@@ -368,6 +368,15 @@ config COMMON_CLK_RS9_PCIE
This driver supports the Renesas 9-series PCIe clock generator
models 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ.
+config COMMON_CLK_SI521XX
+ tristate "Clock driver for SkyWorks Si521xx PCIe clock generators"
+ depends on I2C
+ depends on OF
+ select REGMAP_I2C
+ help
+ This driver supports the SkyWorks Si521xx PCIe clock generator
+ models Si52144/Si52146/Si52147.
+
config COMMON_CLK_VC5
tristate "Clock driver for IDT VersaClock 5,6 devices"
depends on I2C
@@ -72,6 +72,7 @@ obj-$(CONFIG_COMMON_CLK_TPS68470) += clk-tps68470.o
obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
obj-$(CONFIG_COMMON_CLK_RS9_PCIE) += clk-renesas-pcie.o
+obj-$(CONFIG_COMMON_CLK_SI521XX) += clk-si521xx.o
obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o
obj-$(CONFIG_COMMON_CLK_VC7) += clk-versaclock7.o
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
new file mode 100644
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Skyworks Si521xx PCIe clock generator driver
+ *
+ * The following series can be supported:
+ * - Si52144 - 4x DIFF
+ * - Si52146 - 6x DIFF
+ * - Si52147 - 9x DIFF
+ * Currently tested:
+ * - Si52144
+ *
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+#include <linux/bitrev.h>
+#include <linux/clk-provider.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+/* OE1 and OE2 register */
+#define SI521XX_REG_OE(n) (((n) & 0x1) + 1)
+#define SI521XX_REG_ID 0x3
+#define SI521XX_REG_ID_PROG GENMASK(7, 4)
+#define SI521XX_REG_ID_VENDOR GENMASK(3, 0)
+#define SI521XX_REG_BC 0x4
+#define SI521XX_REG_DA 0x5
+#define SI521XX_REG_DA_AMP_SEL BIT(7)
+#define SI521XX_REG_DA_AMP_MASK GENMASK(6, 4)
+#define SI521XX_REG_DA_AMP_MIN 300000
+#define SI521XX_REG_DA_AMP_DEFAULT 800000
+#define SI521XX_REG_DA_AMP_MAX 1000000
+#define SI521XX_REG_DA_AMP_STEP 100000
+#define SI521XX_REG_DA_AMP(UV) \
+ FIELD_PREP(SI521XX_REG_DA_AMP_MASK, \
+ ((UV) - SI521XX_REG_DA_AMP_MIN) / SI521XX_REG_DA_AMP_STEP)
+#define SI521XX_REG_DA_UNKNOWN BIT(3) /* Always set */
+
+/* Count of populated OE bits in control register ref, 1 and 2 */
+#define SI521XX_OE_MAP(cr1, cr2) (((cr2) << 8) | (cr1))
+#define SI521XX_OE_MAP_GET_OE(oe, map) (((map) >> (((oe) - 1) * 8)) & 0xff)
+
+#define SI521XX_DIFF_MULT 4
+#define SI521XX_DIFF_DIV 1
+
+/* Supported Skyworks Si521xx models. */
+enum si521xx_model {
+ SI52144 = 0x44,
+ SI52146 = 0x46,
+ SI52147 = 0x47,
+};
+
+struct si521xx;
+
+struct si_clk {
+ struct clk_hw hw;
+ struct si521xx *si;
+ u8 reg;
+ u8 bit;
+};
+
+struct si521xx {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct si_clk clk_dif[9];
+ u16 chip_info;
+ u8 pll_amplitude;
+};
+
+/*
+ * Si521xx i2c regmap
+ */
+static const struct regmap_range si521xx_readable_ranges[] = {
+ regmap_reg_range(SI521XX_REG_OE(0), SI521XX_REG_DA),
+};
+
+static const struct regmap_access_table si521xx_readable_table = {
+ .yes_ranges = si521xx_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(si521xx_readable_ranges),
+};
+
+static const struct regmap_range si521xx_writeable_ranges[] = {
+ regmap_reg_range(SI521XX_REG_OE(0), SI521XX_REG_OE(1)),
+ regmap_reg_range(SI521XX_REG_BC, SI521XX_REG_DA),
+};
+
+static const struct regmap_access_table si521xx_writeable_table = {
+ .yes_ranges = si521xx_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(si521xx_writeable_ranges),
+};
+
+static int si521xx_regmap_i2c_write(void *context, unsigned int reg,
+ unsigned int val)
+{
+ struct i2c_client *i2c = context;
+ const u8 data[3] = { reg, 1, val };
+ const int count = ARRAY_SIZE(data);
+ int ret;
+
+ ret = i2c_master_send(i2c, data, count);
+ if (ret == count)
+ return 0;
+ else if (ret < 0)
+ return ret;
+ else
+ return -EIO;
+}
+
+static int si521xx_regmap_i2c_read(void *context, unsigned int reg,
+ unsigned int *val)
+{
+ struct i2c_client *i2c = context;
+ struct i2c_msg xfer[2];
+ u8 txdata = reg;
+ u8 rxdata[2];
+ int ret;
+
+ xfer[0].addr = i2c->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = 1;
+ xfer[0].buf = (void *)&txdata;
+
+ xfer[1].addr = i2c->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = 2;
+ xfer[1].buf = (void *)rxdata;
+
+ ret = i2c_transfer(i2c->adapter, xfer, 2);
+ if (ret < 0)
+ return ret;
+ if (ret != 2)
+ return -EIO;
+
+ /*
+ * Byte 0 is transfer length, which is always 1 due
+ * to BCP register programming to 1 in si521xx_probe(),
+ * ignore it and use data from Byte 1.
+ */
+ *val = rxdata[1];
+ return 0;
+}
+
+static const struct regmap_config si521xx_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_NONE,
+ .max_register = SI521XX_REG_DA,
+ .rd_table = &si521xx_readable_table,
+ .wr_table = &si521xx_writeable_table,
+ .reg_write = si521xx_regmap_i2c_write,
+ .reg_read = si521xx_regmap_i2c_read,
+};
+
+static unsigned long si521xx_diff_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ unsigned long long rate;
+
+ rate = (unsigned long long)parent_rate * SI521XX_DIFF_MULT;
+ do_div(rate, SI521XX_DIFF_DIV);
+ return (unsigned long)rate;
+}
+
+static long si521xx_diff_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long best_parent;
+
+ best_parent = (rate / SI521XX_DIFF_MULT) * SI521XX_DIFF_DIV;
+ *prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent);
+
+ return (*prate / SI521XX_DIFF_DIV) * SI521XX_DIFF_MULT;
+}
+
+static int si521xx_diff_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ /*
+ * We must report success but we can do so unconditionally because
+ * si521xx_diff_round_rate returns values that ensure this call is a
+ * nop.
+ */
+
+ return 0;
+}
+
+#define to_si521xx_clk(_hw) container_of(_hw, struct si_clk, hw)
+
+static int si521xx_diff_prepare(struct clk_hw *hw)
+{
+ struct si_clk *si_clk = to_si521xx_clk(hw);
+ struct si521xx *si = si_clk->si;
+
+ regmap_set_bits(si->regmap, SI521XX_REG_OE(si_clk->reg), si_clk->bit);
+
+ return 0;
+}
+
+static void si521xx_diff_unprepare(struct clk_hw *hw)
+{
+ struct si_clk *si_clk = to_si521xx_clk(hw);
+ struct si521xx *si = si_clk->si;
+
+ regmap_clear_bits(si->regmap, SI521XX_REG_OE(si_clk->reg), si_clk->bit);
+}
+
+const struct clk_ops si521xx_diff_clk_ops = {
+ .round_rate = si521xx_diff_round_rate,
+ .set_rate = si521xx_diff_set_rate,
+ .recalc_rate = si521xx_diff_recalc_rate,
+ .prepare = si521xx_diff_prepare,
+ .unprepare = si521xx_diff_unprepare,
+};
+
+static int si521xx_get_common_config(struct si521xx *si)
+{
+ struct i2c_client *client = si->client;
+ struct device_node *np = client->dev.of_node;
+ unsigned int amp;
+ int ret;
+
+ /* Set defaults */
+ si->pll_amplitude = SI521XX_REG_DA_AMP(SI521XX_REG_DA_AMP_DEFAULT);
+
+ /* Output clock amplitude */
+ ret = of_property_read_u32(np, "skyworks,out-amplitude-microvolt",
+ &);
+ if (!ret) {
+ if (amp < SI521XX_REG_DA_AMP_MIN || amp > SI521XX_REG_DA_AMP_MAX ||
+ amp % SI521XX_REG_DA_AMP_STEP) {
+ return dev_err_probe(&client->dev, -EINVAL,
+ "Invalid skyworks,out-amplitude-microvolt value\n");
+ }
+ si->pll_amplitude = SI521XX_REG_DA_AMP(amp);
+ }
+
+ return 0;
+}
+
+static void si521xx_update_config(struct si521xx *si)
+{
+ /* If amplitude is non-default, update it. */
+ if (si->pll_amplitude == SI521XX_REG_DA_AMP(SI521XX_REG_DA_AMP_DEFAULT))
+ return;
+
+ regmap_update_bits(si->regmap, SI521XX_REG_DA,
+ SI521XX_REG_DA_AMP_MASK, si->pll_amplitude);
+}
+
+static void si521xx_diff_idx_to_reg_bit(const u16 chip_info, const int idx,
+ struct si_clk *clk)
+{
+ unsigned long mask;
+ int oe, b, ctr = 0;
+
+ for (oe = 1; oe <= 2; oe++) {
+ mask = bitrev8(SI521XX_OE_MAP_GET_OE(oe, chip_info));
+ for_each_set_bit(b, &mask, 8) {
+ if (ctr++ != idx)
+ continue;
+ clk->reg = SI521XX_REG_OE(oe);
+ clk->bit = 7 - b;
+ return;
+ }
+ }
+}
+
+static struct clk_hw *
+si521xx_of_clk_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct si521xx *si = data;
+ unsigned int idx = clkspec->args[0];
+
+ return &si->clk_dif[idx].hw;
+}
+
+static int si521xx_probe(struct i2c_client *client)
+{
+ const u16 chip_info = (u16)(uintptr_t)device_get_match_data(&client->dev);
+ const struct clk_parent_data clk_parent_data = { .index = 0 };
+ struct si521xx *si;
+ unsigned char name[6] = "DIFF0";
+ struct clk_init_data init = {};
+ int i, ret;
+
+ if (!chip_info)
+ return -EINVAL;
+
+ si = devm_kzalloc(&client->dev, sizeof(*si), GFP_KERNEL);
+ if (!si)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, si);
+ si->client = client;
+
+ /* Fetch common configuration from DT (if specified) */
+ ret = si521xx_get_common_config(si);
+ if (ret)
+ return ret;
+
+ si->regmap = devm_regmap_init(&client->dev, NULL, client,
+ &si521xx_regmap_config);
+ if (IS_ERR(si->regmap))
+ return dev_err_probe(&client->dev, PTR_ERR(si->regmap),
+ "Failed to allocate register map\n");
+
+ /* Always read back 1 Byte via I2C */
+ ret = regmap_write(si->regmap, SI521XX_REG_BC, 1);
+ if (ret < 0)
+ return ret;
+
+ /* Register clock */
+ for (i = 0; i < hweight16(chip_info); i++) {
+ memset(&init, 0, sizeof(init));
+ snprintf(name, 6, "DIFF%d", i);
+ init.name = name;
+ init.ops = &si521xx_diff_clk_ops;
+ init.parent_data = &clk_parent_data;
+ init.num_parents = 1;
+ init.flags = CLK_SET_RATE_PARENT;
+
+ si->clk_dif[i].hw.init = &init;
+ si->clk_dif[i].si = si;
+
+ si521xx_diff_idx_to_reg_bit(chip_info, i, &si->clk_dif[i]);
+
+ ret = devm_clk_hw_register(&client->dev, &si->clk_dif[i].hw);
+ if (ret)
+ return ret;
+ }
+
+ ret = devm_of_clk_add_hw_provider(&client->dev, si521xx_of_clk_get, si);
+ if (!ret)
+ si521xx_update_config(si);
+
+ return ret;
+}
+
+static int __maybe_unused si521xx_suspend(struct device *dev)
+{
+ struct si521xx *si = dev_get_drvdata(dev);
+
+ regcache_cache_only(si->regmap, true);
+ regcache_mark_dirty(si->regmap);
+
+ return 0;
+}
+
+static int __maybe_unused si521xx_resume(struct device *dev)
+{
+ struct si521xx *si = dev_get_drvdata(dev);
+ int ret;
+
+ regcache_cache_only(si->regmap, false);
+ ret = regcache_sync(si->regmap);
+ if (ret)
+ dev_err(dev, "Failed to restore register map: %d\n", ret);
+ return ret;
+}
+
+static const struct i2c_device_id si521xx_id[] = {
+ { "si52144", .driver_data = SI521XX_OE_MAP(0x5, 0xc0) },
+ { "si52146", .driver_data = SI521XX_OE_MAP(0x15, 0xe0) },
+ { "si52147", .driver_data = SI521XX_OE_MAP(0x17, 0xf8) },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, si521xx_id);
+
+static const struct of_device_id clk_si521xx_of_match[] = {
+ { .compatible = "skyworks,si52144", .data = (void *)SI521XX_OE_MAP(0x5, 0xc0) },
+ { .compatible = "skyworks,si52146", .data = (void *)SI521XX_OE_MAP(0x15, 0xe0) },
+ { .compatible = "skyworks,si52147", .data = (void *)SI521XX_OE_MAP(0x15, 0xf8) },
+ { }
+};
+MODULE_DEVICE_TABLE(of, clk_si521xx_of_match);
+
+static SIMPLE_DEV_PM_OPS(si521xx_pm_ops, si521xx_suspend, si521xx_resume);
+
+static struct i2c_driver si521xx_driver = {
+ .driver = {
+ .name = "clk-si521xx",
+ .pm = &si521xx_pm_ops,
+ .of_match_table = clk_si521xx_of_match,
+ },
+ .probe_new = si521xx_probe,
+ .id_table = si521xx_id,
+};
+module_i2c_driver(si521xx_driver);
+
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_DESCRIPTION("Skyworks Si521xx PCIe clock generator driver");
+MODULE_LICENSE("GPL");
Add driver for the Skyworks Si521xx PCIe clock generators. Supported models are Si52144/Si52146/Si52147, tested model is Si52144. It should be possible to add Si5213x series as well. Signed-off-by: Marek Vasut <marex@denx.de> --- Cc: Michael Turquette <mturquette@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: devicetree@vger.kernel.org To: linux-clk@vger.kernel.org --- drivers/clk/Kconfig | 9 + drivers/clk/Makefile | 1 + drivers/clk/clk-si521xx.c | 394 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 404 insertions(+) create mode 100644 drivers/clk/clk-si521xx.c