new file mode 100644
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s2mps11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The Samsung S2MPS11/13/14/15 and S2MPU02 is a family of Power Management IC
+ which include voltage and current regulators, RTC, clock outputs and other
+ sub-blocks.
+
+properties:
+ compatible:
+ enum:
+ - samsung,s2mps11-pmic
+ - samsung,s2mps13-pmic
+ - samsung,s2mps14-pmic
+ - samsung,s2mps15-pmic
+ - samsung,s2mpu02-pmic
+
+ clocks:
+ $ref: ../clock/samsung,s2mps11.yaml
+ description:
+ Child node describing clock provider.
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ type: object
+ description:
+ List of child nodes that specify the regulators.
+
+ samsung,s2mps11-acokb-ground:
+ description: |
+ Indicates that ACOKB pin of S2MPS11 PMIC is connected to the ground so
+ the PMIC must manually set PWRHOLD bit in CTRL1 register to turn off the
+ power. Usually the ACOKB is pulled up to VBATT so when PWRHOLD pin goes
+ low, the rising ACOKB will trigger power off.
+ type: boolean
+
+ samsung,s2mps11-wrstbi-ground:
+ description: |
+ Indicates that WRSTBI pin of PMIC is pulled down. When the system is
+ suspended it will always go down thus triggerring unwanted buck warm
+ reset (setting buck voltages to default values).
+ type: boolean
+
+ wakeup-source: true
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,s2mps11-pmic
+ then:
+ properties:
+ regulators:
+ $ref: ../regulator/samsung,s2mps11.yaml
+ samsung,s2mps11-wrstbi-ground: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,s2mps13-pmic
+ then:
+ properties:
+ regulators:
+ $ref: ../regulator/samsung,s2mps13.yaml
+ samsung,s2mps11-acokb-ground: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,s2mps14-pmic
+ then:
+ properties:
+ regulators:
+ $ref: ../regulator/samsung,s2mps14.yaml
+ samsung,s2mps11-acokb-ground: false
+ samsung,s2mps11-wrstbi-ground: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,s2mps15-pmic
+ then:
+ properties:
+ regulators:
+ $ref: ../regulator/samsung,s2mps15.yaml
+ samsung,s2mps11-acokb-ground: false
+ samsung,s2mps11-wrstbi-ground: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,s2mpu02-pmic
+ then:
+ properties:
+ regulators:
+ $ref: ../regulator/samsung,s2mpu02.yaml
+ samsung,s2mps11-acokb-ground: false
+ samsung,s2mps11-wrstbi-ground: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps11_irq>;
+ samsung,s2mps11-acokb-ground;
+ wakeup-source;
+
+ clocks {
+ compatible = "samsung,s2mps11-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ LDO1 {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ LDO4 {
+ regulator-name = "vdd_adc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ // ....
+
+ BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-coupled-with = <&buck3_reg>;
+ regulator-coupled-max-spread = <300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-coupled-with = <&buck2_reg>;
+ regulator-coupled-max-spread = <300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ // ...
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@66 {
+ compatible = "samsung,s2mps14-pmic";
+ reg = <0x66>;
+
+ interrupt-parent = <&gpx0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+
+ clocks {
+ compatible = "samsung,s2mps14-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps14_ap", "unused", "s2mps14_bt";
+ };
+
+ regulators {
+ LDO1 {
+ regulator-name = "VLDO1_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ // ...
+
+ BUCK1 {
+ regulator-name = "VBUCK1_1.0V";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ // ...
+ };
+ };
+ };
@@ -16637,6 +16637,7 @@ L: linux-kernel@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
+F: Documentation/devicetree/bindings/mfd/samsung,s2m*.yaml
F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
F: Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
F: Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml