Message ID | 20230406200723.552644-8-brgl@bgdev.pl (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | arm64: dts: qcom: sa8775p: add more IOMMUs | expand |
On 6.04.2023 22:07, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > Add the GPU IOMMU for sa8775p-based platforms. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > --- > arch/arm64/boot/dts/qcom/sa8775p.dtsi | 36 +++++++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi > index f799cb5abb87..f46c1a73abdb 100644 > --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi > +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi > @@ -7,6 +7,7 @@ > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/clock/qcom,rpmh.h> > #include <dt-bindings/clock/qcom,sa8775p-gcc.h> > +#include <dt-bindings/clock/qcom,sa8775p-gpucc.h> > #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> > #include <dt-bindings/power/qcom-rpmpd.h> > #include <dt-bindings/soc/qcom,rpmh-rsc.h> > @@ -605,6 +606,41 @@ gpucc: clock-controller@3d90000 { > #power-domain-cells = <1>; > }; > > + kgsl_smmu: iommu@3da0000 { > + compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500"; No "qcom,adreno"? Does this one not support per-process pagetables? Do you have a working GPU setup to confirm that? Konrad > + reg = <0x0 0x03da0000 0x0 0x20000>; > + #iommu-cells = <2>; > + #global-interrupts = <2>; > + dma-coherent; > + power-domains = <&gpucc GPU_CC_CX_GDSC>; > + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, > + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, > + <&gpucc GPU_CC_AHB_CLK>, > + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, > + <&gpucc GPU_CC_CX_GMU_CLK>, > + <&gpucc GPU_CC_HUB_CX_INT_CLK>, > + <&gpucc GPU_CC_HUB_AON_CLK>; > + clock-names = "gcc_gpu_memnoc_gfx_clk", > + "gcc_gpu_snoc_dvm_gfx_clk", > + "gpu_cc_ahb_clk", > + "gpu_cc_hlos1_vote_gpu_smmu_clk", > + "gpu_cc_cx_gmu_clk", > + "gpu_cc_hub_cx_int_clk", > + "gpu_cc_hub_aon_clk"; > + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > pdc: interrupt-controller@b220000 { > compatible = "qcom,sa8775p-pdc", "qcom,pdc"; > reg = <0x0 0x0b220000 0x0 0x30000>,
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index f799cb5abb87..f46c1a73abdb 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sa8775p-gcc.h> +#include <dt-bindings/clock/qcom,sa8775p-gpucc.h> #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -605,6 +606,41 @@ gpucc: clock-controller@3d90000 { #power-domain-cells = <1>; }; + kgsl_smmu: iommu@3da0000 { + compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x03da0000 0x0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + dma-coherent; + power-domains = <&gpucc GPU_CC_CX_GDSC>; + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sa8775p-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x30000>,