| Message ID | 20210408185731.135511-7-marex@denx.de (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | ARM: dts: stm32: clk: Switch ETHRX clock parent from ETHCK_K to MCO2 on DHCOM SoM | expand |
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 08ab62c9f254..f003c05c24c3 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -849,6 +849,21 @@ pins { }; }; + mco2_pins_a: mco2-0 { + pins { + pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + mco2_sleep_pins_a: mco2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */ + }; + }; + m_can1_pins_a: m-can1-0 { pins1 { pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
Add pinmux option for MCO2 pin. This is used on DHCOM when the ethernet PHY 50 MHz clock is generated by the MCO2 on PG2 pin. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Christophe Roullier <christophe.roullier@foss.st.com> Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Stephen Boyd <swboyd@chromium.org> Cc: linux-clk@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org --- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)