new file mode 100644
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/stericsson,u8500-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson DB8500 (U8500) clocks
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: While named "U8500 clocks" these clocks are inside the
+ DB8500 digital baseband system-on-chip and its siblings such as
+ DB8520. These bindings consider the clocks present in the SoC
+ itself, not off-chip clocks. There are four different on-chip
+ clocks - RTC (32 kHz), CPU clock (SMP TWD), PRCMU (power reset and
+ control management unit) clocks and PRCC (peripheral reset and
+ clock controller) clocks.
+
+properties:
+ compatible:
+ oneOf:
+ - const: stericsson,u8500-clks
+ - const: stericsson,u8540-clks
+ - const: stericsson,u9540-clks
+
+ reg:
+ items:
+ - description: PRCC 1 register area
+ - description: PRCC 2 register area
+ - description: PRCC 3 register area
+ - description: PRCC 5 register area
+ - description: PRCC 6 register area
+
+ prcmu-clock:
+ description: A subnode with one clock cell for PRCMU (power, reset, control
+ management unit) clocks. The cell indicates which PRCMU clock in the
+ prcmu-clock node the consumer wants to use.
+ type: object
+
+ properties:
+ '#clock-cells':
+ const: 1
+
+ additionalProperties: false
+
+ prcc-periph-clock:
+ description: A subnode with two clock cells for PRCC (peripheral
+ reset and clock controller) peripheral clocks. The first cell indicates
+ which PRCC block the consumer wants to use, possible values are 1, 2, 3,
+ 5, 6. The second cell indicates which clock inside the PRCC block it
+ wants, possible values are 0 thru 31.
+ type: object
+
+ properties:
+ '#clock-cells':
+ const: 2
+
+ additionalProperties: false
+
+ prcc-kernel-clock:
+ description: A subnode with two clock cells for PRCC (peripheral reset
+ and clock controller) kernel clocks. The first cell indicates which PRCC
+ block the consumer wants to use, possible values are 1, 2, 3, 5, 6. The
+ second cell indicates which clock inside the PRCC block it wants, possible
+ values are 0 thru 31.
+ type: object
+
+ properties:
+ '#clock-cells':
+ const: 2
+
+ additionalProperties: false
+
+ prcc-reset-controller:
+ description: A subnode with two reset cells for the reset portions of the
+ PRCC (peripheral reset and clock controller). The first cell indicates
+ which PRCC block the consumer wants to use, possible values are 1, 2, 3
+ 5 and 6. The second cell indicates which reset line inside the PRCC block
+ it wants to control, possible values are 0 thru 31.
+
+ rtc32k-clock:
+ description: A subnode with zero clock cells for the 32kHz RTC clock.
+ type: object
+
+ properties:
+ '#clock-cells':
+ const: 0
+
+ additionalProperties: false
+
+ smp-twd-clock:
+ description: A subnode for the ARM SMP Timer Watchdog cluster with zero
+ clock cells.
+ type: object
+
+ properties:
+ '#clock-cells':
+ const: 0
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - prcmu-clock
+ - prcc-periph-clock
+ - prcc-kernel-clock
+ - rtc32k-clock
+ - smp-twd-clock
+
+additionalProperties: false
deleted file mode 100644
@@ -1,64 +0,0 @@
-Clock bindings for ST-Ericsson Ux500 clocks
-
-Required properties :
-- compatible : shall contain only one of the following:
- "stericsson,u8500-clks"
- "stericsson,u8540-clks"
- "stericsson,u9540-clks"
-- reg : shall contain base register location and length for
- CLKRST1, 2, 3, 5, and 6 in an array. Note the absence of
- CLKRST4, which does not exist.
-
-Required subnodes:
-- prcmu-clock: a subnode with one clock cell for PRCMU (power,
- reset, control unit) clocks. The cell indicates which PRCMU
- clock in the prcmu-clock node the consumer wants to use.
-- prcc-periph-clock: a subnode with two clock cells for
- PRCC (programmable reset- and clock controller) peripheral clocks.
- The first cell indicates which PRCC block the consumer
- wants to use, possible values are 1, 2, 3, 5, 6. The second
- cell indicates which clock inside the PRCC block it wants,
- possible values are 0 thru 31.
-- prcc-kernel-clock: a subnode with two clock cells for
- PRCC (programmable reset- and clock controller) kernel clocks
- The first cell indicates which PRCC block the consumer
- wants to use, possible values are 1, 2, 3, 5, 6. The second
- cell indicates which clock inside the PRCC block it wants,
- possible values are 0 thru 31.
-- rtc32k-clock: a subnode with zero clock cells for the 32kHz
- RTC clock.
-- smp-twd-clock: a subnode for the ARM SMP Timer Watchdog cluster
- with zero clock cells.
-
-Example:
-
-clocks {
- compatible = "stericsson,u8500-clks";
- /*
- * Registers for the CLKRST block on peripheral
- * groups 1, 2, 3, 5, 6,
- */
- reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
- <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
- <0xa03cf000 0x1000>;
-
- prcmu_clk: prcmu-clock {
- #clock-cells = <1>;
- };
-
- prcc_pclk: prcc-periph-clock {
- #clock-cells = <2>;
- };
-
- prcc_kclk: prcc-kernel-clock {
- #clock-cells = <2>;
- };
-
- rtc_clk: rtc32k-clock {
- #clock-cells = <0>;
- };
-
- smp_twd_clk: smp-twd-clock {
- #clock-cells = <0>;
- };
-};
new file mode 100644
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DT_BINDINGS_STE_PRCC_RESET
+#define _DT_BINDINGS_STE_PRCC_RESET
+
+#define DB8500_PRCC_1 1
+#define DB8500_PRCC_2 2
+#define DB8500_PRCC_3 3
+#define DB8500_PRCC_6 6
+
+/* Reset lines on PRCC 1 */
+#define DB8500_PRCC_1_RESET_UART0 0
+#define DB8500_PRCC_1_RESET_UART1 1
+#define DB8500_PRCC_1_RESET_I2C1 2
+#define DB8500_PRCC_1_RESET_MSP0 3
+#define DB8500_PRCC_1_RESET_MSP1 4
+#define DB8500_PRCC_1_RESET_SDI0 5
+#define DB8500_PRCC_1_RESET_I2C2 6
+#define DB8500_PRCC_1_RESET_SPI3 7
+#define DB8500_PRCC_1_RESET_SLIMBUS0 8
+#define DB8500_PRCC_1_RESET_I2C4 9
+#define DB8500_PRCC_1_RESET_MSP3 10
+#define DB8500_PRCC_1_RESET_PER_MSP3 11
+#define DB8500_PRCC_1_RESET_PER_MSP1 12
+#define DB8500_PRCC_1_RESET_PER_MSP0 13
+#define DB8500_PRCC_1_RESET_PER_SLIMBUS 14
+
+/* Reset lines on PRCC 2 */
+#define DB8500_PRCC_2_RESET_I2C3 0
+#define DB8500_PRCC_2_RESET_PWL 1
+#define DB8500_PRCC_2_RESET_SDI4 2
+#define DB8500_PRCC_2_RESET_MSP2 3
+#define DB8500_PRCC_2_RESET_SDI1 4
+#define DB8500_PRCC_2_RESET_SDI3 5
+#define DB8500_PRCC_2_RESET_HSIRX 6
+#define DB8500_PRCC_2_RESET_HSITX 7
+#define DB8500_PRCC_1_RESET_PER_MSP2 8
+
+/* Reset lines on PRCC 3 */
+#define DB8500_PRCC_3_RESET_SSP0 1
+#define DB8500_PRCC_3_RESET_SSP1 2
+#define DB8500_PRCC_3_RESET_I2C0 3
+#define DB8500_PRCC_3_RESET_SDI2 4
+#define DB8500_PRCC_3_RESET_SKE 5
+#define DB8500_PRCC_3_RESET_UART2 6
+#define DB8500_PRCC_3_RESET_SDI5 7
+
+/* Reset lines on PRCC 6 */
+#define DB8500_PRCC_3_RESET_RNG 0
+
+#endif
This rewrites the ux500/u8500 clock bindings in YAML schema and extends them with the PRCC reset controller. The bindings are a bit idiomatic but it just reflects their age, the ux500 platform was used as guinea pig for early device tree conversion of platforms in 2015. The new subnode for the reset controller follows the pattern of the old bindings and adds a node with reset-cells for this. Cc: devicetree@vger.kernel.org Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- .../bindings/clock/stericsson,u8500-clks.yaml | 113 ++++++++++++++++++ .../devicetree/bindings/clock/ux500.txt | 64 ---------- .../reset/stericsson,db8500-prcc-reset.h | 51 ++++++++ 3 files changed, 164 insertions(+), 64 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml delete mode 100644 Documentation/devicetree/bindings/clock/ux500.txt create mode 100644 include/dt-bindings/reset/stericsson,db8500-prcc-reset.h