From patchwork Thu Aug 3 12:04:03 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 13339935 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 25870C04E69 for ; Thu, 3 Aug 2023 12:04:36 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235827AbjHCMEe (ORCPT ); Thu, 3 Aug 2023 08:04:34 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:54806 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234544AbjHCME1 (ORCPT ); Thu, 3 Aug 2023 08:04:27 -0400 Received: from mail-wm1-x32b.google.com (mail-wm1-x32b.google.com [IPv6:2a00:1450:4864:20::32b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C1235358B for ; Thu, 3 Aug 2023 05:04:17 -0700 (PDT) Received: by mail-wm1-x32b.google.com with SMTP id 5b1f17b1804b1-3fe110de46dso8899485e9.1 for ; Thu, 03 Aug 2023 05:04:17 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1691064256; x=1691669056; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=/ROjA7hMnkAvdnfkhv7p7unINoiSUApyrJY4bU6BpUw=; b=KGioKLl3B1By5UVD6HXIzAVMS0aJHUaHOmj24kTUSUGRDtV12cBMsnuN2NviPrGiFn X+0S6TdR9FqrR3BebLXvMw5TS7VkP1OChMgWecypttOXJLOMNjrws8R9/Uae3tjUa36C SxD7qA373cKIJ4cXNkhlXTKNplwDSUO4zRKz4gUbRLgEFuqd5r2TxAKKF1s+6kApW8Of 5t8IfR39DTqdzOyK8vQxuBRIGbY7J/LBWtzIzJuYjbPEQ7i/Gu6Ph0xxnR0li+h91xjm xPbGhssTGy4nKGxNP6BNyQ2rZyVFwDJvfibdNv/Nwn6ifk8I8OfCtcJx3uDI12YPYb91 n08Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1691064256; x=1691669056; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=/ROjA7hMnkAvdnfkhv7p7unINoiSUApyrJY4bU6BpUw=; b=aDPeFv3S3+cSsuqHPO15qtgtwyv0sW4Uf2EN8ZMsdyZkCyL/G8pjRoZfGQFQrZ3Of0 WZoJCgQlKPu8/kYOtw0AxlQuKQM4rnN9WgQeYkgY+Eq7k1QhCQo1LnN83oMpVPIyVHBc cjCv7eYGf2PlFKbupFDK+Fo/A9p9OXlNW6yFDOR++bGQSkn4ZJO9FtOjACnukIPwEJlF kAQmqcf5BThphB/4QujSgxoeg2XA7w4xTe1UpVUGRYaGxsQetQEP5T6jSK45VW3mB9LA K6yeIRNRTcFXM/UxCX5P72f+WYIe7pz6T1ggB3avEYbJyECMvUfSZN2aADKGTvUKsfK9 4RIg== X-Gm-Message-State: ABy/qLYBYdsehcMr+SYwCvvPlHb5OFRPQVFuUn2SyA6efMtW+nbYP2aN masIp/4EcqQ3bKZiZd9F87dl2A== X-Google-Smtp-Source: APBJJlHZXk/XOEyoDVquCUZz1MldFv1pH3EjERK9ya4rwYLY73mbi5xtvDRycokunuKoALk9VU1NeQ== X-Received: by 2002:a05:600c:2253:b0:3fe:21a9:2feb with SMTP id a19-20020a05600c225300b003fe21a92febmr7374170wmm.33.1691064256163; Thu, 03 Aug 2023 05:04:16 -0700 (PDT) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:52eb:f6ff:feb3:451a]) by smtp.gmail.com with ESMTPSA id d10-20020a056000114a00b00317046f21f9sm21487465wrx.114.2023.08.03.05.04.14 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 03 Aug 2023 05:04:15 -0700 (PDT) From: Neil Armstrong Date: Thu, 03 Aug 2023 14:04:03 +0200 Subject: [PATCH v7 9/9] arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper MIME-Version: 1.0 Message-Id: <20230803-amlogic-v6-4-upstream-dsi-ccf-vim3-v7-9-762219fc5b28@linaro.org> References: <20230803-amlogic-v6-4-upstream-dsi-ccf-vim3-v7-0-762219fc5b28@linaro.org> In-Reply-To: <20230803-amlogic-v6-4-upstream-dsi-ccf-vim3-v7-0-762219fc5b28@linaro.org> To: Jerome Brunet , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Kevin Hilman , Martin Blumenstingl , David Airlie , Daniel Vetter , Jagan Teki , Nicolas Belin Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org, dri-devel@lists.freedesktop.org, Neil Armstrong , "Lukas F. Hartmann" X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=9641; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=tIpvKy3/zQUSKoo3au+mFW9qsGjNTajV3C/7kQ1qRIA=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBky5eyb3vJZIQceselneJrkt8e4qWFoxRAmktgTMB4 aEWv6ziJAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZMuXsgAKCRB33NvayMhJ0Rn9EA DOVZLrUMkbzg0DH3+ZlSpv/5A5GwTKx92gvbKNTpZBhnUEmTtaFWXAXMFN5plCcGXI0bhC21VGOi/K C19B5g5UJr5YMbYd7g7Hr+04/nelJM31nu2d8UYVMYxsYDn/uLfABFAy1jYEKUVyGsbDAjwYBkUgUd LgFL2irUSCBv6h66TBM+FzXPK8xy1MHrRSCNTz4NRj5hdI1Rs56hCNc1NqTZPikvH3b0qcKjdc/Mo4 Stz1SmFoXM8WybE0cCN66HxfKwGGJjDbzMEUcLPUzWe33ueadDWykP8BuR4Wn2h2eZdqahXgnSeh6y o+ctFr0B2ldvMC5hDb78+gTLipaTIsHWoy0Tz27e6fBPN8986WVpu5sJ84XnNUFOsE4NZqKz/gnG6i IvnSVFV+fp+k2V6MM4DW7GUTbUqcycZwJNbOcoXQvAJXHSMrf7D0Di+W9Dqa3/ZS3gZ5gf611g+CeH vJo5LIVOb9zXEkIswoEpFGp2G4hx1NAi5Wm6LesiQiGC8dcC8ryIrg58xHjhBopYWz250TCWGDtHMw gyUx92bYhHwTH/XSschAmUwU30RGYK6wg6cePklAvZoCdW9HO3hDkRP34Xs3mD0QRyS1fmqmyWp0yg s7rEkfHrXA5KxH+peXGGFAjGMhv0KOOUY/Ew/8jSzXEa3FZmJv7/Muwzt0Iw== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Precedence: bulk List-ID: X-Mailing-List: linux-clk@vger.kernel.org This adds a basic devicetree for the MNT Reform2 DIY laptop when using a CM4 adapter and a BPI-CM4 module. Co-developed-by: Lukas F. Hartmann Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../meson-g12b-bananapi-cm4-mnt-reform2.dts | 388 +++++++++++++++++++++ 2 files changed, 389 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 6f61798a109f..c94d9f514dc9 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-bananapi-m2s.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-mnt-reform2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts new file mode 100644 index 000000000000..12c4ff9c9372 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Neil Armstrong + * Copyright 2023 MNT Research GmbH + */ + +/dts-v1/; + +#include "meson-g12b-bananapi-cm4.dtsi" +#include +#include +#include + +/ { + model = "MNT Reform 2 with BPI-CM4 Module"; + compatible = "mntre,reform2-cm4", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b"; + chassis-type = "laptop"; + + aliases { + ethernet0 = ðmac; + i2c0 = &i2c1; + i2c1 = &i2c3; + }; + + hdmi_connector: hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-green { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "MNT-REFORM2-BPI-CM4"; + audio-widgets = "Headphone", "Headphone Jack", + "Speaker", "External Speaker", + "Microphone", "Mic Jack"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmin_b>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_B IN 4", "TDM_B Loopback", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "External Speaker", "SPK_LP", + "External Speaker", "SPK_LN", + "External Speaker", "SPK_RP", + "External Speaker", "SPK_RN", + "LINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + /* Analog Audio */ + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&wm8960>; + }; + }; + + /* hdmi glue */ + dai-link-8 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + + reg_main_1v8: regulator-main-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <®_main_3v3>; + }; + + reg_main_1v2: regulator-main-1v2 { + compatible = "regulator-fixed"; + regulator-name = "1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <®_main_5v>; + }; + + reg_main_3v3: regulator-main-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_main_5v: regulator-main-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_main_usb: regulator-main-usb { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_main_5v>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm_AO_ab 0 10000 0>; + power-supply = <®_main_usb>; + enable-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>; + brightness-levels = <0 32 64 128 160 200 255>; + default-brightness-level = <6>; + + status = "okay"; + }; + + panel { + compatible = "innolux,n125hce-gn1", "simple-panel"; + power-supply = <®_main_3v3>; + backlight = <&backlight>; + no-hpd; + + status = "okay"; + + port { + panel_in: endpoint { + remote-endpoint = <&edp_bridge_out>; + }; + }; + }; + + clock_12288: clock_12288 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; +}; + +&mipi_analog_dphy { + status = "okay"; +}; + +&mipi_dphy { + status = "okay"; +}; + +&mipi_dsi { + status = "okay"; + + assigned-clocks = <&clkc CLKID_GP0_PLL>, + <&clkc CLKID_MIPI_DSI_PXCLK_SEL>, + <&clkc CLKID_MIPI_DSI_PXCLK>, + <&clkc CLKID_CTS_ENCL_SEL>, + <&clkc CLKID_VCLK2_SEL>; + assigned-clock-parents = <0>, + <&clkc CLKID_GP0_PLL>, + <0>, + <&clkc CLKID_VCLK2_DIV1>, + <&clkc CLKID_GP0_PLL>; + assigned-clock-rates = <936000000>, + <0>, + <936000000>, + <0>, + <0>; +}; + +&mipi_dsi_panel_port { + mipi_dsi_out: endpoint { + remote-endpoint = <&edp_bridge_in>; + }; +}; + +&cecb_AO { + status = "okay"; +}; + +ðmac { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&pwm_AO_ab { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_ao_a_pins>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + edp_bridge: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + enable-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_HIGH>; // PIN_24 / GPIO8 + vccio-supply = <®_main_1v8>; + vpll-supply = <®_main_1v8>; + vcca-supply = <®_main_1v2>; + vcc-supply = <®_main_1v2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + edp_bridge_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + edp_bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + wm8960: codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&clock_12288>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + wlf,shared-lrclk; + }; + + rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; +}; + +&pcie { + status = "okay"; +}; + +&sd_emmc_b { + status = "okay"; +}; + +&tdmif_a { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmif_b { + pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>; + pinctrl-names = "default"; + + assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>, + <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>; + assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + assigned-clock-rates = <0>, <0>; +}; + +&tdmin_b { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&usb { + dr_mode = "host"; + + status = "okay"; +};