| Message ID | 20180409143749.71197-3-yixun.lan@amlogic.com (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
On Mon, 2018-04-09 at 22:37 +0800, Yixun Lan wrote: > We try to refactor the common code into one dedicated file, > while preparing to add new Meson-AXG aoclk driver, this would > help us to better share the code by all aoclk drivers. > > Suggested-by: Jerome Brunet <jbrunet@baylibre.com> > Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> > --- > drivers/clk/meson/Kconfig | 7 ++++ > drivers/clk/meson/Makefile | 1 + > drivers/clk/meson/gxbb-aoclk.c | 91 ++++++++++++++--------------------------- > drivers/clk/meson/gxbb-aoclk.h | 7 ++++ > drivers/clk/meson/meson-aoclk.c | 82 +++++++++++++++++++++++++++++++++++++ > drivers/clk/meson/meson-aoclk.h | 35 ++++++++++++++++ > 6 files changed, 163 insertions(+), 60 deletions(-) > create mode 100644 drivers/clk/meson/meson-aoclk.c > create mode 100644 drivers/clk/meson/meson-aoclk.h > > diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig > index d5cbec522aec..fddc7ec7b820 100644 > --- a/drivers/clk/meson/Kconfig > +++ b/drivers/clk/meson/Kconfig > @@ -3,6 +3,12 @@ config COMMON_CLK_AMLOGIC > depends on OF > depends on ARCH_MESON || COMPILE_TEST > > +config COMMON_CLK_MESON_AO > + bool > + depends on OF > + depends on ARCH_MESON || COMPILE_TEST > + select COMMON_CLK_REGMAP_MESON > + > config COMMON_CLK_REGMAP_MESON > bool > select REGMAP > @@ -21,6 +27,7 @@ config COMMON_CLK_GXBB > bool > depends on COMMON_CLK_AMLOGIC > select RESET_CONTROLLER > + select COMMON_CLK_MESON_AO > select COMMON_CLK_REGMAP_MESON > select MFD_SYSCON > help > diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile > index ffee82e60b7a..0a8df284f4e7 100644 > --- a/drivers/clk/meson/Makefile > +++ b/drivers/clk/meson/Makefile > @@ -3,6 +3,7 @@ > # > > obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o > +obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o > obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o > obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o > obj-$(CONFIG_COMMON_CLK_AXG) += axg.o > diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c > index eebb580b9e0f..f2e0640a7f74 100644 > --- a/drivers/clk/meson/gxbb-aoclk.c > +++ b/drivers/clk/meson/gxbb-aoclk.c > @@ -52,39 +52,13 @@ > * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE > * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > */ > -#include <linux/clk-provider.h> > -#include <linux/of_address.h> > #include <linux/platform_device.h> > #include <linux/reset-controller.h> > #include <linux/mfd/syscon.h> > -#include <linux/regmap.h> > #include <linux/init.h> > -#include <linux/delay.h> > -#include <dt-bindings/clock/gxbb-aoclkc.h> > -#include <dt-bindings/reset/gxbb-aoclkc.h> > #include "clk-regmap.h" > #include "gxbb-aoclk.h" > > -struct gxbb_aoclk_reset_controller { > - struct reset_controller_dev reset; > - unsigned int *data; > - struct regmap *regmap; > -}; > - > -static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev, > - unsigned long id) > -{ > - struct gxbb_aoclk_reset_controller *reset = > - container_of(rcdev, struct gxbb_aoclk_reset_controller, reset); > - > - return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0, > - BIT(reset->data[id])); > -} > - > -static const struct reset_control_ops gxbb_aoclk_reset_ops = { > - .reset = gxbb_aoclk_do_reset, > -}; > - > #define GXBB_AO_GATE(_name, _bit) \ > static struct clk_regmap _name##_ao = { \ > .data = &(struct clk_regmap_gate_data) { \ > @@ -117,7 +91,7 @@ static struct aoclk_cec_32k cec_32k_ao = { > }, > }; > > -static unsigned int gxbb_aoclk_reset[] = { > +static const unsigned int gxbb_aoclk_reset[] = { > [RESET_AO_REMOTE] = 16, > [RESET_AO_I2C_MASTER] = 18, > [RESET_AO_I2C_SLAVE] = 19, > @@ -135,7 +109,7 @@ static struct clk_regmap *gxbb_aoclk_gate[] = { > [CLKID_AO_IR_BLASTER] = &ir_blaster_ao, > }; > > -static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { > +static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { > .hws = { > [CLKID_AO_REMOTE] = &remote_ao.hw, > [CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw, > @@ -145,58 +119,55 @@ static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { > [CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw, > [CLKID_AO_CEC_32K] = &cec_32k_ao.hw, > }, > - .num = 7, > + .num = NR_CLKS, > }; > > -static int gxbb_aoclkc_probe(struct platform_device *pdev) > +static int gxbb_register_cec_ao_32k(struct platform_device *pdev) > { > - struct gxbb_aoclk_reset_controller *rstc; > struct device *dev = &pdev->dev; > struct regmap *regmap; > - int ret, clkid; > - > - rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL); > - if (!rstc) > - return -ENOMEM; > + int ret; > > regmap = syscon_node_to_regmap(of_get_parent(dev->of_node)); > if (IS_ERR(regmap)) { > dev_err(dev, "failed to get regmap\n"); > - return -ENODEV; > - } > - > - /* Reset Controller */ > - rstc->regmap = regmap; > - rstc->data = gxbb_aoclk_reset; > - rstc->reset.ops = &gxbb_aoclk_reset_ops; > - rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset); > - rstc->reset.of_node = dev->of_node; > - ret = devm_reset_controller_register(dev, &rstc->reset); > - > - /* > - * Populate regmap and register all clks > - */ > - for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) { > - gxbb_aoclk_gate[clkid]->map = regmap; > - > - ret = devm_clk_hw_register(dev, > - gxbb_aoclk_onecell_data.hws[clkid]); > - if (ret) > - return ret; > + return PTR_ERR(regmap); > } > > /* Specific clocks */ > cec_32k_ao.regmap = regmap; > ret = devm_clk_hw_register(dev, &cec_32k_ao.hw); > + if (ret) { > + dev_err(&pdev->dev, "clk cec_32k_ao register failed.\n"); > + return ret; > + } > + > + return 0; > +} > + > +static const struct meson_aoclk_data gxbb_aoclkc_data = { > + .reset_reg = AO_RTI_GEN_CNTL_REG0, > + .num_reset = ARRAY_SIZE(gxbb_aoclk_reset), > + .reset = gxbb_aoclk_reset, > + .num_clks = ARRAY_SIZE(gxbb_aoclk_gate), > + .clks = gxbb_aoclk_gate, > + .hw_data = &gxbb_aoclk_onecell_data, > +}; > + > +static int gxbb_aoclkc_probe(struct platform_device *pdev) > +{ > + int ret = gxbb_register_cec_ao_32k(pdev); > if (ret) > return ret; > > - return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, > - &gxbb_aoclk_onecell_data); > + return meson_aoclkc_probe(pdev); > } > > static const struct of_device_id gxbb_aoclkc_match_table[] = { > - { .compatible = "amlogic,meson-gx-aoclkc" }, > + { > + .compatible = "amlogic,meson-gx-aoclkc", > + .data = &gxbb_aoclkc_data, > + }, > { } > }; > > diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h > index badc4c22b4ee..b031f1a0213e 100644 > --- a/drivers/clk/meson/gxbb-aoclk.h > +++ b/drivers/clk/meson/gxbb-aoclk.h > @@ -8,6 +8,10 @@ > #ifndef __GXBB_AOCLKC_H > #define __GXBB_AOCLKC_H > > +#include "meson-aoclk.h" > + > +#define NR_CLKS 7 > + > /* AO Configuration Clock registers offsets */ > #define AO_RTI_PWR_CNTL_REG1 0x0c > #define AO_RTI_PWR_CNTL_REG0 0x10 > @@ -26,4 +30,7 @@ struct aoclk_cec_32k { > > extern const struct clk_ops meson_aoclk_cec_32k_ops; > > +#include <dt-bindings/clock/gxbb-aoclkc.h> > +#include <dt-bindings/reset/gxbb-aoclkc.h> > + > #endif /* __GXBB_AOCLKC_H */ > diff --git a/drivers/clk/meson/meson-aoclk.c b/drivers/clk/meson/meson-aoclk.c > new file mode 100644 > index 000000000000..74338ef0a62b > --- /dev/null > +++ b/drivers/clk/meson/meson-aoclk.c > @@ -0,0 +1,82 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Amlogic Meson-AXG Clock Controller Driver > + * > + * Copyright (c) 2016 BayLibre, SAS. > + * Author: Neil Armstrong <narmstrong@baylibre.com> > + * > + * Copyright (c) 2018 Amlogic, inc. > + * Author: Qiufang Dai <qiufang.dai@amlogic.com> > + * Author: Yixun Lan <yixun.lan@amlogic.com> > + */ > + > +#include <linux/platform_device.h> > +#include <linux/reset-controller.h> > +#include <linux/mfd/syscon.h> > +#include <linux/init.h> > +#include <linux/of_device.h> > +#include "clk-regmap.h" > +#include "meson-aoclk.h" > + > +static int meson_aoclk_do_reset(struct reset_controller_dev *rcdev, > + unsigned long id) > +{ > + struct meson_aoclk_reset_controller *rstc = > + container_of(rcdev, struct meson_aoclk_reset_controller, reset); > + > + return regmap_write(rstc->regmap, rstc->data->reset_reg, > + BIT(rstc->data->reset[id])); > +} > + > +static const struct reset_control_ops meson_aoclk_reset_ops = { > + .reset = meson_aoclk_do_reset, > +}; > + > +int meson_aoclkc_probe(struct platform_device *pdev) > +{ > + struct meson_aoclk_reset_controller *rstc; > + struct meson_aoclk_data *data; > + struct device *dev = &pdev->dev; > + struct regmap *regmap; > + int ret, clkid; > + > + data = (struct meson_aoclk_data *) of_device_get_match_data(dev); > + if (!data) > + return -ENODEV; > + > + rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL); > + if (!rstc) > + return -ENOMEM; > + > + regmap = syscon_node_to_regmap(of_get_parent(dev->of_node)); > + if (IS_ERR(regmap)) { > + dev_err(dev, "failed to get regmap\n"); > + return PTR_ERR(regmap); > + } > + > + /* Reset Controller */ > + rstc->data = data; > + rstc->regmap = regmap; > + rstc->reset.ops = &meson_aoclk_reset_ops; > + rstc->reset.nr_resets = data->num_reset, > + rstc->reset.of_node = dev->of_node; > + ret = devm_reset_controller_register(dev, &rstc->reset); > + if (ret) { > + dev_err(dev, "failed to register reset controller\n"); > + return ret; > + } > + > + /* > + * Populate regmap and register all clks > + */ > + for (clkid = 0; clkid < data->num_clks; clkid++) { > + data->clks[clkid]->map = regmap; > + > + ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]); > + if (ret) > + return ret; > + } > + > + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, > + (void *) data->hw_data); > +} Missing new line here. Please run checkpatch and pay attention to git warnings about whitespace errors. > diff --git a/drivers/clk/meson/meson-aoclk.h b/drivers/clk/meson/meson-aoclk.h > new file mode 100644 > index 000000000000..ec59e027dd37 > --- /dev/null > +++ b/drivers/clk/meson/meson-aoclk.h > @@ -0,0 +1,35 @@ > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ > +/* > + * Copyright (c) 2017 BayLibre, SAS > + * Author: Neil Armstrong <narmstrong@baylibre.com> > + * > + * Copyright (c) 2018 Amlogic, inc. > + * Author: Qiufang Dai <qiufang.dai@amlogic.com> > + * Author: Yixun Lan <yixun.lan@amlogic.com> > + */ > + > +#ifndef __MESON_AOCLK_H__ > +#define __MESON_AOCLK_H__ > + > +#include <linux/platform_device.h> > +#include <linux/reset-controller.h> > +#include "clk-regmap.h" > + > +struct meson_aoclk_data { > + const unsigned int reset_reg; > + const int num_reset; > + const unsigned int *reset; > + int num_clks; > + struct clk_regmap **clks; > + const struct clk_hw_onecell_data *hw_data; > +}; > + > +struct meson_aoclk_reset_controller { > + struct reset_controller_dev reset; > + const struct meson_aoclk_data *data; > + struct regmap *regmap; > +}; > + > +int meson_aoclkc_probe(struct platform_device *pdev); > +#endif > + -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 2018-04-09 at 22:37 +0800, Yixun Lan wrote: > We try to refactor the common code into one dedicated file, > while preparing to add new Meson-AXG aoclk driver, this would > help us to better share the code by all aoclk drivers. > > Suggested-by: Jerome Brunet <jbrunet@baylibre.com> > Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> > --- > drivers/clk/meson/Kconfig | 7 ++++ > drivers/clk/meson/Makefile | 1 + > drivers/clk/meson/gxbb-aoclk.c | 91 ++++++++++++++--------------------------- > drivers/clk/meson/gxbb-aoclk.h | 7 ++++ > drivers/clk/meson/meson-aoclk.c | 82 +++++++++++++++++++++++++++++++++++++ > drivers/clk/meson/meson-aoclk.h | 35 ++++++++++++++++ > 6 files changed, 163 insertions(+), 60 deletions(-) > create mode 100644 drivers/clk/meson/meson-aoclk.c > create mode 100644 drivers/clk/meson/meson-aoclk.h > > diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig > index d5cbec522aec..fddc7ec7b820 100644 > --- a/drivers/clk/meson/Kconfig > +++ b/drivers/clk/meson/Kconfig > @@ -3,6 +3,12 @@ config COMMON_CLK_AMLOGIC > depends on OF > depends on ARCH_MESON || COMPILE_TEST > > +config COMMON_CLK_MESON_AO > + bool > + depends on OF > + depends on ARCH_MESON || COMPILE_TEST > + select COMMON_CLK_REGMAP_MESON > + > config COMMON_CLK_REGMAP_MESON > bool > select REGMAP > @@ -21,6 +27,7 @@ config COMMON_CLK_GXBB > bool > depends on COMMON_CLK_AMLOGIC > select RESET_CONTROLLER > + select COMMON_CLK_MESON_AO > select COMMON_CLK_REGMAP_MESON > select MFD_SYSCON > help > diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile > index ffee82e60b7a..0a8df284f4e7 100644 > --- a/drivers/clk/meson/Makefile > +++ b/drivers/clk/meson/Makefile > @@ -3,6 +3,7 @@ > # > > obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o > +obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o > obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o > obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o > obj-$(CONFIG_COMMON_CLK_AXG) += axg.o > diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c > index eebb580b9e0f..f2e0640a7f74 100644 > --- a/drivers/clk/meson/gxbb-aoclk.c > +++ b/drivers/clk/meson/gxbb-aoclk.c > @@ -52,39 +52,13 @@ > * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE > * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > */ > -#include <linux/clk-provider.h> > -#include <linux/of_address.h> > #include <linux/platform_device.h> > #include <linux/reset-controller.h> Not required anymore > #include <linux/mfd/syscon.h> > -#include <linux/regmap.h> > #include <linux/init.h> Not required > -#include <linux/delay.h> > -#include <dt-bindings/clock/gxbb-aoclkc.h> > -#include <dt-bindings/reset/gxbb-aoclkc.h> Please keep these 2 here > #include "clk-regmap.h" > #include "gxbb-aoclk.h" > > -struct gxbb_aoclk_reset_controller { > - struct reset_controller_dev reset; > - unsigned int *data; > - struct regmap *regmap; > -}; > - > -static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev, > - unsigned long id) > -{ > - struct gxbb_aoclk_reset_controller *reset = > - container_of(rcdev, struct gxbb_aoclk_reset_controller, reset); > - > - return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0, > - BIT(reset->data[id])); > -} > - > -static const struct reset_control_ops gxbb_aoclk_reset_ops = { > - .reset = gxbb_aoclk_do_reset, > -}; > - > #define GXBB_AO_GATE(_name, _bit) \ > static struct clk_regmap _name##_ao = { \ > .data = &(struct clk_regmap_gate_data) { \ > @@ -117,7 +91,7 @@ static struct aoclk_cec_32k cec_32k_ao = { > }, > }; > > -static unsigned int gxbb_aoclk_reset[] = { > +static const unsigned int gxbb_aoclk_reset[] = { > [RESET_AO_REMOTE] = 16, > [RESET_AO_I2C_MASTER] = 18, > [RESET_AO_I2C_SLAVE] = 19, > @@ -135,7 +109,7 @@ static struct clk_regmap *gxbb_aoclk_gate[] = { > [CLKID_AO_IR_BLASTER] = &ir_blaster_ao, > }; > > -static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { > +static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { > .hws = { > [CLKID_AO_REMOTE] = &remote_ao.hw, > [CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw, > @@ -145,58 +119,55 @@ static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { > [CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw, > [CLKID_AO_CEC_32K] = &cec_32k_ao.hw, > }, > - .num = 7, > + .num = NR_CLKS, > }; > > -static int gxbb_aoclkc_probe(struct platform_device *pdev) > +static int gxbb_register_cec_ao_32k(struct platform_device *pdev) > { > - struct gxbb_aoclk_reset_controller *rstc; > struct device *dev = &pdev->dev; > struct regmap *regmap; > - int ret, clkid; > - > - rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL); > - if (!rstc) > - return -ENOMEM; > + int ret; > > regmap = syscon_node_to_regmap(of_get_parent(dev->of_node)); > if (IS_ERR(regmap)) { > dev_err(dev, "failed to get regmap\n"); > - return -ENODEV; > - } > - > - /* Reset Controller */ > - rstc->regmap = regmap; > - rstc->data = gxbb_aoclk_reset; > - rstc->reset.ops = &gxbb_aoclk_reset_ops; > - rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset); > - rstc->reset.of_node = dev->of_node; > - ret = devm_reset_controller_register(dev, &rstc->reset); > - > - /* > - * Populate regmap and register all clks > - */ > - for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) { > - gxbb_aoclk_gate[clkid]->map = regmap; > - > - ret = devm_clk_hw_register(dev, > - gxbb_aoclk_onecell_data.hws[clkid]); > - if (ret) > - return ret; > + return PTR_ERR(regmap); > } > > /* Specific clocks */ > cec_32k_ao.regmap = regmap; > ret = devm_clk_hw_register(dev, &cec_32k_ao.hw); > + if (ret) { > + dev_err(&pdev->dev, "clk cec_32k_ao register failed.\n"); > + return ret; > + } > + > + return 0; > +} > + > +static const struct meson_aoclk_data gxbb_aoclkc_data = { > + .reset_reg = AO_RTI_GEN_CNTL_REG0, > + .num_reset = ARRAY_SIZE(gxbb_aoclk_reset), > + .reset = gxbb_aoclk_reset, > + .num_clks = ARRAY_SIZE(gxbb_aoclk_gate), > + .clks = gxbb_aoclk_gate, > + .hw_data = &gxbb_aoclk_onecell_data, > +}; > + > +static int gxbb_aoclkc_probe(struct platform_device *pdev) > +{ > + int ret = gxbb_register_cec_ao_32k(pdev); > if (ret) > return ret; > > - return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, > - &gxbb_aoclk_onecell_data); > + return meson_aoclkc_probe(pdev); > } > > static const struct of_device_id gxbb_aoclkc_match_table[] = { > - { .compatible = "amlogic,meson-gx-aoclkc" }, > + { > + .compatible = "amlogic,meson-gx-aoclkc", > + .data = &gxbb_aoclkc_data, > + }, > { } > }; > > diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h > index badc4c22b4ee..b031f1a0213e 100644 > --- a/drivers/clk/meson/gxbb-aoclk.h > +++ b/drivers/clk/meson/gxbb-aoclk.h > @@ -8,6 +8,10 @@ > #ifndef __GXBB_AOCLKC_H > #define __GXBB_AOCLKC_H > > +#include "meson-aoclk.h" You are not using any of the structure defined in meson-aoclk.h in here. Why do you include this here ? > + > +#define NR_CLKS 7 > + > /* AO Configuration Clock registers offsets */ > #define AO_RTI_PWR_CNTL_REG1 0x0c > #define AO_RTI_PWR_CNTL_REG0 0x10 > @@ -26,4 +30,7 @@ struct aoclk_cec_32k { > > extern const struct clk_ops meson_aoclk_cec_32k_ops; > > +#include <dt-bindings/clock/gxbb-aoclkc.h> > +#include <dt-bindings/reset/gxbb-aoclkc.h> Please drop this. > + > #endif /* __GXBB_AOCLKC_H */ > diff --git a/drivers/clk/meson/meson-aoclk.c b/drivers/clk/meson/meson-aoclk.c > new file mode 100644 > index 000000000000..74338ef0a62b > --- /dev/null > +++ b/drivers/clk/meson/meson-aoclk.c > @@ -0,0 +1,82 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Amlogic Meson-AXG Clock Controller Driver > + * > + * Copyright (c) 2016 BayLibre, SAS. > + * Author: Neil Armstrong <narmstrong@baylibre.com> > + * > + * Copyright (c) 2018 Amlogic, inc. > + * Author: Qiufang Dai <qiufang.dai@amlogic.com> > + * Author: Yixun Lan <yixun.lan@amlogic.com> > + */ > + > +#include <linux/platform_device.h> > +#include <linux/reset-controller.h> > +#include <linux/mfd/syscon.h> > +#include <linux/init.h> Not required > +#include <linux/of_device.h> > +#include "clk-regmap.h" > +#include "meson-aoclk.h" > + > +static int meson_aoclk_do_reset(struct reset_controller_dev *rcdev, > + unsigned long id) > +{ > + struct meson_aoclk_reset_controller *rstc = > + container_of(rcdev, struct meson_aoclk_reset_controller, reset); > + > + return regmap_write(rstc->regmap, rstc->data->reset_reg, > + BIT(rstc->data->reset[id])); > +} > + > +static const struct reset_control_ops meson_aoclk_reset_ops = { > + .reset = meson_aoclk_do_reset, > +}; > + > +int meson_aoclkc_probe(struct platform_device *pdev) > +{ > + struct meson_aoclk_reset_controller *rstc; > + struct meson_aoclk_data *data; > + struct device *dev = &pdev->dev; > + struct regmap *regmap; > + int ret, clkid; > + > + data = (struct meson_aoclk_data *) of_device_get_match_data(dev); > + if (!data) > + return -ENODEV; > + > + rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL); > + if (!rstc) > + return -ENOMEM; > + > + regmap = syscon_node_to_regmap(of_get_parent(dev->of_node)); > + if (IS_ERR(regmap)) { > + dev_err(dev, "failed to get regmap\n"); > + return PTR_ERR(regmap); > + } > + > + /* Reset Controller */ > + rstc->data = data; > + rstc->regmap = regmap; > + rstc->reset.ops = &meson_aoclk_reset_ops; > + rstc->reset.nr_resets = data->num_reset, > + rstc->reset.of_node = dev->of_node; > + ret = devm_reset_controller_register(dev, &rstc->reset); > + if (ret) { > + dev_err(dev, "failed to register reset controller\n"); > + return ret; > + } > + > + /* > + * Populate regmap and register all clks > + */ > + for (clkid = 0; clkid < data->num_clks; clkid++) { > + data->clks[clkid]->map = regmap; > + > + ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]); > + if (ret) > + return ret; > + } > + > + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, > + (void *) data->hw_data); > +} > diff --git a/drivers/clk/meson/meson-aoclk.h b/drivers/clk/meson/meson-aoclk.h > new file mode 100644 > index 000000000000..ec59e027dd37 > --- /dev/null > +++ b/drivers/clk/meson/meson-aoclk.h > @@ -0,0 +1,35 @@ > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ > +/* > + * Copyright (c) 2017 BayLibre, SAS > + * Author: Neil Armstrong <narmstrong@baylibre.com> > + * > + * Copyright (c) 2018 Amlogic, inc. > + * Author: Qiufang Dai <qiufang.dai@amlogic.com> > + * Author: Yixun Lan <yixun.lan@amlogic.com> > + */ > + > +#ifndef __MESON_AOCLK_H__ > +#define __MESON_AOCLK_H__ > + > +#include <linux/platform_device.h> > +#include <linux/reset-controller.h> > +#include "clk-regmap.h" > + > +struct meson_aoclk_data { > + const unsigned int reset_reg; > + const int num_reset; > + const unsigned int *reset; > + int num_clks; > + struct clk_regmap **clks; > + const struct clk_hw_onecell_data *hw_data; > +}; > + > +struct meson_aoclk_reset_controller { > + struct reset_controller_dev reset; > + const struct meson_aoclk_data *data; > + struct regmap *regmap; > +}; > + > +int meson_aoclkc_probe(struct platform_device *pdev); > +#endif > + -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jerome On 04/16/18 18:38, Jerome Brunet wrote: >> + */ >> + for (clkid = 0; clkid < data->num_clks; clkid++) { >> + data->clks[clkid]->map = regmap; >> + >> + ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]); >> + if (ret) >> + return ret; >> + } >> + >> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, >> + (void *) data->hw_data); >> +} > Missing new line here. Please run checkpatch and pay attention to git warnings > about whitespace errors. > I think we actually need to avoid this extra new line, or what's the benefits with new line? and besides， I didn't see any complaint from checkpatch.pl .. ./scripts/checkpatch.pl 0002-clk-meson-aoclk-refactor-common-code-into-dedicated-.patch WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #235: new file mode 100644 total: 0 errors, 1 warnings, 302 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. 0002-clk-meson-aoclk-refactor-common-code-into-dedicated-.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Yixun -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi jerome On 04/16/18 19:34, Jerome Brunet wrote: > On Mon, 2018-04-09 at 22:37 +0800, Yixun Lan wrote: >> We try to refactor the common code into one dedicated file, >> while preparing to add new Meson-AXG aoclk driver, this would >> help us to better share the code by all aoclk drivers. >> >> Suggested-by: Jerome Brunet <jbrunet@baylibre.com> >> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> >> --- >> drivers/clk/meson/Kconfig | 7 ++++ >> drivers/clk/meson/Makefile | 1 + >> drivers/clk/meson/gxbb-aoclk.c | 91 ++++++++++++++--------------------------- >> drivers/clk/meson/gxbb-aoclk.h | 7 ++++ >> drivers/clk/meson/meson-aoclk.c | 82 +++++++++++++++++++++++++++++++++++++ >> drivers/clk/meson/meson-aoclk.h | 35 ++++++++++++++++ >> 6 files changed, 163 insertions(+), 60 deletions(-) >> create mode 100644 drivers/clk/meson/meson-aoclk.c >> create mode 100644 drivers/clk/meson/meson-aoclk.h >> >> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig >> index d5cbec522aec..fddc7ec7b820 100644 >> --- a/drivers/clk/meson/Kconfig >> +++ b/drivers/clk/meson/Kconfig >> @@ -3,6 +3,12 @@ config COMMON_CLK_AMLOGIC >> depends on OF >> depends on ARCH_MESON || COMPILE_TEST >> >> +config COMMON_CLK_MESON_AO >> + bool >> + depends on OF >> + depends on ARCH_MESON || COMPILE_TEST >> + select COMMON_CLK_REGMAP_MESON >> + >> config COMMON_CLK_REGMAP_MESON >> bool >> select REGMAP >> @@ -21,6 +27,7 @@ config COMMON_CLK_GXBB >> bool >> depends on COMMON_CLK_AMLOGIC >> select RESET_CONTROLLER >> + select COMMON_CLK_MESON_AO >> select COMMON_CLK_REGMAP_MESON >> select MFD_SYSCON >> help >> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile >> index ffee82e60b7a..0a8df284f4e7 100644 >> --- a/drivers/clk/meson/Makefile >> +++ b/drivers/clk/meson/Makefile >> @@ -3,6 +3,7 @@ >> # >> >> obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o >> +obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o >> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o >> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o >> obj-$(CONFIG_COMMON_CLK_AXG) += axg.o >> diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c >> index eebb580b9e0f..f2e0640a7f74 100644 >> --- a/drivers/clk/meson/gxbb-aoclk.c >> +++ b/drivers/clk/meson/gxbb-aoclk.c >> @@ -52,39 +52,13 @@ >> * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE >> * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. >> */ >> -#include <linux/clk-provider.h> >> -#include <linux/of_address.h> >> #include <linux/platform_device.h> > >> #include <linux/reset-controller.h> > Not required anymore > will remove >> #include <linux/mfd/syscon.h> >> -#include <linux/regmap.h> >> #include <linux/init.h> > Not required > will remove >> -#include <linux/delay.h> > >> -#include <dt-bindings/clock/gxbb-aoclkc.h> >> -#include <dt-bindings/reset/gxbb-aoclkc.h> > Please keep these 2 here > see comments below >> #include "clk-regmap.h" >> #include "gxbb-aoclk.h" >> >> -struct gxbb_aoclk_reset_controller { >> - struct reset_controller_dev reset; >> - unsigned int *data; >> - struct regmap *regmap; >> -}; >> - >> -static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev, >> - unsigned long id) >> -{ >> - struct gxbb_aoclk_reset_controller *reset = >> - container_of(rcdev, struct gxbb_aoclk_reset_controller, reset); >> - >> - return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0, >> - BIT(reset->data[id])); >> -} >> - >> -static const struct reset_control_ops gxbb_aoclk_reset_ops = { >> - .reset = gxbb_aoclk_do_reset, >> -}; >> - >> #define GXBB_AO_GATE(_name, _bit) \ >> static struct clk_regmap _name##_ao = { \ >> .data = &(struct clk_regmap_gate_data) { \ >> @@ -117,7 +91,7 @@ static struct aoclk_cec_32k cec_32k_ao = { >> }, >> }; >> >> -static unsigned int gxbb_aoclk_reset[] = { >> +static const unsigned int gxbb_aoclk_reset[] = { >> [RESET_AO_REMOTE] = 16, >> [RESET_AO_I2C_MASTER] = 18, >> [RESET_AO_I2C_SLAVE] = 19, >> @@ -135,7 +109,7 @@ static struct clk_regmap *gxbb_aoclk_gate[] = { >> [CLKID_AO_IR_BLASTER] = &ir_blaster_ao, >> }; >> >> -static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { >> +static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { >> .hws = { >> [CLKID_AO_REMOTE] = &remote_ao.hw, >> [CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw, >> @@ -145,58 +119,55 @@ static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { >> [CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw, >> [CLKID_AO_CEC_32K] = &cec_32k_ao.hw, >> }, >> - .num = 7, >> + .num = NR_CLKS, >> }; >> >> -static int gxbb_aoclkc_probe(struct platform_device *pdev) >> +static int gxbb_register_cec_ao_32k(struct platform_device *pdev) >> { >> - struct gxbb_aoclk_reset_controller *rstc; >> struct device *dev = &pdev->dev; >> struct regmap *regmap; >> - int ret, clkid; >> - >> - rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL); >> - if (!rstc) >> - return -ENOMEM; >> + int ret; >> >> regmap = syscon_node_to_regmap(of_get_parent(dev->of_node)); >> if (IS_ERR(regmap)) { >> dev_err(dev, "failed to get regmap\n"); >> - return -ENODEV; >> - } >> - >> - /* Reset Controller */ >> - rstc->regmap = regmap; >> - rstc->data = gxbb_aoclk_reset; >> - rstc->reset.ops = &gxbb_aoclk_reset_ops; >> - rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset); >> - rstc->reset.of_node = dev->of_node; >> - ret = devm_reset_controller_register(dev, &rstc->reset); >> - >> - /* >> - * Populate regmap and register all clks >> - */ >> - for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) { >> - gxbb_aoclk_gate[clkid]->map = regmap; >> - >> - ret = devm_clk_hw_register(dev, >> - gxbb_aoclk_onecell_data.hws[clkid]); >> - if (ret) >> - return ret; >> + return PTR_ERR(regmap); >> } >> >> /* Specific clocks */ >> cec_32k_ao.regmap = regmap; >> ret = devm_clk_hw_register(dev, &cec_32k_ao.hw); >> + if (ret) { >> + dev_err(&pdev->dev, "clk cec_32k_ao register failed.\n"); >> + return ret; >> + } >> + >> + return 0; >> +} >> + >> +static const struct meson_aoclk_data gxbb_aoclkc_data = { >> + .reset_reg = AO_RTI_GEN_CNTL_REG0, >> + .num_reset = ARRAY_SIZE(gxbb_aoclk_reset), >> + .reset = gxbb_aoclk_reset, >> + .num_clks = ARRAY_SIZE(gxbb_aoclk_gate), >> + .clks = gxbb_aoclk_gate, >> + .hw_data = &gxbb_aoclk_onecell_data, >> +}; >> + >> +static int gxbb_aoclkc_probe(struct platform_device *pdev) >> +{ >> + int ret = gxbb_register_cec_ao_32k(pdev); >> if (ret) >> return ret; >> >> - return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, >> - &gxbb_aoclk_onecell_data); >> + return meson_aoclkc_probe(pdev); >> } >> >> static const struct of_device_id gxbb_aoclkc_match_table[] = { >> - { .compatible = "amlogic,meson-gx-aoclkc" }, >> + { >> + .compatible = "amlogic,meson-gx-aoclkc", >> + .data = &gxbb_aoclkc_data, >> + }, >> { } >> }; >> >> diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h >> index badc4c22b4ee..b031f1a0213e 100644 >> --- a/drivers/clk/meson/gxbb-aoclk.h >> +++ b/drivers/clk/meson/gxbb-aoclk.h >> @@ -8,6 +8,10 @@ >> #ifndef __GXBB_AOCLKC_H >> #define __GXBB_AOCLKC_H >> >> +#include "meson-aoclk.h" > > You are not using any of the structure defined in meson-aoclk.h in here. > Why do you include this here ? > my initial intention was trying to avoid inlcude it in gxbb-aoclk.c I could move to gxbb-aoclk.c if you prefer? >> + >> +#define NR_CLKS 7 >> + >> /* AO Configuration Clock registers offsets */ >> #define AO_RTI_PWR_CNTL_REG1 0x0c >> #define AO_RTI_PWR_CNTL_REG0 0x10 >> @@ -26,4 +30,7 @@ struct aoclk_cec_32k { >> >> extern const struct clk_ops meson_aoclk_cec_32k_ops; >> >> +#include <dt-bindings/clock/gxbb-aoclkc.h> >> +#include <dt-bindings/reset/gxbb-aoclkc.h> > Please drop this. > according to your last comment[1], you suggested to put these files here? and I thought it was a good idea.. or do you think it's kind of messy if we put too many private files into the C file (which has similar functionality and can be squashed together ?) .. [1] https://lkml.kernel.org/r/1518449571.2883.30.camel@baylibre.com > +#include <dt-bindings/clock/axg-aoclkc.h> > +#include <dt-bindings/reset/axg-aoclkc.h> I think those should be included in the same fashion as axg.h, gxbb.h and meson8.h ... which is at the end of the private header. >> + >> #endif /* __GXBB_AOCLKC_H */ >> diff --git a/drivers/clk/meson/meson-aoclk.c b/drivers/clk/meson/meson-aoclk.c >> new file mode 100644 >> index 000000000000..74338ef0a62b >> --- /dev/null >> +++ b/drivers/clk/meson/meson-aoclk.c >> @@ -0,0 +1,82 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * Amlogic Meson-AXG Clock Controller Driver >> + * >> + * Copyright (c) 2016 BayLibre, SAS. >> + * Author: Neil Armstrong <narmstrong@baylibre.com> >> + * >> + * Copyright (c) 2018 Amlogic, inc. >> + * Author: Qiufang Dai <qiufang.dai@amlogic.com> >> + * Author: Yixun Lan <yixun.lan@amlogic.com> >> + */ >> + >> +#include <linux/platform_device.h> >> +#include <linux/reset-controller.h> >> +#include <linux/mfd/syscon.h> >> +#include <linux/init.h> > Not required > will drop it >> +#include <linux/of_device.h> >> +#include "clk-regmap.h" >> +#include "meson-aoclk.h" >> + >> +static int meson_aoclk_do_reset(struct reset_controller_dev *rcdev, >> + unsigned long id) >> +{ >> + struct meson_aoclk_reset_controller *rstc = >> + container_of(rcdev, struct meson_aoclk_reset_controller, reset); >> + >> + return regmap_write(rstc->regmap, rstc->data->reset_reg, >> + BIT(rstc->data->reset[id])); >> +} >> + >> +static const struct reset_control_ops meson_aoclk_reset_ops = { >> + .reset = meson_aoclk_do_reset, >> +}; >> + >> +int meson_aoclkc_probe(struct platform_device *pdev) >> +{ >> + struct meson_aoclk_reset_controller *rstc; >> + struct meson_aoclk_data *data; >> + struct device *dev = &pdev->dev; >> + struct regmap *regmap; >> + int ret, clkid; >> + >> + data = (struct meson_aoclk_data *) of_device_get_match_data(dev); >> + if (!data) >> + return -ENODEV; >> + >> + rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL); >> + if (!rstc) >> + return -ENOMEM; >> + >> + regmap = syscon_node_to_regmap(of_get_parent(dev->of_node)); >> + if (IS_ERR(regmap)) { >> + dev_err(dev, "failed to get regmap\n"); >> + return PTR_ERR(regmap); >> + } >> + >> + /* Reset Controller */ >> + rstc->data = data; >> + rstc->regmap = regmap; >> + rstc->reset.ops = &meson_aoclk_reset_ops; >> + rstc->reset.nr_resets = data->num_reset, >> + rstc->reset.of_node = dev->of_node; >> + ret = devm_reset_controller_register(dev, &rstc->reset); >> + if (ret) { >> + dev_err(dev, "failed to register reset controller\n"); >> + return ret; >> + } >> + >> + /* >> + * Populate regmap and register all clks >> + */ >> + for (clkid = 0; clkid < data->num_clks; clkid++) { >> + data->clks[clkid]->map = regmap; >> + >> + ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]); >> + if (ret) >> + return ret; >> + } >> + >> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, >> + (void *) data->hw_data); >> +} >> diff --git a/drivers/clk/meson/meson-aoclk.h b/drivers/clk/meson/meson-aoclk.h >> new file mode 100644 >> index 000000000000..ec59e027dd37 >> --- /dev/null >> +++ b/drivers/clk/meson/meson-aoclk.h >> @@ -0,0 +1,35 @@ >> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >> +/* >> + * Copyright (c) 2017 BayLibre, SAS >> + * Author: Neil Armstrong <narmstrong@baylibre.com> >> + * >> + * Copyright (c) 2018 Amlogic, inc. >> + * Author: Qiufang Dai <qiufang.dai@amlogic.com> >> + * Author: Yixun Lan <yixun.lan@amlogic.com> >> + */ >> + >> +#ifndef __MESON_AOCLK_H__ >> +#define __MESON_AOCLK_H__ >> + >> +#include <linux/platform_device.h> >> +#include <linux/reset-controller.h> >> +#include "clk-regmap.h" >> + >> +struct meson_aoclk_data { >> + const unsigned int reset_reg; >> + const int num_reset; >> + const unsigned int *reset; >> + int num_clks; >> + struct clk_regmap **clks; >> + const struct clk_hw_onecell_data *hw_data; >> +}; >> + >> +struct meson_aoclk_reset_controller { >> + struct reset_controller_dev reset; >> + const struct meson_aoclk_data *data; >> + struct regmap *regmap; >> +}; >> + >> +int meson_aoclkc_probe(struct platform_device *pdev); >> +#endif >> + > > . > -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 2018-04-17 at 16:16 +0800, Yixun Lan wrote: > Hi Jerome > > On 04/16/18 18:38, Jerome Brunet wrote: > > > + */ > > > + for (clkid = 0; clkid < data->num_clks; clkid++) { > > > + data->clks[clkid]->map = regmap; > > > + > > > + ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]); > > > + if (ret) > > > + return ret; > > > + } > > > + > > > + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, > > > + (void *) data->hw_data); > > > +} > > > > Missing new line here. Please run checkpatch and pay attention to git warnings > > about whitespace errors. > > > Google this if you want, As far as I know the C language requires it and makes things nice when I cat the file. Anyway, I don't make those rules, It is just how it is. > > I think we actually need to avoid this extra new line, or what's the > benefits with new line? > > and besides， I didn't see any complaint from checkpatch.pl .. > > ./scripts/checkpatch.pl > 0002-clk-meson-aoclk-refactor-common-code-into-dedicated-.patch > WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? > #235: > new file mode 100644 > > total: 0 errors, 1 warnings, 302 lines checked > > NOTE: For some of the reported defects, checkpatch may be able to > mechanically convert to the typical style using --fix or > --fix-inplace. > > 0002-clk-meson-aoclk-refactor-common-code-into-dedicated-.patch has > style problems, please review. > > NOTE: If any of the errors are false positives, please report > them to the maintainer, see CHECKPATCH in MAINTAINERS. > > > Yixun -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index d5cbec522aec..fddc7ec7b820 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -3,6 +3,12 @@ config COMMON_CLK_AMLOGIC depends on OF depends on ARCH_MESON || COMPILE_TEST +config COMMON_CLK_MESON_AO + bool + depends on OF + depends on ARCH_MESON || COMPILE_TEST + select COMMON_CLK_REGMAP_MESON + config COMMON_CLK_REGMAP_MESON bool select REGMAP @@ -21,6 +27,7 @@ config COMMON_CLK_GXBB bool depends on COMMON_CLK_AMLOGIC select RESET_CONTROLLER + select COMMON_CLK_MESON_AO select COMMON_CLK_REGMAP_MESON select MFD_SYSCON help diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index ffee82e60b7a..0a8df284f4e7 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o +obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c index eebb580b9e0f..f2e0640a7f74 100644 --- a/drivers/clk/meson/gxbb-aoclk.c +++ b/drivers/clk/meson/gxbb-aoclk.c @@ -52,39 +52,13 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include <linux/clk-provider.h> -#include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/reset-controller.h> #include <linux/mfd/syscon.h> -#include <linux/regmap.h> #include <linux/init.h> -#include <linux/delay.h> -#include <dt-bindings/clock/gxbb-aoclkc.h> -#include <dt-bindings/reset/gxbb-aoclkc.h> #include "clk-regmap.h" #include "gxbb-aoclk.h" -struct gxbb_aoclk_reset_controller { - struct reset_controller_dev reset; - unsigned int *data; - struct regmap *regmap; -}; - -static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev, - unsigned long id) -{ - struct gxbb_aoclk_reset_controller *reset = - container_of(rcdev, struct gxbb_aoclk_reset_controller, reset); - - return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0, - BIT(reset->data[id])); -} - -static const struct reset_control_ops gxbb_aoclk_reset_ops = { - .reset = gxbb_aoclk_do_reset, -}; - #define GXBB_AO_GATE(_name, _bit) \ static struct clk_regmap _name##_ao = { \ .data = &(struct clk_regmap_gate_data) { \ @@ -117,7 +91,7 @@ static struct aoclk_cec_32k cec_32k_ao = { }, }; -static unsigned int gxbb_aoclk_reset[] = { +static const unsigned int gxbb_aoclk_reset[] = { [RESET_AO_REMOTE] = 16, [RESET_AO_I2C_MASTER] = 18, [RESET_AO_I2C_SLAVE] = 19, @@ -135,7 +109,7 @@ static struct clk_regmap *gxbb_aoclk_gate[] = { [CLKID_AO_IR_BLASTER] = &ir_blaster_ao, }; -static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { +static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { .hws = { [CLKID_AO_REMOTE] = &remote_ao.hw, [CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw, @@ -145,58 +119,55 @@ static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { [CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw, [CLKID_AO_CEC_32K] = &cec_32k_ao.hw, }, - .num = 7, + .num = NR_CLKS, }; -static int gxbb_aoclkc_probe(struct platform_device *pdev) +static int gxbb_register_cec_ao_32k(struct platform_device *pdev) { - struct gxbb_aoclk_reset_controller *rstc; struct device *dev = &pdev->dev; struct regmap *regmap; - int ret, clkid; - - rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL); - if (!rstc) - return -ENOMEM; + int ret; regmap = syscon_node_to_regmap(of_get_parent(dev->of_node)); if (IS_ERR(regmap)) { dev_err(dev, "failed to get regmap\n"); - return -ENODEV; - } - - /* Reset Controller */ - rstc->regmap = regmap; - rstc->data = gxbb_aoclk_reset; - rstc->reset.ops = &gxbb_aoclk_reset_ops; - rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset); - rstc->reset.of_node = dev->of_node; - ret = devm_reset_controller_register(dev, &rstc->reset); - - /* - * Populate regmap and register all clks - */ - for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) { - gxbb_aoclk_gate[clkid]->map = regmap; - - ret = devm_clk_hw_register(dev, - gxbb_aoclk_onecell_data.hws[clkid]); - if (ret) - return ret; + return PTR_ERR(regmap); } /* Specific clocks */ cec_32k_ao.regmap = regmap; ret = devm_clk_hw_register(dev, &cec_32k_ao.hw); + if (ret) { + dev_err(&pdev->dev, "clk cec_32k_ao register failed.\n"); + return ret; + } + + return 0; +} + +static const struct meson_aoclk_data gxbb_aoclkc_data = { + .reset_reg = AO_RTI_GEN_CNTL_REG0, + .num_reset = ARRAY_SIZE(gxbb_aoclk_reset), + .reset = gxbb_aoclk_reset, + .num_clks = ARRAY_SIZE(gxbb_aoclk_gate), + .clks = gxbb_aoclk_gate, + .hw_data = &gxbb_aoclk_onecell_data, +}; + +static int gxbb_aoclkc_probe(struct platform_device *pdev) +{ + int ret = gxbb_register_cec_ao_32k(pdev); if (ret) return ret; - return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, - &gxbb_aoclk_onecell_data); + return meson_aoclkc_probe(pdev); } static const struct of_device_id gxbb_aoclkc_match_table[] = { - { .compatible = "amlogic,meson-gx-aoclkc" }, + { + .compatible = "amlogic,meson-gx-aoclkc", + .data = &gxbb_aoclkc_data, + }, { } }; diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h index badc4c22b4ee..b031f1a0213e 100644 --- a/drivers/clk/meson/gxbb-aoclk.h +++ b/drivers/clk/meson/gxbb-aoclk.h @@ -8,6 +8,10 @@ #ifndef __GXBB_AOCLKC_H #define __GXBB_AOCLKC_H +#include "meson-aoclk.h" + +#define NR_CLKS 7 + /* AO Configuration Clock registers offsets */ #define AO_RTI_PWR_CNTL_REG1 0x0c #define AO_RTI_PWR_CNTL_REG0 0x10 @@ -26,4 +30,7 @@ struct aoclk_cec_32k { extern const struct clk_ops meson_aoclk_cec_32k_ops; +#include <dt-bindings/clock/gxbb-aoclkc.h> +#include <dt-bindings/reset/gxbb-aoclkc.h> + #endif /* __GXBB_AOCLKC_H */ diff --git a/drivers/clk/meson/meson-aoclk.c b/drivers/clk/meson/meson-aoclk.c new file mode 100644 index 000000000000..74338ef0a62b --- /dev/null +++ b/drivers/clk/meson/meson-aoclk.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Amlogic Meson-AXG Clock Controller Driver + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Copyright (c) 2018 Amlogic, inc. + * Author: Qiufang Dai <qiufang.dai@amlogic.com> + * Author: Yixun Lan <yixun.lan@amlogic.com> + */ + +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <linux/mfd/syscon.h> +#include <linux/init.h> +#include <linux/of_device.h> +#include "clk-regmap.h" +#include "meson-aoclk.h" + +static int meson_aoclk_do_reset(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct meson_aoclk_reset_controller *rstc = + container_of(rcdev, struct meson_aoclk_reset_controller, reset); + + return regmap_write(rstc->regmap, rstc->data->reset_reg, + BIT(rstc->data->reset[id])); +} + +static const struct reset_control_ops meson_aoclk_reset_ops = { + .reset = meson_aoclk_do_reset, +}; + +int meson_aoclkc_probe(struct platform_device *pdev) +{ + struct meson_aoclk_reset_controller *rstc; + struct meson_aoclk_data *data; + struct device *dev = &pdev->dev; + struct regmap *regmap; + int ret, clkid; + + data = (struct meson_aoclk_data *) of_device_get_match_data(dev); + if (!data) + return -ENODEV; + + rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL); + if (!rstc) + return -ENOMEM; + + regmap = syscon_node_to_regmap(of_get_parent(dev->of_node)); + if (IS_ERR(regmap)) { + dev_err(dev, "failed to get regmap\n"); + return PTR_ERR(regmap); + } + + /* Reset Controller */ + rstc->data = data; + rstc->regmap = regmap; + rstc->reset.ops = &meson_aoclk_reset_ops; + rstc->reset.nr_resets = data->num_reset, + rstc->reset.of_node = dev->of_node; + ret = devm_reset_controller_register(dev, &rstc->reset); + if (ret) { + dev_err(dev, "failed to register reset controller\n"); + return ret; + } + + /* + * Populate regmap and register all clks + */ + for (clkid = 0; clkid < data->num_clks; clkid++) { + data->clks[clkid]->map = regmap; + + ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]); + if (ret) + return ret; + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + (void *) data->hw_data); +} diff --git a/drivers/clk/meson/meson-aoclk.h b/drivers/clk/meson/meson-aoclk.h new file mode 100644 index 000000000000..ec59e027dd37 --- /dev/null +++ b/drivers/clk/meson/meson-aoclk.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2017 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Copyright (c) 2018 Amlogic, inc. + * Author: Qiufang Dai <qiufang.dai@amlogic.com> + * Author: Yixun Lan <yixun.lan@amlogic.com> + */ + +#ifndef __MESON_AOCLK_H__ +#define __MESON_AOCLK_H__ + +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include "clk-regmap.h" + +struct meson_aoclk_data { + const unsigned int reset_reg; + const int num_reset; + const unsigned int *reset; + int num_clks; + struct clk_regmap **clks; + const struct clk_hw_onecell_data *hw_data; +}; + +struct meson_aoclk_reset_controller { + struct reset_controller_dev reset; + const struct meson_aoclk_data *data; + struct regmap *regmap; +}; + +int meson_aoclkc_probe(struct platform_device *pdev); +#endif +
We try to refactor the common code into one dedicated file, while preparing to add new Meson-AXG aoclk driver, this would help us to better share the code by all aoclk drivers. Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> --- drivers/clk/meson/Kconfig | 7 ++++ drivers/clk/meson/Makefile | 1 + drivers/clk/meson/gxbb-aoclk.c | 91 ++++++++++++++--------------------------- drivers/clk/meson/gxbb-aoclk.h | 7 ++++ drivers/clk/meson/meson-aoclk.c | 82 +++++++++++++++++++++++++++++++++++++ drivers/clk/meson/meson-aoclk.h | 35 ++++++++++++++++ 6 files changed, 163 insertions(+), 60 deletions(-) create mode 100644 drivers/clk/meson/meson-aoclk.c create mode 100644 drivers/clk/meson/meson-aoclk.h