diff mbox series

[2/3] clk: rockchip: convert basic pll lock_wait to use regmap_read_poll_timeout

Message ID 20200128100204.1318450-2-heiko@sntech.de (mailing list archive)
State Awaiting Upstream, archived
Headers show
Series [1/3] clk: rockchip: convert rk3399 pll type to use readl_poll_timeout | expand

Commit Message

Heiko Stuebner Jan. 28, 2020, 10:02 a.m. UTC 
From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>

Instead of open coding the polling of the lock status, use the
handy regmap_read_poll_timeout for this. As the pll locking is
normally blazingly fast and we don't want to incur additional
delays, we're not doing any sleeps similar to for example the imx
clk-pllv4 and define a very safe but still short timeout of 1ms.

Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
---
 drivers/clk/rockchip/clk-pll.c | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c
index 43c9fd0086a2..26ca46d49191 100644
--- a/drivers/clk/rockchip/clk-pll.c
+++ b/drivers/clk/rockchip/clk-pll.c
@@ -86,23 +86,14 @@  static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
 {
 	struct regmap *grf = pll->ctx->grf;
 	unsigned int val;
-	int delay = 24000000, ret;
-
-	while (delay > 0) {
-		ret = regmap_read(grf, pll->lock_offset, &val);
-		if (ret) {
-			pr_err("%s: failed to read pll lock status: %d\n",
-			       __func__, ret);
-			return ret;
-		}
+	int ret;
 
-		if (val & BIT(pll->lock_shift))
-			return 0;
-		delay--;
-	}
+	ret = regmap_read_poll_timeout(grf, pll->lock_offset, val,
+				       val & BIT(pll->lock_shift), 0, 1000);
+	if (ret)
+		pr_err("%s: timeout waiting for pll to lock\n", __func__);
 
-	pr_err("%s: timeout waiting for pll to lock\n", __func__);
-	return -ETIMEDOUT;
+	return ret;
 }
 
 /**