diff mbox series

clk: samsung: exynos542x: Move MSCL subsystem clocks to its sub-CMU

Message ID 20190808121839.23892-1-m.szyprowski@samsung.com (mailing list archive)
State Accepted, archived
Headers show
Series clk: samsung: exynos542x: Move MSCL subsystem clocks to its sub-CMU | expand

Commit Message

Marek Szyprowski Aug. 8, 2019, 12:18 p.m. UTC 
M2M scaler clocks require special handling of their parent bus clock during
power domain on/off sequences. MSCL clocks were not initially added to the
sub-CMU handler, because that time there was no driver for the M2M scaler
device and it was not possible to test it.

This patch fixes this issue. Parent clock for M2M scaler devices is now
properly preserved during MSC power domain on/off sequence. This gives M2M
scaler devices proper performance: fullHD XRGB32 image 1000 rotations test
takes 3.17s instead of 45.08s.

Fixes: b06a532bf1fa ("clk: samsung: Add Exynos5 sub-CMU clock driver")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/clk/samsung/clk-exynos5420.c | 48 ++++++++++++++++++++--------
 1 file changed, 34 insertions(+), 14 deletions(-)

Comments

Sylwester Nawrocki/Kernel \(PLT\) /SRPOL/Staff Engineer/Samsung Electronics Aug. 8, 2019, 3:11 p.m. UTC | #1 
On 8/8/19 14:18, Marek Szyprowski wrote:
> M2M scaler clocks require special handling of their parent bus clock during
> power domain on/off sequences. MSCL clocks were not initially added to the
> sub-CMU handler, because that time there was no driver for the M2M scaler
> device and it was not possible to test it.
> 
> This patch fixes this issue. Parent clock for M2M scaler devices is now
> properly preserved during MSC power domain on/off sequence. This gives M2M
> scaler devices proper performance: fullHD XRGB32 image 1000 rotations test
> takes 3.17s instead of 45.08s.
> 
> Fixes: b06a532bf1fa ("clk: samsung: Add Exynos5 sub-CMU clock driver")
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

Stephen, could you apply this patch directly to clk-fixes, on top of
my patches:

[v2,2/2] clk: samsung: exynos5800: Move MAU subsystem clocks to MAU sub-CMU
[v2,1/2] clk: samsung: Change signature of exynos5_subcmus_init() function 

? Regression that these 3 patches are fixing is not new, it has been
introduced much earlier than 5.3-rc1, however it's quite serious and it
would be good to have the fixes already in 5.3 release.  
If that's your preference I will just queue these patches for coming
merge window.
Stephen Boyd Aug. 8, 2019, 8:16 p.m. UTC | #2 
Quoting Sylwester Nawrocki (2019-08-08 08:11:44)
> On 8/8/19 14:18, Marek Szyprowski wrote:
> Stephen, could you apply this patch directly to clk-fixes, on top of
> my patches:
> 
> [v2,2/2] clk: samsung: exynos5800: Move MAU subsystem clocks to MAU sub-CMU
> [v2,1/2] clk: samsung: Change signature of exynos5_subcmus_init() function 
> 
> ? Regression that these 3 patches are fixing is not new, it has been
> introduced much earlier than 5.3-rc1, however it's quite serious and it
> would be good to have the fixes already in 5.3 release.  
> If that's your preference I will just queue these patches for coming
> merge window.
> 

Ok. I'll throw it into fixes and push it out later today.
diff mbox series

Patch

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index b52daf5aa755..ec0515d7f627 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -893,9 +893,6 @@  static const struct samsung_div_clock exynos5x_div_clks[] __initconst = {
 	/* GSCL Block */
 	DIV(0, "dout_gscl_blk_333", "aclk333_432_gscl", DIV2_RATIO0, 6, 2),
 
-	/* MSCL Block */
-	DIV(0, "dout_mscl_blk", "aclk400_mscl", DIV2_RATIO0, 28, 2),
-
 	/* PSGEN */
 	DIV(0, "dout_gen_blk", "mout_user_aclk266", DIV2_RATIO0, 8, 1),
 	DIV(0, "dout_jpg_blk", "aclk166", DIV2_RATIO0, 20, 1),
@@ -1159,17 +1156,6 @@  static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
 	GATE(CLK_FIMC_LITE3, "fimc_lite3", "aclk333_432_gscl",
 			GATE_IP_GSCL1, 17, 0, 0),
 
-	/* MSCL Block */
-	GATE(CLK_MSCL0, "mscl0", "aclk400_mscl", GATE_IP_MSCL, 0, 0, 0),
-	GATE(CLK_MSCL1, "mscl1", "aclk400_mscl", GATE_IP_MSCL, 1, 0, 0),
-	GATE(CLK_MSCL2, "mscl2", "aclk400_mscl", GATE_IP_MSCL, 2, 0, 0),
-	GATE(CLK_SMMU_MSCL0, "smmu_mscl0", "dout_mscl_blk",
-			GATE_IP_MSCL, 8, 0, 0),
-	GATE(CLK_SMMU_MSCL1, "smmu_mscl1", "dout_mscl_blk",
-			GATE_IP_MSCL, 9, 0, 0),
-	GATE(CLK_SMMU_MSCL2, "smmu_mscl2", "dout_mscl_blk",
-			GATE_IP_MSCL, 10, 0, 0),
-
 	/* ISP */
 	GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "dout_uart_isp",
 			GATE_TOP_SCLK_ISP, 0, CLK_SET_RATE_PARENT, 0),
@@ -1278,6 +1264,28 @@  static struct exynos5_subcmu_reg_dump exynos5x_mfc_suspend_regs[] = {
 	{ DIV4_RATIO, 0, 0x3 },			/* DIV dout_mfc_blk */
 };
 
+static const struct samsung_gate_clock exynos5x_mscl_gate_clks[] __initconst = {
+	/* MSCL Block */
+	GATE(CLK_MSCL0, "mscl0", "aclk400_mscl", GATE_IP_MSCL, 0, 0, 0),
+	GATE(CLK_MSCL1, "mscl1", "aclk400_mscl", GATE_IP_MSCL, 1, 0, 0),
+	GATE(CLK_MSCL2, "mscl2", "aclk400_mscl", GATE_IP_MSCL, 2, 0, 0),
+	GATE(CLK_SMMU_MSCL0, "smmu_mscl0", "dout_mscl_blk",
+			GATE_IP_MSCL, 8, 0, 0),
+	GATE(CLK_SMMU_MSCL1, "smmu_mscl1", "dout_mscl_blk",
+			GATE_IP_MSCL, 9, 0, 0),
+	GATE(CLK_SMMU_MSCL2, "smmu_mscl2", "dout_mscl_blk",
+			GATE_IP_MSCL, 10, 0, 0),
+};
+
+static const struct samsung_div_clock exynos5x_mscl_div_clks[] __initconst = {
+	DIV(0, "dout_mscl_blk", "aclk400_mscl", DIV2_RATIO0, 28, 2),
+};
+
+static struct exynos5_subcmu_reg_dump exynos5x_mscl_suspend_regs[] = {
+	{ GATE_IP_MSCL, 0xffffffff, 0xffffffff }, /* MSCL gates */
+	{ SRC_TOP3, 0, BIT(4) },		/* MUX mout_user_aclk400_mscl */
+	{ DIV2_RATIO0, 0, 0x30000000 },		/* DIV dout_mscl_blk */
+};
 
 static const struct samsung_gate_clock exynos5800_mau_gate_clks[] __initconst = {
 	GATE(CLK_MAU_EPLL, "mau_epll", "mout_user_mau_epll",
@@ -1322,6 +1330,16 @@  static const struct exynos5_subcmu_info exynos5x_mfc_subcmu = {
 	.pd_name	= "MFC",
 };
 
+static const struct exynos5_subcmu_info exynos5x_mscl_subcmu = {
+	.div_clks	= exynos5x_mscl_div_clks,
+	.nr_div_clks	= ARRAY_SIZE(exynos5x_mscl_div_clks),
+	.gate_clks	= exynos5x_mscl_gate_clks,
+	.nr_gate_clks	= ARRAY_SIZE(exynos5x_mscl_gate_clks),
+	.suspend_regs	= exynos5x_mscl_suspend_regs,
+	.nr_suspend_regs = ARRAY_SIZE(exynos5x_mscl_suspend_regs),
+	.pd_name	= "MSC",
+};
+
 static const struct exynos5_subcmu_info exynos5800_mau_subcmu = {
 	.gate_clks	= exynos5800_mau_gate_clks,
 	.nr_gate_clks	= ARRAY_SIZE(exynos5800_mau_gate_clks),
@@ -1334,12 +1352,14 @@  static const struct exynos5_subcmu_info *exynos5x_subcmus[] = {
 	&exynos5x_disp_subcmu,
 	&exynos5x_gsc_subcmu,
 	&exynos5x_mfc_subcmu,
+	&exynos5x_mscl_subcmu,
 };
 
 static const struct exynos5_subcmu_info *exynos5800_subcmus[] = {
 	&exynos5x_disp_subcmu,
 	&exynos5x_gsc_subcmu,
 	&exynos5x_mfc_subcmu,
+	&exynos5x_mscl_subcmu,
 	&exynos5800_mau_subcmu,
 };