diff mbox series

[v2,10/10] firmware: arm_scmi: Use asynchronous CLOCK_RATE_SET when possible

Message ID 20190726135138.9858-11-sudeep.holla@arm.com (mailing list archive)
State Awaiting Upstream, archived
Headers show
Series None | expand

Commit Message

Sudeep Holla July 26, 2019, 1:51 p.m. UTC 
CLOCK_PROTOCOL_ATTRIBUTES provides attributes to indicate the maximum
number of pending asynchronous clock rate changes supported by the
platform. If it's non-zero, then we should be able to use asynchronous
clock rate set for any clocks until the maximum limit is reached.

Tracking the current count of pending asynchronous clock set rate
requests, we can decide if the incoming/new request for clock set rate
can be handled asynchronously or not until the maximum limit is
reached.

Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/arm_scmi/clock.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

Comments

Stephen Boyd July 26, 2019, 4:22 p.m. UTC | #1 
Quoting Sudeep Holla (2019-07-26 06:51:38)
> CLOCK_PROTOCOL_ATTRIBUTES provides attributes to indicate the maximum
> number of pending asynchronous clock rate changes supported by the
> platform. If it's non-zero, then we should be able to use asynchronous
> clock rate set for any clocks until the maximum limit is reached.
> 
> Tracking the current count of pending asynchronous clock set rate
> requests, we can decide if the incoming/new request for clock set rate
> can be handled asynchronously or not until the maximum limit is
> reached.
> 
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: linux-clk@vger.kernel.org
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---

Reviewed-by: Stephen Boyd <sboyd@kernel.org>
diff mbox series

Patch

diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
index dd215bd11a58..4a32ae1822a3 100644
--- a/drivers/firmware/arm_scmi/clock.c
+++ b/drivers/firmware/arm_scmi/clock.c
@@ -56,7 +56,7 @@  struct scmi_msg_resp_clock_describe_rates {
 struct scmi_clock_set_rate {
 	__le32 flags;
 #define CLOCK_SET_ASYNC		BIT(0)
-#define CLOCK_SET_DELAYED	BIT(1)
+#define CLOCK_SET_IGNORE_RESP	BIT(1)
 #define CLOCK_SET_ROUND_UP	BIT(2)
 #define CLOCK_SET_ROUND_AUTO	BIT(3)
 	__le32 id;
@@ -67,6 +67,7 @@  struct scmi_clock_set_rate {
 struct clock_info {
 	int num_clocks;
 	int max_async_req;
+	atomic_t cur_async_req;
 	struct scmi_clock_info *clk;
 };
 
@@ -221,21 +222,33 @@  static int scmi_clock_rate_set(const struct scmi_handle *handle, u32 clk_id,
 			       u64 rate)
 {
 	int ret;
+	u32 flags = 0;
 	struct scmi_xfer *t;
 	struct scmi_clock_set_rate *cfg;
+	struct clock_info *ci = handle->clk_priv;
 
 	ret = scmi_xfer_get_init(handle, CLOCK_RATE_SET, SCMI_PROTOCOL_CLOCK,
 				 sizeof(*cfg), 0, &t);
 	if (ret)
 		return ret;
 
+	if (ci->max_async_req &&
+	    atomic_inc_return(&ci->cur_async_req) < ci->max_async_req)
+		flags |= CLOCK_SET_ASYNC;
+
 	cfg = t->tx.buf;
-	cfg->flags = cpu_to_le32(0);
+	cfg->flags = cpu_to_le32(flags);
 	cfg->id = cpu_to_le32(clk_id);
 	cfg->value_low = cpu_to_le32(rate & 0xffffffff);
 	cfg->value_high = cpu_to_le32(rate >> 32);
 
-	ret = scmi_do_xfer(handle, t);
+	if (flags & CLOCK_SET_ASYNC)
+		ret = scmi_do_xfer_with_response(handle, t);
+	else
+		ret = scmi_do_xfer(handle, t);
+
+	if (ci->max_async_req)
+		atomic_dec(&ci->cur_async_req);
 
 	scmi_xfer_put(handle, t);
 	return ret;