BIT(15)
+	#define SAR_ADC_DELAY_KERNEL_BUSY			BIT(14)
+	#define SAR_ADC_DELAY_INPUT_DLY_CNT_MASK		GENMASK(23, 16)
+	#define SAR_ADC_DELAY_SAMPLE_DLY_SEL_MASK		GENMASK(9, 8)
+	#define SAR_ADC_DELAY_SAMPLE_DLY_CNT_MASK		GENMASK(7, 0)
+
+#define SAR_ADC_LAST_RD						0x14
+	#define SAR_ADC_LAST_RD_LAST_CHANNEL1_MASK		GENMASK(23, 16)
+	#define SAR_ADC_LAST_RD_LAST_CHANNEL0_MASK		GENMASK(9, 0)
+
+#define SAR_ADC_FIFO_RD						0x18
+	#define SAR_ADC_FIFO_RD_CHAN_ID_MASK			GENMASK(14, 12)
+	#define SAR_ADC_FIFO_RD_SAMPLE_VALUE_MASK		GENMASK(11, 0)
+
+#define SAR_ADC_AUX_SW						0x1c
+	#define SAR_ADC_AUX_SW_MUX_SEL_CHAN_MASK(_chan)		\
+					(GENMASK(10, 8) << ((_chan - 2) * 2))
+	#define SAR_ADC_AUX_SW_VREF_P_MUX			BIT(6)
+	#define SAR_ADC_AUX_SW_VREF_N_MUX			BIT(5)
+	#define SAR_ADC_AUX_SW_MODE_SEL				BIT(4)
+	#define SAR_ADC_AUX_SW_YP_DRIVE_SW			BIT(3)
+	#define SAR_ADC_AUX_SW_XP_DRIVE_SW			BIT(2)
+	#define SAR_ADC_AUX_SW_YM_DRIVE_SW			BIT(1)
+	#define SAR_ADC_AUX_SW_XM_DRIVE_SW			BIT(0)
+
+#define SAR_ADC_CHAN_10_SW					0x20
+	#define SAR_ADC_CHAN_10_SW_CHAN1_MUX_SEL_MASK		GENMASK(25, 23)
+	#define SAR_ADC_CHAN_10_SW_CHAN1_VREF_P_MUX		BIT(22)
+	#define SAR_ADC_CHAN_10_SW_CHAN1_VREF_N_MUX		BIT(21)
+	#define SAR_ADC_CHAN_10_SW_CHAN1_MODE_SEL		BIT(20)
+	#define SAR_ADC_CHAN_10_SW_CHAN1_YP_DRIVE_SW		BIT(19)
+	#define SAR_ADC_CHAN_10_SW_CHAN1_XP_DRIVE_SW		BIT(18)
+	#define SAR_ADC_CHAN_10_SW_CHAN1_YM_DRIVE_SW		BIT(17)
+	#define SAR_ADC_CHAN_10_SW_CHAN1_XM_DRIVE_SW		BIT(16)
+	#define SAR_ADC_CHAN_10_SW_CHAN0_MUX_SEL_MASK		GENMASK(9, 7)
+	#define SAR_ADC_CHAN_10_SW_CHAN0_VREF_P_MUX		BIT(6)
+	#define SAR_ADC_CHAN_10_SW_CHAN0_VREF_N_MUX		BIT(5)
+	#define SAR_ADC_CHAN_10_SW_CHAN0_MODE_SEL		BIT(4)
+	#define SAR_ADC_CHAN_10_SW_CHAN0_YP_DRIVE_SW		BIT(3)
+	#define SAR_ADC_CHAN_10_SW_CHAN0_XP_DRIVE_SW		BIT(2)
+	#define SAR_ADC_CHAN_10_SW_CHAN0_YM_DRIVE_SW		BIT(1)
+	#define SAR_ADC_CHAN_10_SW_CHAN0_XM_DRIVE_SW		BIT(0)
+
+#define SAR_ADC_DETECT_IDLE_SW					0x24
+	#define SAR_ADC_DETECT_IDLE_SW_DETECT_SW_EN		BIT(26)
+	#define SAR_ADC_DETECT_IDLE_SW_DETECT_MODE_MUX_MASK	GENMASK(25, 23)
+	#define SAR_ADC_DETECT_IDLE_SW_DETECT_MODE_VREF_P_MUX	BIT(22)
+	#define SAR_ADC_DETECT_IDLE_SW_DETECT_MODE_VREF_N_MUX	BIT(21)
+	#define SAR_ADC_DETECT_IDLE_SW_DETECT_MODE_SEL		BIT(20)
+	#define SAR_ADC_DETECT_IDLE_SW_DETECT_MODE_YP_DRIVE_SW	BIT(19)
+	#define SAR_ADC_DETECT_IDLE_SW_DETECT_MODE_XP_DRIVE_SW	BIT(18)
+	#define SAR_ADC_DETECT_IDLE_SW_DETECT_MODE_YM_DRIVE_SW	BIT(17)
+	#define SAR_ADC_DETECT_IDLE_SW_DETECT_MODE_XM_DRIVE_SW	BIT(16)
+	#define SAR_ADC_DETECT_IDLE_SW_IDLE_MODE_MUX_SEL_MASK	GENMASK(9, 7)
+	#define SAR_ADC_DETECT_IDLE_SW_IDLE_MODE_VREF_P_MUX	BIT(6)
+	#define SAR_ADC_DETECT_IDLE_SW_IDLE_MODE_VREF_N_MUX	BIT(5)
+	#define SAR_ADC_DETECT_IDLE_SW_IDLE_MODE_SEL		BIT(4)
+	#define SAR_ADC_DETECT_IDLE_SW_IDLE_MODE_YP_DRIVE_SW	BIT(3)
+	#define SAR_ADC_DETECT_IDLE_SW_IDLE_MODE_XP_DRIVE_SW	BIT(2)
+	#define SAR_ADC_DETECT_IDLE_SW_IDLE_MODE_YM_DRIVE_SW	BIT(1)
+	#define SAR_ADC_DETECT_IDLE_SW_IDLE_MODE_XM_DRIVE_SW	BIT(0)
+
+#define SAR_ADC_DELTA_10					0x28
+	#define SAR_ADC_DELTA_10_TEMP_SEL			BIT(27)
+	#define SAR_ADC_DELTA_10_TS_REVE1			BIT(26)
+	#define SAR_ADC_DELTA_10_CHAN1_DELTA_VALUE_SHIFT	16
+	#define SAR_ADC_DELTA_10_CHAN1_DELTA_VALUE_MASK		GENMASK(25, 16)
+	#define SAR_ADC_DELTA_10_TS_REVE0			BIT(15)
+	#define SAR_ADC_DELTA_10_TS_C_SHIFT			11
+	#define SAR_ADC_DELTA_10_TS_C_MASK			GENMASK(14, 11)
+	#define SAR_ADC_DELTA_10_TS_VBG_EN			BIT(10)
+	#define SAR_ADC_DELTA_10_CHAN0_DELTA_VALUE_SHIFT	0
+	#define SAR_ADC_DELTA_10_CHAN0_DELTA_VALUE_MASK		GENMASK(9, 0)
+
+/*
+ * NOTE: registers from here are undocumented (the vendor Linux kernel driver
+ * and u-boot source served as reference). These only seem to be relevant on
+ * GXBB and newer.
+ */
+#define SAR_ADC_REG11						0x2c
+	#define SAR_ADC_REG11_BANDGAP_EN			BIT(13)
+
+#define SAR_ADC_REG13						0x34
+	#define SAR_ADC_REG13_12BIT_CALIBRATION_MASK		GENMASK(13, 8)
+
+#define SAR_ADC_MAX_FIFO_SIZE		32
+
+#define MESON_SAR_ADC_CHAN(_chan, _type) {				\
+	.type = _type,							\
+	.indexed = true,						\
+	.channel = _chan,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
+				BIT(IIO_CHAN_INFO_AVERAGE_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
+	.datasheet_name = "SAR_ADC_CH"#_chan,				\
+}
+
+/*
+ * TODO: the hardware supports IIO_TEMP for channel 6 as well which is
+ * currently not supported by this driver.
+ */
+static const struct iio_chan_spec meson_saradc_iio_channels[] = {
+	MESON_SAR_ADC_CHAN(0, IIO_VOLTAGE),
+	MESON_SAR_ADC_CHAN(1, IIO_VOLTAGE),
+	MESON_SAR_ADC_CHAN(2, IIO_VOLTAGE),
+	MESON_SAR_ADC_CHAN(3, IIO_VOLTAGE),
+	MESON_SAR_ADC_CHAN(4, IIO_VOLTAGE),
+	MESON_SAR_ADC_CHAN(5, IIO_VOLTAGE),
+	MESON_SAR_ADC_CHAN(6, IIO_VOLTAGE),
+	MESON_SAR_ADC_CHAN(7, IIO_VOLTAGE),
+	IIO_CHAN_SOFT_TIMESTAMP(8),
+};
+
+enum meson_saradc_avg_mode {
+	NO_AVERAGING = 0x0,
+	MEAN_AVERAGING = 0x1,
+	MEDIAN_AVERAGING = 0x2,
+};
+
+enum meson_saradc_num_samples {
+	ONE_SAMPLE = 0x0,
+	TWO_SAMPLES = 0x1,
+	FOUR_SAMPLES = 0x2,
+	EIGHT_SAMPLES = 0x3,
+};
+
+enum meson_saradc_chan7_mux_sel {
+	CHAN7_MUX_VSS = 0x0,
+	CHAN7_MUX_VDD_DIV4 = 0x1,
+	CHAN7_MUX_VDD_DIV2 = 0x2,
+	CHAN7_MUX_VDD_MUL3_DIV4 = 0x3,
+	CHAN7_MUX_VDD = 0x4,
+	CHAN7_MUX_CH7_INPUT = 0x7,
+};
+
+struct meson_saradc_data {
+	unsigned int			resolution;
+	const char			*name;
+};
+
+struct meson_saradc_priv {
+	struct regmap			*regmap;
+	struct regulator		*vref;
+	const struct meson_saradc_data	*data;
+	struct clk			*clkin;
+	struct clk			*core_clk;
+	struct clk			*sana_clk;
+	struct clk			*adc_sel_clk;
+	struct clk			*adc_clk;
+	struct clk_gate			clk_gate;
+	struct clk			*adc_div_clk;
+	struct clk_divider		clk_div;
+};
+
+static const struct regmap_config meson_saradc_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = SAR_ADC_REG13,
+};
+
+static unsigned int meson_saradc_get_fifo_count(struct iio_dev *indio_dev)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+	u32 regval;
+
+	regmap_read(priv->regmap, SAR_ADC_REG0, &regval);
+
+	return FIELD_GET(SAR_ADC_REG0_FIFO_COUNT_MASK, regval);
+}
+
+static int meson_saradc_wait_busy_clear(struct iio_dev *indio_dev)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+	int regval, timeout = 10000;
+
+	/*
+	 * NOTE: we need a small delay before reading the status, otherwise
+	 * the sample engine may not have started internally (which would
+	 * seem to us that sampling is already finished).
+	 */
+	do {
+		udelay(1);
+		regmap_read(priv->regmap, SAR_ADC_REG0, &regval);
+	} while (FIELD_GET(SAR_ADC_REG0_BUSY_MASK, regval) && timeout--);
+
+	if (timeout < 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int meson_saradc_read_raw_sample(struct iio_dev *indio_dev,
+					const struct iio_chan_spec *chan,
+					int *val)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+	int ret, regval, fifo_chan, fifo_val, sum = 0, count = 0;
+
+	ret = meson_saradc_wait_busy_clear(indio_dev);
+	if (ret)
+		return ret;
+
+	while (meson_saradc_get_fifo_count(indio_dev) > 0 &&
+	       count < SAR_ADC_MAX_FIFO_SIZE) {
+		regmap_read(priv->regmap, SAR_ADC_FIFO_RD, &regval);
+
+		fifo_chan = FIELD_GET(SAR_ADC_FIFO_RD_CHAN_ID_MASK, regval);
+		if (fifo_chan == chan->channel) {
+			fifo_val = FIELD_GET(SAR_ADC_FIFO_RD_SAMPLE_VALUE_MASK,
+						regval);
+			fifo_val &= (BIT(priv->data->resolution) - 1);
+
+			sum += fifo_val;
+			count++;
+		}
+	}
+
+	if (!count)
+		return -ENOENT;
+
+	*val = sum / count;
+
+	return 0;
+}
+
+static void meson_saradc_set_averaging(struct iio_dev *indio_dev,
+				       const struct iio_chan_spec *chan,
+				       enum meson_saradc_avg_mode mode,
+				       enum meson_saradc_num_samples samples)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+	u32 val;
+
+	val = samples << SAR_ADC_AVG_CNTL_NUM_SAMPLES_SHIFT(chan->channel);
+	regmap_update_bits(priv->regmap, SAR_ADC_AVG_CNTL,
+			   SAR_ADC_AVG_CNTL_NUM_SAMPLES_MASK(chan->channel),
+			   val);
+
+	val = mode << SAR_ADC_AVG_CNTL_AVG_MODE_SHIFT(chan->channel);
+	regmap_update_bits(priv->regmap, SAR_ADC_AVG_CNTL,
+			   SAR_ADC_AVG_CNTL_AVG_MODE_MASK(chan->channel), val);
+}
+
+static void meson_saradc_enable_channel(struct iio_dev *indio_dev,
+					const struct iio_chan_spec *chan)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+	u32 regval;
+
+	/* the SAR ADC engine allows sampling multiple channels at the same
+	 * time. to keep it simple we're only working with one *internal*
+	 * channel, which starts counting at index 0 (which means: count = 1).
+	 */
+	regval = FIELD_PREP(SAR_ADC_CHAN_LIST_MAX_INDEX_MASK, 0);
+	regmap_update_bits(priv->regmap, SAR_ADC_CHAN_LIST,
+			   SAR_ADC_CHAN_LIST_MAX_INDEX_MASK, regval);
+
+	/* map channel index 0 to the channel which we want to read */
+	regval = FIELD_PREP(SAR_ADC_CHAN_CHAN_ENTRY_MASK(0), chan->channel);
+	regmap_update_bits(priv->regmap, SAR_ADC_CHAN_LIST,
+			   SAR_ADC_CHAN_CHAN_ENTRY_MASK(0), regval);
+
+	regval = FIELD_PREP(SAR_ADC_DETECT_IDLE_SW_DETECT_MODE_MUX_MASK,
+			    chan->channel);
+	regmap_update_bits(priv->regmap, SAR_ADC_DETECT_IDLE_SW,
+			   SAR_ADC_DETECT_IDLE_SW_DETECT_MODE_MUX_MASK,
+			   regval);
+
+	regval = FIELD_PREP(SAR_ADC_DETECT_IDLE_SW_IDLE_MODE_MUX_SEL_MASK,
+			    chan->channel);
+	regmap_update_bits(priv->regmap, SAR_ADC_DETECT_IDLE_SW,
+			   SAR_ADC_DETECT_IDLE_SW_IDLE_MODE_MUX_SEL_MASK,
+			   regval);
+
+	if (chan->channel == 6)
+		regmap_update_bits(priv->regmap, SAR_ADC_DELTA_10,
+				   SAR_ADC_DELTA_10_TEMP_SEL, 0);
+}
+
+static void meson_saradc_set_channel7_mux(struct iio_dev *indio_dev,
+					  enum meson_saradc_chan7_mux_sel sel)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+	u32 regval;
+
+	regval = FIELD_PREP(SAR_ADC_REG3_CTRL_CHAN7_MUX_SEL_MASK, sel);
+	regmap_update_bits(priv->regmap, SAR_ADC_REG3,
+			   SAR_ADC_REG3_CTRL_CHAN7_MUX_SEL_MASK, regval);
+
+	usleep_range(10, 20);
+}
+
+static void meson_saradc_start_sample_engine(struct iio_dev *indio_dev)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+
+	regmap_update_bits(priv->regmap, SAR_ADC_REG0,
+			   SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE,
+			   SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE);
+
+	regmap_update_bits(priv->regmap, SAR_ADC_REG0,
+			   SAR_ADC_REG0_SAMPLING_START,
+			   SAR_ADC_REG0_SAMPLING_START);
+}
+
+static void meson_saradc_stop_sample_engine(struct iio_dev *indio_dev)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+
+	regmap_update_bits(priv->regmap, SAR_ADC_REG0,
+			   SAR_ADC_REG0_SAMPLING_STOP,
+			   SAR_ADC_REG0_SAMPLING_STOP);
+
+	/* wait until all modules are stopped */
+	meson_saradc_wait_busy_clear(indio_dev);
+
+	regmap_update_bits(priv->regmap, SAR_ADC_REG0,
+			   SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE, 0);
+}
+
+static void meson_saradc_lock(struct iio_dev *indio_dev)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+	int val;
+
+	mutex_lock(&indio_dev->mlock);
+
+	/* prevent BL30 from using the SAR ADC while we are using it */
+	regmap_update_bits(priv->regmap, SAR_ADC_DELAY,
+			   SAR_ADC_DELAY_KERNEL_BUSY,
+			   SAR_ADC_DELAY_KERNEL_BUSY);
+
+	/* wait until BL30 releases it's lock (so we can use the SAR ADC) */
+	do {
+		udelay(1);
+		regmap_read(priv->regmap, SAR_ADC_DELAY, &val);
+	} while (val & SAR_ADC_DELAY_BL30_BUSY);
+}
+
+static void meson_saradc_unlock(struct iio_dev *indio_dev)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+
+	/* allow BL30 to use the SAR ADC again */
+	regmap_update_bits(priv->regmap, SAR_ADC_DELAY,
+			   SAR_ADC_DELAY_KERNEL_BUSY, 0);
+
+	mutex_unlock(&indio_dev->mlock);
+}
+
+static void meson_saradc_clear_fifo(struct iio_dev *indio_dev)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+	int count;
+
+	for (count = 0; count < SAR_ADC_MAX_FIFO_SIZE; count++) {
+		if (!meson_saradc_get_fifo_count(indio_dev))
+			break;
+
+		regmap_read(priv->regmap, SAR_ADC_FIFO_RD, 0);
+	}
+}
+
+static int meson_saradc_get_sample(struct iio_dev *indio_dev,
+				   const struct iio_chan_spec *chan,
+				   enum meson_saradc_avg_mode avg_mode,
+				   enum meson_saradc_num_samples avg_samples,
+				   int *val)
+{
+	int ret;
+
+	meson_saradc_lock(indio_dev);
+
+	/* clear the FIFO to make sure we're not reading old values */
+	meson_saradc_clear_fifo(indio_dev);
+
+	meson_saradc_set_averaging(indio_dev, chan, avg_mode, avg_samples);
+
+	meson_saradc_enable_channel(indio_dev, chan);
+
+	meson_saradc_start_sample_engine(indio_dev);
+	ret = meson_saradc_read_raw_sample(indio_dev, chan, val);
+	meson_saradc_stop_sample_engine(indio_dev);
+
+	meson_saradc_unlock(indio_dev);
+
+	if (ret) {
+		dev_warn(indio_dev->dev.parent,
+			 "failed to read sample for channel %d: %d\n",
+			 chan->channel, ret);
+		return ret;
+	}
+
+	return IIO_VAL_INT;
+}
+
+static int meson_saradc_iio_info_read_raw(struct iio_dev *indio_dev,
+					  const struct iio_chan_spec *chan,
+					  int *val, int *val2, long mask)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		return meson_saradc_get_sample(indio_dev, chan, NO_AVERAGING,
+					       ONE_SAMPLE, val);
+		break;
+
+	case IIO_CHAN_INFO_AVERAGE_RAW:
+		return meson_saradc_get_sample(indio_dev, chan, MEAN_AVERAGING,
+					       EIGHT_SAMPLES, val);
+		break;
+
+	case IIO_CHAN_INFO_SCALE:
+		ret = regulator_get_voltage(priv->vref);
+		if (ret < 0) {
+			dev_err(indio_dev->dev.parent,
+				"failed to get vref voltage: %d\n", ret);
+			return ret;
+		}
+
+		*val = ret / 1000;
+		*val2 = priv->data->resolution;
+		return IIO_VAL_FRACTIONAL_LOG2;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int meson_saradc_clk_init(struct iio_dev *indio_dev, void __iomem *base)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+	struct clk_init_data init;
+	const char *clk_parents[1];
+
+	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_div",
+				   of_node_full_name(indio_dev->dev.of_node));
+	init.flags = 0;
+	init.ops = &clk_divider_ops;
+	clk_parents[0] = __clk_get_name(priv->clkin);
+	init.parent_names = clk_parents;
+	init.num_parents = 1;
+
+	priv->clk_div.reg = base + SAR_ADC_REG3;
+	priv->clk_div.shift = SAR_ADC_REG3_ADC_CLK_DIV_SHIFT;
+	priv->clk_div.width = SAR_ADC_REG3_ADC_CLK_DIV_WIDTH;
+	priv->clk_div.hw.init = &init;
+	priv->clk_div.flags = 0;
+
+	priv->adc_div_clk = devm_clk_register(&indio_dev->dev,
+					      &priv->clk_div.hw);
+	if (WARN_ON(IS_ERR(priv->adc_div_clk)))
+		return PTR_ERR(priv->adc_div_clk);
+
+	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_en",
+				   of_node_full_name(indio_dev->dev.of_node));
+	init.flags = CLK_SET_RATE_PARENT;
+	init.ops = &clk_gate_ops;
+	clk_parents[0] = __clk_get_name(priv->adc_div_clk);
+	init.parent_names = clk_parents;
+	init.num_parents = 1;
+
+	priv->clk_gate.reg = base + SAR_ADC_REG3;
+	priv->clk_gate.bit_idx = fls(SAR_ADC_REG3_CLK_EN);
+	priv->clk_gate.hw.init = &init;
+
+	priv->adc_clk = devm_clk_register(&indio_dev->dev, &priv->clk_gate.hw);
+	if (WARN_ON(IS_ERR(priv->adc_clk)))
+		return PTR_ERR(priv->adc_clk);
+
+	return 0;
+}
+
+static int meson_saradc_init(struct iio_dev *indio_dev)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+	int regval, ret;
+
+	/*
+	 * make sure we start at CH7 input since the other muxes are only used
+	 * for internal calibration.
+	 */
+	meson_saradc_set_channel7_mux(indio_dev, CHAN7_MUX_CH7_INPUT);
+
+	/*
+	 * leave sampling delay and the input clocks as configured by BL30 to
+	 * make sure BL30 gets the values it expects when reading the
+	 * temperature sensor.
+	 */
+	regmap_read(priv->regmap, SAR_ADC_REG3, &regval);
+	if (regval & SAR_ADC_REG3_BL30_INITIALIZED)
+		return 0;
+
+	meson_saradc_stop_sample_engine(indio_dev);
+
+	/* update the channel 6 MUX to select the temperature sensor */
+	regmap_update_bits(priv->regmap, SAR_ADC_REG0,
+			SAR_ADC_REG0_ADC_TEMP_SEN_SEL,
+			SAR_ADC_REG0_ADC_TEMP_SEN_SEL);
+
+	/* disable all channels by default */
+	regmap_write(priv->regmap, SAR_ADC_CHAN_LIST, 0x0);
+
+	regmap_update_bits(priv->regmap, SAR_ADC_REG3,
+			   SAR_ADC_REG3_CTRL_SAMPLING_CLOCK_PHASE, 0);
+	regmap_update_bits(priv->regmap, SAR_ADC_REG3,
+			   SAR_ADC_REG3_CNTL_USE_SC_DLY,
+			   SAR_ADC_REG3_CNTL_USE_SC_DLY);
+
+	/* delay between two samples = (10+1) * 1uS */
+	regmap_update_bits(priv->regmap, SAR_ADC_DELAY,
+			   SAR_ADC_DELAY_INPUT_DLY_CNT_MASK,
+			   FIELD_PREP(SAR_ADC_DELAY_SAMPLE_DLY_CNT_MASK, 10));
+	regmap_update_bits(priv->regmap, SAR_ADC_DELAY,
+			   SAR_ADC_DELAY_SAMPLE_DLY_SEL_MASK,
+			   FIELD_PREP(SAR_ADC_DELAY_SAMPLE_DLY_SEL_MASK, 0));
+
+	/* delay between two samples = (10+1) * 1uS */
+	regmap_update_bits(priv->regmap, SAR_ADC_DELAY,
+			   SAR_ADC_DELAY_INPUT_DLY_CNT_MASK,
+			   FIELD_PREP(SAR_ADC_DELAY_INPUT_DLY_CNT_MASK, 10));
+	regmap_update_bits(priv->regmap, SAR_ADC_DELAY,
+			   SAR_ADC_DELAY_INPUT_DLY_SEL_MASK,
+			   FIELD_PREP(SAR_ADC_DELAY_INPUT_DLY_SEL_MASK, 1));
+
+	ret = clk_set_parent(priv->adc_sel_clk, priv->clkin);
+	if (ret) {
+		dev_err(indio_dev->dev.parent,
+			"failed to set adc parent to clkin\n");
+		return ret;
+	}
+
+	ret = clk_set_rate(priv->adc_clk, 1200000);
+	if (ret) {
+		dev_err(indio_dev->dev.parent,
+			"failed to set adc clock rate\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int meson_saradc_hw_enable(struct iio_dev *indio_dev)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+	int ret;
+
+	meson_saradc_lock(indio_dev);
+
+	ret = regulator_enable(priv->vref);
+	if (ret < 0) {
+		dev_err(indio_dev->dev.parent,
+			"failed to enable vref regulator\n");
+		goto err_vref;
+	}
+
+	ret = clk_prepare_enable(priv->core_clk);
+	if (ret) {
+		dev_err(indio_dev->dev.parent, "failed to enable core clk\n");
+		goto err_core_clk;
+	}
+
+	ret = clk_prepare_enable(priv->sana_clk);
+	if (ret) {
+		dev_err(indio_dev->dev.parent, "failed to enable sana clk\n");
+		goto err_sana_clk;
+	}
+
+	regmap_update_bits(priv->regmap, SAR_ADC_REG11,
+			   SAR_ADC_REG11_BANDGAP_EN, SAR_ADC_REG11_BANDGAP_EN);
+	regmap_update_bits(priv->regmap, SAR_ADC_REG3, SAR_ADC_REG3_ADC_EN,
+			   SAR_ADC_REG3_ADC_EN);
+
+	udelay(5);
+
+	ret = clk_prepare_enable(priv->adc_clk);
+	if (ret) {
+		dev_err(indio_dev->dev.parent, "failed to enable adc clk\n");
+		goto err_adc_clk;
+	}
+
+	meson_saradc_unlock(indio_dev);
+
+	return 0;
+
+err_adc_clk:
+	regmap_update_bits(priv->regmap, SAR_ADC_REG3, SAR_ADC_REG3_ADC_EN, 0);
+	regmap_update_bits(priv->regmap, SAR_ADC_REG11,
+			   SAR_ADC_REG11_BANDGAP_EN, 0);
+	clk_disable_unprepare(priv->sana_clk);
+err_sana_clk:
+	clk_disable_unprepare(priv->core_clk);
+err_core_clk:
+	regulator_disable(priv->vref);
+err_vref:
+	meson_saradc_unlock(indio_dev);
+	return ret;
+}
+
+static void meson_saradc_hw_disable(struct iio_dev *indio_dev)
+{
+	struct meson_saradc_priv *priv = iio_priv(indio_dev);
+
+	meson_saradc_lock(indio_dev);
+
+	clk_disable_unprepare(priv->adc_clk);
+
+	regmap_update_bits(priv->regmap, SAR_ADC_REG3, SAR_ADC_REG3_ADC_EN, 0);
+	regmap_update_bits(priv->regmap, SAR_ADC_REG11,
+			   SAR_ADC_REG11_BANDGAP_EN, 0);
+
+	clk_disable_unprepare(priv->sana_clk);
+	clk_disable_unprepare(priv->core_clk);
+
+	regulator_disable(priv->vref);
+
+	meson_saradc_unlock(indio_dev);
+}
+
+static const struct iio_info meson_saradc_iio_info = {
+	.read_raw = meson_saradc_iio_info_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+struct meson_saradc_data meson_saradc_gxbb_data = {
+	.resolution = 10,
+	.name = "meson-gxbb-saradc",
+};
+
+struct meson_saradc_data meson_saradc_gxl_data = {
+	.resolution = 12,
+	.name = "meson-gxl-saradc",
+};
+
+static const struct of_device_id meson_saradc_of_match[] = {
+	{
+		.compatible = "amlogic,meson-gxbb-saradc",
+		.data = &meson_saradc_gxbb_data,
+	}, {
+		.compatible = "amlogic,meson-gxl-saradc",
+		.data = &meson_saradc_gxl_data,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, meson_saradc_of_match);
+
+static int meson_saradc_probe(struct platform_device *pdev)
+{
+	struct meson_saradc_priv *priv;
+	struct iio_dev *indio_dev;
+	struct resource *res;
+	void __iomem *base;
+	const struct of_device_id *match;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
+	if (!indio_dev) {
+		dev_err(&pdev->dev, "failed allocating iio device\n");
+		return -ENOMEM;
+	}
+
+	priv = iio_priv(indio_dev);
+
+	match = of_match_device(meson_saradc_of_match, &pdev->dev);
+	priv->data = match->data;
+
+	indio_dev->name = priv->data->name;
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->dev.of_node = pdev->dev.of_node;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &meson_saradc_iio_info;
+
+	indio_dev->channels = meson_saradc_iio_channels;
+	indio_dev->num_channels = ARRAY_SIZE(meson_saradc_iio_channels);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+					     &meson_saradc_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->clkin = devm_clk_get(&pdev->dev, "clkin");
+	if (IS_ERR(priv->clkin)) {
+		dev_err(&pdev->dev, "failed to get clkin\n");
+		return PTR_ERR(priv->clkin);
+	}
+
+	priv->core_clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(priv->core_clk)) {
+		dev_err(&pdev->dev, "failed to get core clk\n");
+		return PTR_ERR(priv->core_clk);
+	}
+
+	priv->sana_clk = devm_clk_get(&pdev->dev, "sana");
+	if (IS_ERR(priv->sana_clk)) {
+		if (PTR_ERR(priv->sana_clk) == -ENOENT) {
+			priv->sana_clk = NULL;
+		} else {
+			dev_err(&pdev->dev, "failed to get sana clk\n");
+			return PTR_ERR(priv->sana_clk);
+		}
+	}
+
+	priv->adc_clk = devm_clk_get(&pdev->dev, "adc_clk");
+	if (IS_ERR(priv->adc_clk)) {
+		if (PTR_ERR(priv->adc_clk) == -ENOENT) {
+			priv->adc_clk = NULL;
+		} else {
+			dev_err(&pdev->dev, "failed to get adc clk\n");
+			return PTR_ERR(priv->adc_clk);
+		}
+	}
+
+	priv->adc_sel_clk = devm_clk_get(&pdev->dev, "adc_sel");
+	if (IS_ERR(priv->adc_sel_clk)) {
+		if (PTR_ERR(priv->adc_sel_clk) == -ENOENT) {
+			priv->adc_sel_clk = NULL;
+		} else {
+			dev_err(&pdev->dev, "failed to get adc_sel clk\n");
+			return PTR_ERR(priv->adc_sel_clk);
+		}
+	}
+
+	/* on pre-GXBB SoCs the SAR ADC itself provides the ADC clock: */
+	if (!priv->adc_clk) {
+		ret = meson_saradc_clk_init(indio_dev, base);
+		if (ret)
+			return ret;
+	}
+
+	priv->vref = devm_regulator_get(&pdev->dev, "vref");
+	if (IS_ERR(priv->vref)) {
+		dev_err(&pdev->dev, "failed to get vref regulator\n");
+		return PTR_ERR(priv->vref);
+	}
+
+	ret = meson_saradc_init(indio_dev);
+	if (ret)
+		goto err;
+
+	ret = meson_saradc_hw_enable(indio_dev);
+	if (ret)
+		goto err;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto err_hw;
+
+	return 0;
+
+err_hw:
+	meson_saradc_hw_disable(indio_dev);
+err:
+	return ret;
+}
+
+static int meson_saradc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	meson_saradc_hw_disable(indio_dev);
+	iio_device_unregister(indio_dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int meson_saradc_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+
+	meson_saradc_hw_disable(indio_dev);
+
+	return 0;
+}
+
+static int meson_saradc_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+
+	return meson_saradc_hw_enable(indio_dev);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(meson_saradc_pm_ops,
+			 meson_saradc_suspend, meson_saradc_resume);
+
+static struct platform_driver meson_saradc_driver = {
+	.probe		= meson_saradc_probe,
+	.remove		= meson_saradc_remove,
+	.driver		= {
+		.name	= "meson-saradc",
+		.of_match_table = meson_saradc_of_match,
+		.pm = &meson_saradc_pm_ops,
+	},
+};
+
+module_platform_driver(meson_saradc_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Amlogic Meson SAR ADC driver");
+MODULE_LICENSE("GPL v2");
