diff mbox series

[v3,1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings

Message ID 20230403103257.328954-2-biju.das.jz@bp.renesas.com (mailing list archive)
State Superseded, archived
Headers show
Series Add Versa3 clock generator support | expand

Commit Message

Biju Das April 3, 2023, 10:32 a.m. UTC
Document Renesas versa3 clock generator(5P35023) bindings.

The 5P35023 is a VersaClock programmable clock generator and
is designed for low-power, consumer, and high-performance PCI
Express applications. The 5P35023 device is a three PLL
architecture design, and each PLL is individually programmable
and allowing for up to 6 unique frequency outputs.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
v2->v3:
 * Added Rb tag from Krzysztof Kozlowski
 * Removed | from Link to data sheet.
 * Dropped stray blank line from example.
 * Updated example section for assigned-clocks to mach same alignment
   with assigned-clock-rates. This is trivial change so retained the
   Rb tag.
RFC->v2:
 * Renamed the filename to match with compatible
 * Added maintainers entry after title
 * Removed the wrapping for the link to data sheet.
 * Removed reg description
 * Removed clock names
 * Replaced minItems->maxItems in renesas,settings property
 * Dropped assigned-clocks, assigned-clock-rates
 * Dropped renesas,clock-divider-read-only and renesas,clock-flags
 * Drooped clock handle part from example
 * Dropped reg from example.
 * Dropped consumer example
---
 .../bindings/clock/renesas,5p35023.yaml       | 86 +++++++++++++++++++
 1 file changed, 86 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/renesas,5p35023.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml
new file mode 100644
index 000000000000..839648e753d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml
@@ -0,0 +1,86 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,5p35023.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas 5p35023 VersaClock 3 programmable I2C clock generator
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  The 5P35023 is a VersaClock programmable clock generator and
+  is designed for low-power, consumer, and high-performance PCI
+  express applications. The 5P35023 device is a three PLL
+  architecture design, and each PLL is individually programmable
+  and allowing for up to 6 unique frequency outputs.
+
+  An internal OTP memory allows the user to store the configuration
+  in the device. After power up, the user can change the device register
+  settings through the I2C interface when I2C mode is selected.
+
+  The driver can read a full register map from the DT, and will use that
+  register map to initialize the attached part (via I2C) when the system
+  boots. Any configuration not supported by the common clock framework
+  must be done via the full register map, including optimized settings.
+
+  Link to datasheet:
+  https://www.renesas.com/us/en/products/clocks-timing/clock-generation/programmable-clocks/5p35023-versaclock-3s-programmable-clock-generator
+
+properties:
+  compatible:
+    enum:
+      - renesas,5p35023
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  renesas,settings:
+    description: Optional, complete register map of the device.
+      Optimized settings for the device must be provided in full
+      and are written during initialization.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 37
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        versa3: clock-generator@68 {
+            compatible = "renesas,5p35023";
+            reg = <0x68>;
+            #clock-cells = <1>;
+
+            clocks = <&x1_x2>;
+
+            renesas,settings = [
+                80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf
+                00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6
+                80 b0 45 c4 95
+            ];
+
+            assigned-clocks = <&versa3 0>, <&versa3 1>,
+                              <&versa3 2>, <&versa3 3>,
+                              <&versa3 4>, <&versa3 5>;
+            assigned-clock-rates = <12288000>, <25000000>,
+                                   <12000000>, <11289600>,
+                                   <11289600>, <24000000>;
+        };
+    };