diff mbox

[v2,7/9] clk: meson8b: add the mplls clocks 0, 1 and 2

Message ID 20170309104154.28295-8-jbrunet@baylibre.com (mailing list archive)
State Accepted
Headers show

Commit Message

Jerome Brunet March 9, 2017, 10:41 a.m. UTC
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/meson/meson8b.c | 103 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/meson8b.h |  20 ++++++++-
 2 files changed, 122 insertions(+), 1 deletion(-)

Comments

Michael Turquette March 21, 2017, 11:21 p.m. UTC | #1
Quoting Jerome Brunet (2017-03-09 02:41:52)
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>

Hmm, even for obvious patches like this it is still better to have some
sort of changelog :-/

Otherwise patch appears fine to me.

Regards,
Mike

> ---
>  drivers/clk/meson/meson8b.c | 103 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/clk/meson/meson8b.h |  20 ++++++++-
>  2 files changed, 122 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
> index 2937443d4505..e9985503165c 100644
> --- a/drivers/clk/meson/meson8b.c
> +++ b/drivers/clk/meson/meson8b.c
> @@ -245,6 +245,96 @@ static struct clk_fixed_factor meson8b_fclk_div7 = {
>         },
>  };
>  
> +static struct meson_clk_mpll meson8b_mpll0 = {
> +       .sdm = {
> +               .reg_off = HHI_MPLL_CNTL7,
> +               .shift   = 0,
> +               .width   = 14,
> +       },
> +       .sdm_en = {
> +               .reg_off = HHI_MPLL_CNTL7,
> +               .shift   = 15,
> +               .width   = 1,
> +       },
> +       .n2 = {
> +               .reg_off = HHI_MPLL_CNTL7,
> +               .shift   = 16,
> +               .width   = 9,
> +       },
> +       .en = {
> +               .reg_off = HHI_MPLL_CNTL7,
> +               .shift   = 14,
> +               .width   = 1,
> +       },
> +       .lock = &clk_lock,
> +       .hw.init = &(struct clk_init_data){
> +               .name = "mpll0",
> +               .ops = &meson_clk_mpll_ops,
> +               .parent_names = (const char *[]){ "fixed_pll" },
> +               .num_parents = 1,
> +       },
> +};
> +
> +static struct meson_clk_mpll meson8b_mpll1 = {
> +       .sdm = {
> +               .reg_off = HHI_MPLL_CNTL8,
> +               .shift   = 0,
> +               .width   = 14,
> +       },
> +       .sdm_en = {
> +               .reg_off = HHI_MPLL_CNTL8,
> +               .shift   = 15,
> +               .width   = 1,
> +       },
> +       .n2 = {
> +               .reg_off = HHI_MPLL_CNTL8,
> +               .shift   = 16,
> +               .width   = 9,
> +       },
> +       .en = {
> +               .reg_off = HHI_MPLL_CNTL8,
> +               .shift   = 14,
> +               .width   = 1,
> +       },
> +       .lock = &clk_lock,
> +       .hw.init = &(struct clk_init_data){
> +               .name = "mpll1",
> +               .ops = &meson_clk_mpll_ops,
> +               .parent_names = (const char *[]){ "fixed_pll" },
> +               .num_parents = 1,
> +       },
> +};
> +
> +static struct meson_clk_mpll meson8b_mpll2 = {
> +       .sdm = {
> +               .reg_off = HHI_MPLL_CNTL9,
> +               .shift   = 0,
> +               .width   = 14,
> +       },
> +       .sdm_en = {
> +               .reg_off = HHI_MPLL_CNTL9,
> +               .shift   = 15,
> +               .width   = 1,
> +       },
> +       .n2 = {
> +               .reg_off = HHI_MPLL_CNTL9,
> +               .shift   = 16,
> +               .width   = 9,
> +       },
> +       .en = {
> +               .reg_off = HHI_MPLL_CNTL9,
> +               .shift   = 14,
> +               .width   = 1,
> +       },
> +       .lock = &clk_lock,
> +       .hw.init = &(struct clk_init_data){
> +               .name = "mpll2",
> +               .ops = &meson_clk_mpll_ops,
> +               .parent_names = (const char *[]){ "fixed_pll" },
> +               .num_parents = 1,
> +       },
> +};
> +
>  /*
>   * FIXME cpu clocks and the legacy composite clocks (e.g. clk81) are both PLL
>   * post-dividers and should be modeled with their respective PLLs via the
> @@ -491,6 +581,9 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
>                 [CLKID_AO_AHB_SRAM]         = &meson8b_ao_ahb_sram.hw,
>                 [CLKID_AO_AHB_BUS]          = &meson8b_ao_ahb_bus.hw,
>                 [CLKID_AO_IFACE]            = &meson8b_ao_iface.hw,
> +               [CLKID_MPLL0]               = &meson8b_mpll0.hw,
> +               [CLKID_MPLL1]               = &meson8b_mpll1.hw,
> +               [CLKID_MPLL2]               = &meson8b_mpll2.hw,
>         },
>         .num = CLK_NR_CLKS,
>  };
> @@ -501,6 +594,12 @@ static struct meson_clk_pll *const meson8b_clk_plls[] = {
>         &meson8b_sys_pll,
>  };
>  
> +static struct meson_clk_mpll *const meson8b_clk_mplls[] = {
> +       &meson8b_mpll0,
> +       &meson8b_mpll1,
> +       &meson8b_mpll2,
> +};
> +
>  static struct clk_gate *const meson8b_clk_gates[] = {
>         &meson8b_clk81,
>         &meson8b_ddr,
> @@ -609,6 +708,10 @@ static int meson8b_clkc_probe(struct platform_device *pdev)
>         for (i = 0; i < ARRAY_SIZE(meson8b_clk_plls); i++)
>                 meson8b_clk_plls[i]->base = clk_base;
>  
> +       /* Populate base address for MPLLs */
> +       for (i = 0; i < ARRAY_SIZE(meson8b_clk_mplls); i++)
> +               meson8b_clk_mplls[i]->base = clk_base;
> +
>         /* Populate the base address for CPU clk */
>         meson8b_cpu_clk.base = clk_base;
>  
> diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
> index 010e9582888d..3881defc8644 100644
> --- a/drivers/clk/meson/meson8b.h
> +++ b/drivers/clk/meson/meson8b.h
> @@ -42,6 +42,21 @@
>  #define HHI_VID_PLL_CNTL               0x320 /* 0xc8 offset in data sheet */
>  
>  /*
> + * MPLL register offeset taken from the S905 datasheet. Vendor kernel source
> + * confirm these are the same for the S805.
> + */
> +#define HHI_MPLL_CNTL                  0x280 /* 0xa0 offset in data sheet */
> +#define HHI_MPLL_CNTL2                 0x284 /* 0xa1 offset in data sheet */
> +#define HHI_MPLL_CNTL3                 0x288 /* 0xa2 offset in data sheet */
> +#define HHI_MPLL_CNTL4                 0x28C /* 0xa3 offset in data sheet */
> +#define HHI_MPLL_CNTL5                 0x290 /* 0xa4 offset in data sheet */
> +#define HHI_MPLL_CNTL6                 0x294 /* 0xa5 offset in data sheet */
> +#define HHI_MPLL_CNTL7                 0x298 /* 0xa6 offset in data sheet */
> +#define HHI_MPLL_CNTL8                 0x29C /* 0xa7 offset in data sheet */
> +#define HHI_MPLL_CNTL9                 0x2A0 /* 0xa8 offset in data sheet */
> +#define HHI_MPLL_CNTL10                        0x2A4 /* 0xa9 offset in data sheet */
> +
> +/*
>   * CLKID index values
>   *
>   * These indices are entirely contrived and do not map onto the hardware.
> @@ -142,8 +157,11 @@
>  #define CLKID_AO_AHB_SRAM      90
>  #define CLKID_AO_AHB_BUS       91
>  #define CLKID_AO_IFACE         92
> +#define CLKID_MPLL0            93
> +#define CLKID_MPLL1            94
> +#define CLKID_MPLL2            95
>  
> -#define CLK_NR_CLKS            93
> +#define CLK_NR_CLKS            96
>  
>  /* include the CLKIDs that have been made part of the stable DT binding */
>  #include <dt-bindings/clock/meson8b-clkc.h>
> -- 
> 2.9.3
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 2937443d4505..e9985503165c 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -245,6 +245,96 @@  static struct clk_fixed_factor meson8b_fclk_div7 = {
 	},
 };
 
+static struct meson_clk_mpll meson8b_mpll0 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 15,
+		.width   = 1,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 14,
+		.width   = 1,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct meson_clk_mpll meson8b_mpll1 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 15,
+		.width   = 1,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 14,
+		.width   = 1,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct meson_clk_mpll meson8b_mpll2 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 15,
+		.width   = 1,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 14,
+		.width   = 1,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
 /*
  * FIXME cpu clocks and the legacy composite clocks (e.g. clk81) are both PLL
  * post-dividers and should be modeled with their respective PLLs via the
@@ -491,6 +581,9 @@  static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
 		[CLKID_AO_AHB_SRAM]	    = &meson8b_ao_ahb_sram.hw,
 		[CLKID_AO_AHB_BUS]	    = &meson8b_ao_ahb_bus.hw,
 		[CLKID_AO_IFACE]	    = &meson8b_ao_iface.hw,
+		[CLKID_MPLL0]		    = &meson8b_mpll0.hw,
+		[CLKID_MPLL1]		    = &meson8b_mpll1.hw,
+		[CLKID_MPLL2]		    = &meson8b_mpll2.hw,
 	},
 	.num = CLK_NR_CLKS,
 };
@@ -501,6 +594,12 @@  static struct meson_clk_pll *const meson8b_clk_plls[] = {
 	&meson8b_sys_pll,
 };
 
+static struct meson_clk_mpll *const meson8b_clk_mplls[] = {
+	&meson8b_mpll0,
+	&meson8b_mpll1,
+	&meson8b_mpll2,
+};
+
 static struct clk_gate *const meson8b_clk_gates[] = {
 	&meson8b_clk81,
 	&meson8b_ddr,
@@ -609,6 +708,10 @@  static int meson8b_clkc_probe(struct platform_device *pdev)
 	for (i = 0; i < ARRAY_SIZE(meson8b_clk_plls); i++)
 		meson8b_clk_plls[i]->base = clk_base;
 
+	/* Populate base address for MPLLs */
+	for (i = 0; i < ARRAY_SIZE(meson8b_clk_mplls); i++)
+		meson8b_clk_mplls[i]->base = clk_base;
+
 	/* Populate the base address for CPU clk */
 	meson8b_cpu_clk.base = clk_base;
 
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index 010e9582888d..3881defc8644 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -42,6 +42,21 @@ 
 #define HHI_VID_PLL_CNTL		0x320 /* 0xc8 offset in data sheet */
 
 /*
+ * MPLL register offeset taken from the S905 datasheet. Vendor kernel source
+ * confirm these are the same for the S805.
+ */
+#define HHI_MPLL_CNTL			0x280 /* 0xa0 offset in data sheet */
+#define HHI_MPLL_CNTL2			0x284 /* 0xa1 offset in data sheet */
+#define HHI_MPLL_CNTL3			0x288 /* 0xa2 offset in data sheet */
+#define HHI_MPLL_CNTL4			0x28C /* 0xa3 offset in data sheet */
+#define HHI_MPLL_CNTL5			0x290 /* 0xa4 offset in data sheet */
+#define HHI_MPLL_CNTL6			0x294 /* 0xa5 offset in data sheet */
+#define HHI_MPLL_CNTL7			0x298 /* 0xa6 offset in data sheet */
+#define HHI_MPLL_CNTL8			0x29C /* 0xa7 offset in data sheet */
+#define HHI_MPLL_CNTL9			0x2A0 /* 0xa8 offset in data sheet */
+#define HHI_MPLL_CNTL10			0x2A4 /* 0xa9 offset in data sheet */
+
+/*
  * CLKID index values
  *
  * These indices are entirely contrived and do not map onto the hardware.
@@ -142,8 +157,11 @@ 
 #define CLKID_AO_AHB_SRAM	90
 #define CLKID_AO_AHB_BUS	91
 #define CLKID_AO_IFACE		92
+#define CLKID_MPLL0		93
+#define CLKID_MPLL1		94
+#define CLKID_MPLL2		95
 
-#define CLK_NR_CLKS		93
+#define CLK_NR_CLKS		96
 
 /* include the CLKIDs that have been made part of the stable DT binding */
 #include <dt-bindings/clock/meson8b-clkc.h>