diff mbox series

[v5,06/11] platform/x86: int3472: Enable I2c daisy chain

Message ID 20211102094907.31271-7-hdegoede@redhat.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data | expand

Commit Message

Hans de Goede Nov. 2, 2021, 9:49 a.m. UTC 
From: Daniel Scally <djrscally@gmail.com>

The TPS68470 PMIC has an I2C passthrough mode through which I2C traffic
can be forwarded to a device connected to the PMIC as though it were
connected directly to the system bus. Enable this mode when the chip
is initialised.

Signed-off-by: Daniel Scally <djrscally@gmail.com>
---
 .../x86/intel/int3472/intel_skl_int3472_tps68470.c         | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/drivers/platform/x86/intel/int3472/intel_skl_int3472_tps68470.c b/drivers/platform/x86/intel/int3472/intel_skl_int3472_tps68470.c
index c05b4cf502fe..42e688f4cad4 100644
--- a/drivers/platform/x86/intel/int3472/intel_skl_int3472_tps68470.c
+++ b/drivers/platform/x86/intel/int3472/intel_skl_int3472_tps68470.c
@@ -45,6 +45,13 @@  static int tps68470_chip_init(struct device *dev, struct regmap *regmap)
 		return ret;
 	}
 
+	/* Enable I2C daisy chain */
+	ret = regmap_write(regmap, TPS68470_REG_S_I2C_CTL, 0x03);
+	if (ret) {
+		dev_err(dev, "Failed to enable i2c daisy chain\n");
+		return ret;
+	}
+
 	dev_info(dev, "TPS68470 REVID: 0x%02x\n", version);
 
 	return 0;