diff mbox

[05/15] serial: 8250_ingenic: Add support for the JZ4770 SoC

Message ID 20170607200439.24450-6-paul@crapouillou.net (mailing list archive)
State Superseded
Headers show

Commit Message

Paul Cercueil June 7, 2017, 8:04 p.m. UTC
The JZ4770 SoC's UART is no different from the other JZ SoCs, so this
commit simply adds the ingenic,jz4770-uart compatible string.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 Documentation/devicetree/bindings/serial/ingenic,uart.txt | 3 ++-
 drivers/tty/serial/8250/8250_ingenic.c                    | 5 +++++
 2 files changed, 7 insertions(+), 1 deletion(-)

Comments

Rob Herring (Arm) June 9, 2017, 2:22 p.m. UTC | #1
On Wed, Jun 07, 2017 at 10:04:29PM +0200, Paul Cercueil wrote:
> The JZ4770 SoC's UART is no different from the other JZ SoCs, so this
> commit simply adds the ingenic,jz4770-uart compatible string.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  Documentation/devicetree/bindings/serial/ingenic,uart.txt | 3 ++-
>  drivers/tty/serial/8250/8250_ingenic.c                    | 5 +++++
>  2 files changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
> index 02cb7fe59cb7..75fd8b314af9 100644
> --- a/Documentation/devicetree/bindings/serial/ingenic,uart.txt
> +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
> @@ -2,7 +2,8 @@
>  
>  Required properties:
>  - compatible : "ingenic,jz4740-uart", "ingenic,jz4760-uart",
> -	"ingenic,jz4775-uart" or "ingenic,jz4780-uart"
> +	"ingenic,jz4770-uart", "ingenic,jz4775-uart" or
> +	"ingenic,jz4780-uart"

If you respin, please reformat to 1 per line.

Acked-by: Rob Herring <robh@kernel.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
index 02cb7fe59cb7..75fd8b314af9 100644
--- a/Documentation/devicetree/bindings/serial/ingenic,uart.txt
+++ b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
@@ -2,7 +2,8 @@ 
 
 Required properties:
 - compatible : "ingenic,jz4740-uart", "ingenic,jz4760-uart",
-	"ingenic,jz4775-uart" or "ingenic,jz4780-uart"
+	"ingenic,jz4770-uart", "ingenic,jz4775-uart" or
+	"ingenic,jz4780-uart"
 - reg : offset and length of the register set for the device.
 - interrupts : should contain uart interrupt.
 - clocks : phandles to the module & baud clocks.
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index 4d9dc10e265c..b31b2ca552d1 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -133,6 +133,10 @@  EARLYCON_DECLARE(jz4740_uart, ingenic_early_console_setup);
 OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart",
 		    ingenic_early_console_setup);
 
+EARLYCON_DECLARE(jz4770_uart, ingenic_early_console_setup);
+OF_EARLYCON_DECLARE(jz4770_uart, "ingenic,jz4770-uart",
+		    ingenic_early_console_setup);
+
 EARLYCON_DECLARE(jz4775_uart, ingenic_early_console_setup);
 OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart",
 		    ingenic_early_console_setup);
@@ -327,6 +331,7 @@  static const struct ingenic_uart_config jz4780_uart_config = {
 static const struct of_device_id of_match[] = {
 	{ .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config },
 	{ .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config },
+	{ .compatible = "ingenic,jz4770-uart", .data = &jz4760_uart_config },
 	{ .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config },
 	{ .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config },
 	{ /* sentinel */ }