| Message ID | 20230808082738.122804-4-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | Awaiting Upstream, archived |
| Headers | show |
| Series | clk: samsung: remove number of clocks from bindings | expand |
> -----Original Message----- > From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Sent: Tuesday, August 8, 2023 1:58 PM > To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>; Sylwester > Nawrocki <s.nawrocki@samsung.com>; Tomasz Figa > <tomasz.figa@gmail.com>; Chanwoo Choi <cw00.choi@samsung.com>; Alim > Akhtar <alim.akhtar@samsung.com>; Michael Turquette > <mturquette@baylibre.com>; Stephen Boyd <sboyd@kernel.org>; Rob > Herring <robh+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>; > linux-samsung-soc@vger.kernel.org; linux-clk@vger.kernel.org; linux-arm- > kernel@lists.infradead.org; linux-kernel@vger.kernel.org; > devicetree@vger.kernel.org > Subject: [PATCH 03/11] clk: samsung: exynos5250: do not define number of > clocks in bindings > > Number of clocks supported by Linux drivers might vary - sometimes we add > new clocks, not exposed previously. Therefore this number of clocks should > not be in the bindings, because otherwise we should not change it. > > Define number of clocks per each clock controller inside the driver directly. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> > drivers/clk/samsung/clk-exynos5250.c | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk- > exynos5250.c > index 92fb09922f28..8ebe6155d8b7 100644 > --- a/drivers/clk/samsung/clk-exynos5250.c > +++ b/drivers/clk/samsung/clk-exynos5250.c > @@ -100,6 +100,9 @@ > #define PWR_CTRL2_CORE2_UP_RATIO (1 << 4) > #define PWR_CTRL2_CORE1_UP_RATIO (1 << 0) > > +/* NOTE: Must be equal to the last clock ID increased by one */ > +#define CLKS_NR > (CLK_MOUT_VPLLSRC + 1) > + > /* list of PLLs to be registered */ > enum exynos5250_plls { > apll, mpll, cpll, epll, vpll, gpll, bpll, @@ -797,7 +800,7 @@ static void > __init exynos5250_clk_init(struct device_node *np) > panic("%s: unable to determine soc\n", __func__); > } > > - ctx = samsung_clk_init(NULL, reg_base, CLK_NR_CLKS); > + ctx = samsung_clk_init(NULL, reg_base, CLKS_NR); > hws = ctx->clk_data.hws; > > samsung_clk_of_register_fixed_ext(ctx, > exynos5250_fixed_rate_ext_clks, > -- > 2.34.1
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index 92fb09922f28..8ebe6155d8b7 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -100,6 +100,9 @@ #define PWR_CTRL2_CORE2_UP_RATIO (1 << 4) #define PWR_CTRL2_CORE1_UP_RATIO (1 << 0) +/* NOTE: Must be equal to the last clock ID increased by one */ +#define CLKS_NR (CLK_MOUT_VPLLSRC + 1) + /* list of PLLs to be registered */ enum exynos5250_plls { apll, mpll, cpll, epll, vpll, gpll, bpll, @@ -797,7 +800,7 @@ static void __init exynos5250_clk_init(struct device_node *np) panic("%s: unable to determine soc\n", __func__); } - ctx = samsung_clk_init(NULL, reg_base, CLK_NR_CLKS); + ctx = samsung_clk_init(NULL, reg_base, CLKS_NR); hws = ctx->clk_data.hws; samsung_clk_of_register_fixed_ext(ctx, exynos5250_fixed_rate_ext_clks,
Number of clocks supported by Linux drivers might vary - sometimes we add new clocks, not exposed previously. Therefore this number of clocks should not be in the bindings, because otherwise we should not change it. Define number of clocks per each clock controller inside the driver directly. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- drivers/clk/samsung/clk-exynos5250.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)