| Message ID | 20220518182527.1693156-1-ralph.siemsen@linaro.org (mailing list archive) |
|---|---|
| State | Awaiting Upstream, archived |
| Headers | show |
| Series | [v2,1/3] clk: renesas: r9a06g032: Fix UART clkgrp bitsel | expand |
Hi Ralph, Thanks for your patch! On 18 May 2022 19:25 Ralph Siemsen wrote: > There are two UART clock groups, each having a mux to select its > upstream clock source. The register/bit definitions for accessing these > two muxes appear to have been reversed since introduction. Correct them > so as to match the hardware manual. > > Fixes: 4c3d88526eba ("clk: renesas: Renesas R9A06G032 clock driver") > > Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> > --- > v2 changes: > - reverse the comments as well > > drivers/clk/renesas/r9a06g032-clocks.c | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/clk/renesas/r9a06g032-clocks.c > b/drivers/clk/renesas/r9a06g032-clocks.c > index c99942f0e4d4..abc0891fd96d 100644 > --- a/drivers/clk/renesas/r9a06g032-clocks.c > +++ b/drivers/clk/renesas/r9a06g032-clocks.c > @@ -286,8 +286,8 @@ static const struct r9a06g032_clkdesc > r9a06g032_clocks[] = { > .name = "uart_group_012", > .type = K_BITSEL, > .source = 1 + R9A06G032_DIV_UART, > - /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG1_PR2 */ > - .dual.sel = ((0xec / 4) << 5) | 24, > + /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG0_0 */ > + .dual.sel = ((0x34 / 4) << 5) | 30, > .dual.group = 0, > }, > { > @@ -295,8 +295,8 @@ static const struct r9a06g032_clkdesc > r9a06g032_clocks[] = { > .name = "uart_group_34567", > .type = K_BITSEL, > .source = 1 + R9A06G032_DIV_P2_PG, > - /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG0_0 */ > - .dual.sel = ((0x34 / 4) << 5) | 30, > + /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG1_PR2 */ > + .dual.sel = ((0xec / 4) << 5) | 24, > .dual.group = 1, > }, > D_UGATE(CLK_UART0, "clk_uart0", UART_GROUP_012, 0, 0, 0x1b2, 0x1b3, > 0x1b4, 0x1b5), > -- > 2.25.1 Reviewed-by: Phil Edworthy <phil.edworthy@renesas.com> Thanks Phil
On Wed, May 18, 2022 at 8:32 PM Phil Edworthy <phil.edworthy@renesas.com> wrote: > On 18 May 2022 19:25 Ralph Siemsen wrote: > > There are two UART clock groups, each having a mux to select its > > upstream clock source. The register/bit definitions for accessing these > > two muxes appear to have been reversed since introduction. Correct them > > so as to match the hardware manual. > > > > Fixes: 4c3d88526eba ("clk: renesas: Renesas R9A06G032 clock driver") > > > > Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> > > --- > > v2 changes: > > - reverse the comments as well > > Reviewed-by: Phil Edworthy <phil.edworthy@renesas.com> Thanks, will queue in renesas-clk-for-v5.20. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c index c99942f0e4d4..abc0891fd96d 100644 --- a/drivers/clk/renesas/r9a06g032-clocks.c +++ b/drivers/clk/renesas/r9a06g032-clocks.c @@ -286,8 +286,8 @@ static const struct r9a06g032_clkdesc r9a06g032_clocks[] = { .name = "uart_group_012", .type = K_BITSEL, .source = 1 + R9A06G032_DIV_UART, - /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG1_PR2 */ - .dual.sel = ((0xec / 4) << 5) | 24, + /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG0_0 */ + .dual.sel = ((0x34 / 4) << 5) | 30, .dual.group = 0, }, { @@ -295,8 +295,8 @@ static const struct r9a06g032_clkdesc r9a06g032_clocks[] = { .name = "uart_group_34567", .type = K_BITSEL, .source = 1 + R9A06G032_DIV_P2_PG, - /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG0_0 */ - .dual.sel = ((0x34 / 4) << 5) | 30, + /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG1_PR2 */ + .dual.sel = ((0xec / 4) << 5) | 24, .dual.group = 1, }, D_UGATE(CLK_UART0, "clk_uart0", UART_GROUP_012, 0, 0, 0x1b2, 0x1b3, 0x1b4, 0x1b5),
There are two UART clock groups, each having a mux to select its upstream clock source. The register/bit definitions for accessing these two muxes appear to have been reversed since introduction. Correct them so as to match the hardware manual. Fixes: 4c3d88526eba ("clk: renesas: Renesas R9A06G032 clock driver") Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> --- v2 changes: - reverse the comments as well drivers/clk/renesas/r9a06g032-clocks.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)