diff mbox series

[v6,12/15] platform/x86: int3472: Deal with probe ordering issues

Message ID 20211125165412.535063-13-hdegoede@redhat.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data | expand

Commit Message

Hans de Goede Nov. 25, 2021, 4:54 p.m. UTC 
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.

To work around this info missing from the ACPI tables on devices where
the int3472 driver is used, the int3472 MFD-cell drivers attach info about
consumers to the clks/regulators when registering these.

This causes problems with the probe ordering wrt drivers for consumers
of these clks/regulators. Since the lookups are only registered when the
provider-driver binds, trying to get these clks/regulators before then
results in a -ENOENT error for clks and a dummy regulator for regulators.

All the sensor ACPI fw-nodes have a _DEP dependency on the INT3472 ACPI
fw-node, so to work around these probe ordering issues the ACPI core /
i2c-code does not instantiate the I2C-clients for any ACPI devices
which have a _DEP dependency on an INT3472 ACPI device until all
_DEP-s are met.

This relies on acpi_dev_clear_dependencies() getting called by the driver
for the _DEP-s when they are ready, add a acpi_dev_clear_dependencies()
call to the discrete.c probe code.

In the tps68470 case calling acpi_dev_clear_dependencies() is already done
by the acpi_gpiochip_add() call done by the driver for the GPIO MFD cell
(The GPIO cell is deliberately the last cell created to make sure the
clk + regulator cells are already instantiated when this happens).

However for proper probe ordering, the clk/regulator cells must not just
be instantiated the must be fully ready (the clks + regulators must be
registered with their subsystems).

Add MODULE_SOFTDEP dependencies for the clk and regulator drivers for
the instantiated MFD-cells so that these are loaded before us and so
that they bind immediately when the platform-devs are instantiated.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
- Only call acpi_dev_clear_dependencies() in the discrete.c case, for the
  tps68470 case this is already done by the acpi_gpiochip_add() for the
  GPIO MFD cell.
---
 drivers/platform/x86/intel/int3472/discrete.c | 1 +
 drivers/platform/x86/intel/int3472/tps68470.c | 6 ++++++
 2 files changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
index ff2bdbb8722c..5b514fa01a97 100644
--- a/drivers/platform/x86/intel/int3472/discrete.c
+++ b/drivers/platform/x86/intel/int3472/discrete.c
@@ -380,6 +380,7 @@  static int skl_int3472_discrete_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	acpi_dev_clear_dependencies(adev);
 	return 0;
 }
 
diff --git a/drivers/platform/x86/intel/int3472/tps68470.c b/drivers/platform/x86/intel/int3472/tps68470.c
index 9c213b8e99a0..e1de1ff40bba 100644
--- a/drivers/platform/x86/intel/int3472/tps68470.c
+++ b/drivers/platform/x86/intel/int3472/tps68470.c
@@ -177,6 +177,11 @@  static int skl_int3472_tps68470_probe(struct i2c_client *client)
 		return device_type;
 	}
 
+	/*
+	 * No acpi_dev_clear_dependencies() here, since the acpi_gpiochip_add()
+	 * for the GPIO cell already does this.
+	 */
+
 	return ret;
 }
 
@@ -210,3 +215,4 @@  module_i2c_driver(int3472_tps68470);
 MODULE_DESCRIPTION("Intel SkyLake INT3472 ACPI TPS68470 Device Driver");
 MODULE_AUTHOR("Daniel Scally <djrscally@gmail.com>");
 MODULE_LICENSE("GPL v2");
+MODULE_SOFTDEP("pre: clk-tps68470 tps68470-regulator");