| Message ID | 20180408031938.153474-6-yixun.lan@amlogic.com (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
On Sun, 2018-04-08 at 11:19 +0800, Yixun Lan wrote: > From: Qiufang Dai <qiufang.dai@amlogic.com> > > Adds a Clock and Reset controller driver for the Always-On part > of the Amlogic Meson-AXG SoC. > > Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> > Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> > --- > drivers/clk/meson/Makefile | 2 +- > drivers/clk/meson/axg-aoclk.c | 164 ++++++++++++++++++++++++++++++++++++++++++ > drivers/clk/meson/axg-aoclk.h | 31 ++++++++ > 3 files changed, 196 insertions(+), 1 deletion(-) > create mode 100644 drivers/clk/meson/axg-aoclk.c > create mode 100644 drivers/clk/meson/axg-aoclk.h > > diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile > index 555ab9c6ab64..fa6d1e36cef6 100644 > --- a/drivers/clk/meson/Makefile > +++ b/drivers/clk/meson/Makefile > @@ -5,5 +5,5 @@ > obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o > obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o > obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o meson-aoclk.o gxbb-aoclk.o gxbb-aoclk-32k.o > -obj-$(CONFIG_COMMON_CLK_AXG) += axg.o > +obj-$(CONFIG_COMMON_CLK_AXG) += axg.o meson-aoclk.o axg-aoclk.o ^ As hinted in patch 1, not ending well =======| You are putting this object in 2 modules. What you should have done is : - Add a Kconfig CONFIG_COMMON_CLK_MESON_AO (same as CONFIG_COMMON_CLK_AMLOGIC) selected by GXBB and AXG. - Compile meson-aoclk.o according to this new configuration > obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o > diff --git a/drivers/clk/meson/axg-aoclk.c b/drivers/clk/meson/axg-aoclk.c > new file mode 100644 > index 000000000000..cb56d809d3df > --- /dev/null > +++ b/drivers/clk/meson/axg-aoclk.c > @@ -0,0 +1,164 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Amlogic Meson-AXG Clock Controller Driver > + * > + * Copyright (c) 2016 Baylibre SAS. > + * Author: Michael Turquette <mturquette@baylibre.com> > + * > + * Copyright (c) 2018 Amlogic, inc. > + * Author: Qiufang Dai <qiufang.dai@amlogic.com> > + */ > +#include <linux/clk-provider.h> > +#include <linux/platform_device.h> > +#include <linux/reset-controller.h> > +#include <linux/mfd/syscon.h> > +#include <linux/init.h> > +#include "clkc.h" > +#include "axg-aoclk.h" > + > +#define AXG_AO_GATE(_name, _bit) \ > +static struct clk_regmap _name##_ao = { \ > + .data = &(struct clk_regmap_gate_data) { \ > + .offset = (AO_RTI_GEN_CNTL_REG0), \ > + .bit_idx = (_bit), \ > + }, \ > + .hw.init = &(struct clk_init_data) { \ > + .name = #_name "_ao", \ > + .ops = &clk_regmap_gate_ops, \ > + .parent_names = (const char *[]){ "clk81" }, \ > + .num_parents = 1, \ > + .flags = CLK_IGNORE_UNUSED, \ > + }, \ > +} > + > +AXG_AO_GATE(remote, 0); > +AXG_AO_GATE(i2c_master, 1); > +AXG_AO_GATE(i2c_slave, 2); > +AXG_AO_GATE(uart1, 3); > +AXG_AO_GATE(uart2, 5); > +AXG_AO_GATE(ir_blaster, 6); > +AXG_AO_GATE(saradc, 7); > + > +static struct clk_regmap ao_clk81 = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = AO_RTI_PWR_CNTL_REG0, > + .mask = 0x1, > + .shift = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "ao_clk81", > + .ops = &clk_regmap_mux_ro_ops, > + .parent_names = (const char *[]){ "clk81", "ao_alt_xtal"}, > + .num_parents = 2, > + }, > +}; > + > +static struct clk_regmap axg_saradc_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = AO_SAR_CLK, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "axg_saradc_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_names = (const char *[]){ "xtal", "ao_clk81" }, > + .num_parents = 2, > + }, > +}; > + > +static struct clk_regmap axg_saradc_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = AO_SAR_CLK, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "axg_saradc_div", > + .ops = &clk_regmap_divider_ops, > + .parent_names = (const char *[]){ "axg_saradc_mux" }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap axg_saradc_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = AO_SAR_CLK, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "axg_saradc_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_names = (const char *[]){ "axg_saradc_div" }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const unsigned int axg_aoclk_reset[] = { > + [RESET_AO_REMOTE] = 16, > + [RESET_AO_I2C_MASTER] = 18, > + [RESET_AO_I2C_SLAVE] = 19, > + [RESET_AO_UART1] = 17, > + [RESET_AO_UART2] = 22, > + [RESET_AO_IR_BLASTER] = 23, > +}; > + > +static struct clk_regmap *axg_aoclk_regmap[] = { > + [CLKID_AO_REMOTE] = &remote_ao, > + [CLKID_AO_I2C_MASTER] = &i2c_master_ao, > + [CLKID_AO_I2C_SLAVE] = &i2c_slave_ao, > + [CLKID_AO_UART1] = &uart1_ao, > + [CLKID_AO_UART2] = &uart2_ao, > + [CLKID_AO_IR_BLASTER] = &ir_blaster_ao, > + [CLKID_AO_SAR_ADC] = &saradc_ao, > + [CLKID_AO_CLK81] = &ao_clk81, > + [CLKID_AO_SAR_ADC_SEL] = &axg_saradc_mux, > + [CLKID_AO_SAR_ADC_DIV] = &axg_saradc_div, > + [CLKID_AO_SAR_ADC_CLK] = &axg_saradc_gate, > +}; > + > +static const struct clk_hw_onecell_data axg_aoclk_onecell_data = { > + .hws = { > + [CLKID_AO_REMOTE] = &remote_ao.hw, > + [CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw, > + [CLKID_AO_I2C_SLAVE] = &i2c_slave_ao.hw, > + [CLKID_AO_UART1] = &uart1_ao.hw, > + [CLKID_AO_UART2] = &uart2_ao.hw, > + [CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw, > + [CLKID_AO_SAR_ADC] = &saradc_ao.hw, > + [CLKID_AO_CLK81] = &ao_clk81.hw, > + [CLKID_AO_SAR_ADC_SEL] = &axg_saradc_mux.hw, > + [CLKID_AO_SAR_ADC_DIV] = &axg_saradc_div.hw, > + [CLKID_AO_SAR_ADC_CLK] = &axg_saradc_gate.hw, > + }, > + .num = NR_CLKS, > +}; > + > +static const struct meson_aoclk_data axg_aoclkc_data = { > + .reset_reg = AO_RTI_GEN_CNTL_REG0, > + .num_reset = ARRAY_SIZE(axg_aoclk_reset), > + .reset = axg_aoclk_reset, > + .num_clks = ARRAY_SIZE(axg_aoclk_regmap), > + .clks = axg_aoclk_regmap, > + .hw_data = &axg_aoclk_onecell_data, > +}; > + > +static const struct of_device_id axg_aoclkc_match_table[] = { > + { > + .compatible = "amlogic,meson-axg-aoclkc", > + .data = &axg_aoclkc_data, > + }, > + { } > +}; > + > +static struct platform_driver axg_aoclkc_driver = { > + .probe = meson_aoclkc_probe, > + .driver = { > + .name = "axg-aoclkc", > + .of_match_table = axg_aoclkc_match_table, > + }, > +}; > + > +builtin_platform_driver(axg_aoclkc_driver); > diff --git a/drivers/clk/meson/axg-aoclk.h b/drivers/clk/meson/axg-aoclk.h > new file mode 100644 > index 000000000000..396cd3023064 > --- /dev/null > +++ b/drivers/clk/meson/axg-aoclk.h > @@ -0,0 +1,31 @@ > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ > +/* > + * Copyright (c) 2017 BayLibre, SAS > + * Author: Neil Armstrong <narmstrong@baylibre.com> > + * > + * Copyright (c) 2018 Amlogic, inc. > + * Author: Qiufang Dai <qiufang.dai@amlogic.com> > + */ > + > +#ifndef __AXG_AOCLKC_H > +#define __AXG_AOCLKC_H > + > +#include "meson-aoclk.h" > + > +#define NR_CLKS 11 > +/* AO Configuration Clock registers offsets > + * Register offsets from the data sheet must be multiplied by 4. > + */ > +#define AO_RTI_PWR_CNTL_REG1 0x0C > +#define AO_RTI_PWR_CNTL_REG0 0x10 > +#define AO_RTI_GEN_CNTL_REG0 0x40 > +#define AO_OSCIN_CNTL 0x58 > +#define AO_CRT_CLK_CNTL1 0x68 > +#define AO_SAR_CLK 0x90 > +#define AO_RTC_ALT_CLK_CNTL0 0x94 > +#define AO_RTC_ALT_CLK_CNTL1 0x98 > + > +#include <dt-bindings/clock/axg-aoclkc.h> > +#include <dt-bindings/reset/axg-aoclkc.h> > + > +#endif /* __AXG_AOCLKC_H */ -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 555ab9c6ab64..fa6d1e36cef6 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -5,5 +5,5 @@ obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o meson-aoclk.o gxbb-aoclk.o gxbb-aoclk-32k.o -obj-$(CONFIG_COMMON_CLK_AXG) += axg.o +obj-$(CONFIG_COMMON_CLK_AXG) += axg.o meson-aoclk.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o diff --git a/drivers/clk/meson/axg-aoclk.c b/drivers/clk/meson/axg-aoclk.c new file mode 100644 index 000000000000..cb56d809d3df --- /dev/null +++ b/drivers/clk/meson/axg-aoclk.c @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Amlogic Meson-AXG Clock Controller Driver + * + * Copyright (c) 2016 Baylibre SAS. + * Author: Michael Turquette <mturquette@baylibre.com> + * + * Copyright (c) 2018 Amlogic, inc. + * Author: Qiufang Dai <qiufang.dai@amlogic.com> + */ +#include <linux/clk-provider.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <linux/mfd/syscon.h> +#include <linux/init.h> +#include "clkc.h" +#include "axg-aoclk.h" + +#define AXG_AO_GATE(_name, _bit) \ +static struct clk_regmap _name##_ao = { \ + .data = &(struct clk_regmap_gate_data) { \ + .offset = (AO_RTI_GEN_CNTL_REG0), \ + .bit_idx = (_bit), \ + }, \ + .hw.init = &(struct clk_init_data) { \ + .name = #_name "_ao", \ + .ops = &clk_regmap_gate_ops, \ + .parent_names = (const char *[]){ "clk81" }, \ + .num_parents = 1, \ + .flags = CLK_IGNORE_UNUSED, \ + }, \ +} + +AXG_AO_GATE(remote, 0); +AXG_AO_GATE(i2c_master, 1); +AXG_AO_GATE(i2c_slave, 2); +AXG_AO_GATE(uart1, 3); +AXG_AO_GATE(uart2, 5); +AXG_AO_GATE(ir_blaster, 6); +AXG_AO_GATE(saradc, 7); + +static struct clk_regmap ao_clk81 = { + .data = &(struct clk_regmap_mux_data) { + .offset = AO_RTI_PWR_CNTL_REG0, + .mask = 0x1, + .shift = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "ao_clk81", + .ops = &clk_regmap_mux_ro_ops, + .parent_names = (const char *[]){ "clk81", "ao_alt_xtal"}, + .num_parents = 2, + }, +}; + +static struct clk_regmap axg_saradc_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = AO_SAR_CLK, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "axg_saradc_mux", + .ops = &clk_regmap_mux_ops, + .parent_names = (const char *[]){ "xtal", "ao_clk81" }, + .num_parents = 2, + }, +}; + +static struct clk_regmap axg_saradc_div = { + .data = &(struct clk_regmap_div_data) { + .offset = AO_SAR_CLK, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "axg_saradc_div", + .ops = &clk_regmap_divider_ops, + .parent_names = (const char *[]){ "axg_saradc_mux" }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap axg_saradc_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = AO_SAR_CLK, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "axg_saradc_gate", + .ops = &clk_regmap_gate_ops, + .parent_names = (const char *[]){ "axg_saradc_div" }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const unsigned int axg_aoclk_reset[] = { + [RESET_AO_REMOTE] = 16, + [RESET_AO_I2C_MASTER] = 18, + [RESET_AO_I2C_SLAVE] = 19, + [RESET_AO_UART1] = 17, + [RESET_AO_UART2] = 22, + [RESET_AO_IR_BLASTER] = 23, +}; + +static struct clk_regmap *axg_aoclk_regmap[] = { + [CLKID_AO_REMOTE] = &remote_ao, + [CLKID_AO_I2C_MASTER] = &i2c_master_ao, + [CLKID_AO_I2C_SLAVE] = &i2c_slave_ao, + [CLKID_AO_UART1] = &uart1_ao, + [CLKID_AO_UART2] = &uart2_ao, + [CLKID_AO_IR_BLASTER] = &ir_blaster_ao, + [CLKID_AO_SAR_ADC] = &saradc_ao, + [CLKID_AO_CLK81] = &ao_clk81, + [CLKID_AO_SAR_ADC_SEL] = &axg_saradc_mux, + [CLKID_AO_SAR_ADC_DIV] = &axg_saradc_div, + [CLKID_AO_SAR_ADC_CLK] = &axg_saradc_gate, +}; + +static const struct clk_hw_onecell_data axg_aoclk_onecell_data = { + .hws = { + [CLKID_AO_REMOTE] = &remote_ao.hw, + [CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw, + [CLKID_AO_I2C_SLAVE] = &i2c_slave_ao.hw, + [CLKID_AO_UART1] = &uart1_ao.hw, + [CLKID_AO_UART2] = &uart2_ao.hw, + [CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw, + [CLKID_AO_SAR_ADC] = &saradc_ao.hw, + [CLKID_AO_CLK81] = &ao_clk81.hw, + [CLKID_AO_SAR_ADC_SEL] = &axg_saradc_mux.hw, + [CLKID_AO_SAR_ADC_DIV] = &axg_saradc_div.hw, + [CLKID_AO_SAR_ADC_CLK] = &axg_saradc_gate.hw, + }, + .num = NR_CLKS, +}; + +static const struct meson_aoclk_data axg_aoclkc_data = { + .reset_reg = AO_RTI_GEN_CNTL_REG0, + .num_reset = ARRAY_SIZE(axg_aoclk_reset), + .reset = axg_aoclk_reset, + .num_clks = ARRAY_SIZE(axg_aoclk_regmap), + .clks = axg_aoclk_regmap, + .hw_data = &axg_aoclk_onecell_data, +}; + +static const struct of_device_id axg_aoclkc_match_table[] = { + { + .compatible = "amlogic,meson-axg-aoclkc", + .data = &axg_aoclkc_data, + }, + { } +}; + +static struct platform_driver axg_aoclkc_driver = { + .probe = meson_aoclkc_probe, + .driver = { + .name = "axg-aoclkc", + .of_match_table = axg_aoclkc_match_table, + }, +}; + +builtin_platform_driver(axg_aoclkc_driver); diff --git a/drivers/clk/meson/axg-aoclk.h b/drivers/clk/meson/axg-aoclk.h new file mode 100644 index 000000000000..396cd3023064 --- /dev/null +++ b/drivers/clk/meson/axg-aoclk.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2017 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Copyright (c) 2018 Amlogic, inc. + * Author: Qiufang Dai <qiufang.dai@amlogic.com> + */ + +#ifndef __AXG_AOCLKC_H +#define __AXG_AOCLKC_H + +#include "meson-aoclk.h" + +#define NR_CLKS 11 +/* AO Configuration Clock registers offsets + * Register offsets from the data sheet must be multiplied by 4. + */ +#define AO_RTI_PWR_CNTL_REG1 0x0C +#define AO_RTI_PWR_CNTL_REG0 0x10 +#define AO_RTI_GEN_CNTL_REG0 0x40 +#define AO_OSCIN_CNTL 0x58 +#define AO_CRT_CLK_CNTL1 0x68 +#define AO_SAR_CLK 0x90 +#define AO_RTC_ALT_CLK_CNTL0 0x94 +#define AO_RTC_ALT_CLK_CNTL1 0x98 + +#include <dt-bindings/clock/axg-aoclkc.h> +#include <dt-bindings/reset/axg-aoclkc.h> + +#endif /* __AXG_AOCLKC_H */