| Message ID | 20220621233412.506768-5-robert.foss@linaro.org (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | SM8350 Display/GPU clock enablement | expand |
On 22.06.2022 01:34, Robert Foss wrote: > From: Jonathan Marek <jonathan@marek.ca> > > Add support to the SM8350 display clock controller by extending the SM8250 > display clock controller, which is almost identical but has some minor > differences. > > Signed-off-by: Jonathan Marek <jonathan@marek.ca> > Signed-off-by: Robert Foss <robert.foss@linaro.org> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > > Changes since v1 > - Remove comment - Dmitry > > Changes since v2 > - Add my SoB - Bjorn > - Remove CLK_ASSUME_ENABLED_WHEN_UNUSED flag > > Changes since v3 > - Add kconfig dependency on SM_GCC_8350 - Konrad > - Change hex to lowercase - Konrad > - Split from dispcc-sm8250.c implementation > - Switch from .fw_name to .index > > Changes since v4 > - Hex to lowercase - Konrad > - Remove bad match table entries - Konrad > > Changes since v5 > - Reverted split from dispcc-sm8250 > - Re-added tags from v3 > > > drivers/clk/qcom/Kconfig | 4 +-- > drivers/clk/qcom/dispcc-sm8250.c | 60 +++++++++++++++++++++++++++++++- > 2 files changed, 61 insertions(+), 3 deletions(-) > > diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig > index b11235c21952..4c3d1a548b7a 100644 > --- a/drivers/clk/qcom/Kconfig > +++ b/drivers/clk/qcom/Kconfig > @@ -618,11 +618,11 @@ config SM_DISPCC_6125 > splash screen > > config SM_DISPCC_8250 > - tristate "SM8150 and SM8250 Display Clock Controller" > + tristate "SM8150/SM8250/SM8350 Display Clock Controller" > depends on SM_GCC_8150 || SM_GCC_8250 || SM_GCC_8350 > help > Support for the display clock controller on Qualcomm Technologies, Inc > - SM8150 and SM8250 devices. > + SM8150/SM8250/SM8350 devices. > Say Y if you want to support display devices and functionality such as > splash screen. > > diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c > index db9379634fb2..4e101d584115 100644 > --- a/drivers/clk/qcom/dispcc-sm8250.c > +++ b/drivers/clk/qcom/dispcc-sm8250.c > @@ -43,6 +43,10 @@ static struct pll_vco vco_table[] = { > { 249600000, 2000000000, 0 }, > }; > > +static struct pll_vco lucid_5lpe_vco[] = { > + { 249600000, 1750000000, 0 }, > +}; > + > static struct alpha_pll_config disp_cc_pll0_config = { > .l = 0x47, > .alpha = 0xE000, > @@ -1228,6 +1232,7 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = { > { .compatible = "qcom,sc8180x-dispcc" }, > { .compatible = "qcom,sm8150-dispcc" }, > { .compatible = "qcom,sm8250-dispcc" }, > + { .compatible = "qcom,sm8350-dispcc" }, > { } > }; > MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table); > @@ -1258,7 +1263,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev) > return PTR_ERR(regmap); > } > > - /* note: trion == lucid, except for the prepare() op */ > + /* Apply differences for SM8150 and SM8350 */ I think both comments should stay, as the one you're adding doesn't explain the BUILD_BUG_ON() Konrad > BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID); > if (of_device_is_compatible(pdev->dev.of_node, "qcom,sc8180x-dispcc") || > of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) { > @@ -1270,6 +1275,59 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev) > disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024; > disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0; > disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops; > + } else if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) { > + static struct clk_rcg2 * const rcgs[] = { > + &disp_cc_mdss_byte0_clk_src, > + &disp_cc_mdss_byte1_clk_src, > + &disp_cc_mdss_dp_aux1_clk_src, > + &disp_cc_mdss_dp_aux_clk_src, > + &disp_cc_mdss_dp_link1_clk_src, > + &disp_cc_mdss_dp_link_clk_src, > + &disp_cc_mdss_dp_pixel1_clk_src, > + &disp_cc_mdss_dp_pixel2_clk_src, > + &disp_cc_mdss_dp_pixel_clk_src, > + &disp_cc_mdss_esc0_clk_src, > + &disp_cc_mdss_mdp_clk_src, > + &disp_cc_mdss_pclk0_clk_src, > + &disp_cc_mdss_pclk1_clk_src, > + &disp_cc_mdss_rot_clk_src, > + &disp_cc_mdss_vsync_clk_src, > + }; > + static struct clk_regmap_div * const divs[] = { > + &disp_cc_mdss_byte0_div_clk_src, > + &disp_cc_mdss_byte1_div_clk_src, > + &disp_cc_mdss_dp_link1_div_clk_src, > + &disp_cc_mdss_dp_link_div_clk_src, > + }; > + unsigned int i; > + static bool offset_applied; > + > + /* only apply the offsets once (in case of deferred probe) */ > + if (!offset_applied) { > + for (i = 0; i < ARRAY_SIZE(rcgs); i++) > + rcgs[i]->cmd_rcgr -= 4; > + > + for (i = 0; i < ARRAY_SIZE(divs); i++) { > + divs[i]->reg -= 4; > + divs[i]->width = 4; > + } > + > + disp_cc_mdss_ahb_clk.halt_reg -= 4; > + disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4; > + > + offset_applied = true; > + } > + > + disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0; > + > + disp_cc_pll0_config.config_ctl_hi1_val = 0x2a9a699c; > + disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000; > + disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops; > + disp_cc_pll0.vco_table = lucid_5lpe_vco; > + disp_cc_pll1_config.config_ctl_hi1_val = 0x2a9a699c; > + disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000; > + disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops; > + disp_cc_pll1.vco_table = lucid_5lpe_vco; > } > > clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
On Wed, 22 Jun 2022 at 12:22, Konrad Dybcio <konrad.dybcio@somainline.org> wrote: > > > > On 22.06.2022 01:34, Robert Foss wrote: > > From: Jonathan Marek <jonathan@marek.ca> > > > > Add support to the SM8350 display clock controller by extending the SM8250 > > display clock controller, which is almost identical but has some minor > > differences. > > > > Signed-off-by: Jonathan Marek <jonathan@marek.ca> > > Signed-off-by: Robert Foss <robert.foss@linaro.org> > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > --- > > > > Changes since v1 > > - Remove comment - Dmitry > > > > Changes since v2 > > - Add my SoB - Bjorn > > - Remove CLK_ASSUME_ENABLED_WHEN_UNUSED flag > > > > Changes since v3 > > - Add kconfig dependency on SM_GCC_8350 - Konrad > > - Change hex to lowercase - Konrad > > - Split from dispcc-sm8250.c implementation > > - Switch from .fw_name to .index > > > > Changes since v4 > > - Hex to lowercase - Konrad > > - Remove bad match table entries - Konrad > > > > Changes since v5 > > - Reverted split from dispcc-sm8250 > > - Re-added tags from v3 > > > > > > drivers/clk/qcom/Kconfig | 4 +-- > > drivers/clk/qcom/dispcc-sm8250.c | 60 +++++++++++++++++++++++++++++++- > > 2 files changed, 61 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig > > index b11235c21952..4c3d1a548b7a 100644 > > --- a/drivers/clk/qcom/Kconfig > > +++ b/drivers/clk/qcom/Kconfig > > @@ -618,11 +618,11 @@ config SM_DISPCC_6125 > > splash screen > > > > config SM_DISPCC_8250 > > - tristate "SM8150 and SM8250 Display Clock Controller" > > + tristate "SM8150/SM8250/SM8350 Display Clock Controller" > > depends on SM_GCC_8150 || SM_GCC_8250 > || SM_GCC_8350 Ack > > > help > > Support for the display clock controller on Qualcomm Technologies, Inc > > - SM8150 and SM8250 devices. > > + SM8150/SM8250/SM8350 devices. > > Say Y if you want to support display devices and functionality such as > > splash screen. > > > > diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c > > index db9379634fb2..4e101d584115 100644 > > --- a/drivers/clk/qcom/dispcc-sm8250.c > > +++ b/drivers/clk/qcom/dispcc-sm8250.c > > @@ -43,6 +43,10 @@ static struct pll_vco vco_table[] = { > > { 249600000, 2000000000, 0 }, > > }; > > > > +static struct pll_vco lucid_5lpe_vco[] = { > > + { 249600000, 1750000000, 0 }, > > +}; > > + > > static struct alpha_pll_config disp_cc_pll0_config = { > > .l = 0x47, > > .alpha = 0xE000, > > @@ -1228,6 +1232,7 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = { > > { .compatible = "qcom,sc8180x-dispcc" }, > > { .compatible = "qcom,sm8150-dispcc" }, > > { .compatible = "qcom,sm8250-dispcc" }, > > + { .compatible = "qcom,sm8350-dispcc" }, > > { } > > }; > > MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table); > > @@ -1258,7 +1263,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev) > > return PTR_ERR(regmap); > > } > > > > - /* note: trion == lucid, except for the prepare() op */ > > + /* Apply differences for SM8150 and SM8350 */ > I think both comments should stay, as the one you're adding doesn't explain the BUILD_BUG_ON() Ack > > > Konrad > > BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID); > > if (of_device_is_compatible(pdev->dev.of_node, "qcom,sc8180x-dispcc") || > > of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) { > > @@ -1270,6 +1275,59 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev) > > disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024; > > disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0; > > disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops; > > + } else if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) { > > + static struct clk_rcg2 * const rcgs[] = { > > + &disp_cc_mdss_byte0_clk_src, > > + &disp_cc_mdss_byte1_clk_src, > > + &disp_cc_mdss_dp_aux1_clk_src, > > + &disp_cc_mdss_dp_aux_clk_src, > > + &disp_cc_mdss_dp_link1_clk_src, > > + &disp_cc_mdss_dp_link_clk_src, > > + &disp_cc_mdss_dp_pixel1_clk_src, > > + &disp_cc_mdss_dp_pixel2_clk_src, > > + &disp_cc_mdss_dp_pixel_clk_src, > > + &disp_cc_mdss_esc0_clk_src, > > + &disp_cc_mdss_mdp_clk_src, > > + &disp_cc_mdss_pclk0_clk_src, > > + &disp_cc_mdss_pclk1_clk_src, > > + &disp_cc_mdss_rot_clk_src, > > + &disp_cc_mdss_vsync_clk_src, > > + }; > > + static struct clk_regmap_div * const divs[] = { > > + &disp_cc_mdss_byte0_div_clk_src, > > + &disp_cc_mdss_byte1_div_clk_src, > > + &disp_cc_mdss_dp_link1_div_clk_src, > > + &disp_cc_mdss_dp_link_div_clk_src, > > + }; > > + unsigned int i; > > + static bool offset_applied; > > + > > + /* only apply the offsets once (in case of deferred probe) */ > > + if (!offset_applied) { > > + for (i = 0; i < ARRAY_SIZE(rcgs); i++) > > + rcgs[i]->cmd_rcgr -= 4; > > + > > + for (i = 0; i < ARRAY_SIZE(divs); i++) { > > + divs[i]->reg -= 4; > > + divs[i]->width = 4; > > + } > > + > > + disp_cc_mdss_ahb_clk.halt_reg -= 4; > > + disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4; > > + > > + offset_applied = true; > > + } > > + > > + disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0; > > + > > + disp_cc_pll0_config.config_ctl_hi1_val = 0x2a9a699c; > > + disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000; > > + disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops; > > + disp_cc_pll0.vco_table = lucid_5lpe_vco; > > + disp_cc_pll1_config.config_ctl_hi1_val = 0x2a9a699c; > > + disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000; > > + disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops; > > + disp_cc_pll1.vco_table = lucid_5lpe_vco; > > } > > > > clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index b11235c21952..4c3d1a548b7a 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -618,11 +618,11 @@ config SM_DISPCC_6125 splash screen config SM_DISPCC_8250 - tristate "SM8150 and SM8250 Display Clock Controller" + tristate "SM8150/SM8250/SM8350 Display Clock Controller" depends on SM_GCC_8150 || SM_GCC_8250 help Support for the display clock controller on Qualcomm Technologies, Inc - SM8150 and SM8250 devices. + SM8150/SM8250/SM8350 devices. Say Y if you want to support display devices and functionality such as splash screen. diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c index db9379634fb2..4e101d584115 100644 --- a/drivers/clk/qcom/dispcc-sm8250.c +++ b/drivers/clk/qcom/dispcc-sm8250.c @@ -43,6 +43,10 @@ static struct pll_vco vco_table[] = { { 249600000, 2000000000, 0 }, }; +static struct pll_vco lucid_5lpe_vco[] = { + { 249600000, 1750000000, 0 }, +}; + static struct alpha_pll_config disp_cc_pll0_config = { .l = 0x47, .alpha = 0xE000, @@ -1228,6 +1232,7 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = { { .compatible = "qcom,sc8180x-dispcc" }, { .compatible = "qcom,sm8150-dispcc" }, { .compatible = "qcom,sm8250-dispcc" }, + { .compatible = "qcom,sm8350-dispcc" }, { } }; MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table); @@ -1258,7 +1263,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev) return PTR_ERR(regmap); } - /* note: trion == lucid, except for the prepare() op */ + /* Apply differences for SM8150 and SM8350 */ BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID); if (of_device_is_compatible(pdev->dev.of_node, "qcom,sc8180x-dispcc") || of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) { @@ -1270,6 +1275,59 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev) disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024; disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0; disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops; + } else if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) { + static struct clk_rcg2 * const rcgs[] = { + &disp_cc_mdss_byte0_clk_src, + &disp_cc_mdss_byte1_clk_src, + &disp_cc_mdss_dp_aux1_clk_src, + &disp_cc_mdss_dp_aux_clk_src, + &disp_cc_mdss_dp_link1_clk_src, + &disp_cc_mdss_dp_link_clk_src, + &disp_cc_mdss_dp_pixel1_clk_src, + &disp_cc_mdss_dp_pixel2_clk_src, + &disp_cc_mdss_dp_pixel_clk_src, + &disp_cc_mdss_esc0_clk_src, + &disp_cc_mdss_mdp_clk_src, + &disp_cc_mdss_pclk0_clk_src, + &disp_cc_mdss_pclk1_clk_src, + &disp_cc_mdss_rot_clk_src, + &disp_cc_mdss_vsync_clk_src, + }; + static struct clk_regmap_div * const divs[] = { + &disp_cc_mdss_byte0_div_clk_src, + &disp_cc_mdss_byte1_div_clk_src, + &disp_cc_mdss_dp_link1_div_clk_src, + &disp_cc_mdss_dp_link_div_clk_src, + }; + unsigned int i; + static bool offset_applied; + + /* only apply the offsets once (in case of deferred probe) */ + if (!offset_applied) { + for (i = 0; i < ARRAY_SIZE(rcgs); i++) + rcgs[i]->cmd_rcgr -= 4; + + for (i = 0; i < ARRAY_SIZE(divs); i++) { + divs[i]->reg -= 4; + divs[i]->width = 4; + } + + disp_cc_mdss_ahb_clk.halt_reg -= 4; + disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4; + + offset_applied = true; + } + + disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0; + + disp_cc_pll0_config.config_ctl_hi1_val = 0x2a9a699c; + disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000; + disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops; + disp_cc_pll0.vco_table = lucid_5lpe_vco; + disp_cc_pll1_config.config_ctl_hi1_val = 0x2a9a699c; + disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000; + disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops; + disp_cc_pll1.vco_table = lucid_5lpe_vco; } clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);