diff mbox series

[v2,2/2] clk: renesas: r9a06g032: name anonymous structs

Message ID 20230913203805.465780-2-ralph.siemsen@linaro.org (mailing list archive)
State Awaiting Upstream, archived
Headers show
Series [v2,1/2] clk: renesas: r9a06g032: fix kerneldoc warning | expand

Commit Message

Ralph Siemsen Sept. 13, 2023, 8:38 p.m. UTC
Clarify the content of the r9a06g032_clkdesc structure by naming the
remaining anonymous structures defined inside. Renaming each field and
updating the doc then becomes necessary in order to avoid name
duplications and kdoc warnings.

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
--
Changes in v2:
- split this out as a separate commit
---
 drivers/clk/renesas/r9a06g032-clocks.c | 63 ++++++++++++++------------
 1 file changed, 33 insertions(+), 30 deletions(-)

Comments

Miquel Raynal Sept. 13, 2023, 8:44 p.m. UTC | #1
Hi Ralph,

ralph.siemsen@linaro.org wrote on Wed, 13 Sep 2023 16:38:05 -0400:

> Clarify the content of the r9a06g032_clkdesc structure by naming the
> remaining anonymous structures defined inside. Renaming each field and
> updating the doc then becomes necessary in order to avoid name
> duplications and kdoc warnings.
> 
> Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

Thanks,
Miquèl
Geert Uytterhoeven Sept. 14, 2023, 8:44 a.m. UTC | #2
Hi Ralph,

On Wed, Sep 13, 2023 at 10:38 PM Ralph Siemsen <ralph.siemsen@linaro.org> wrote:
> Clarify the content of the r9a06g032_clkdesc structure by naming the
> remaining anonymous structures defined inside. Renaming each field and
> updating the doc then becomes necessary in order to avoid name
> duplications and kdoc warnings.
>
> Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>

Thanks for your patch!

> --

Please use three hyphens next time, else the below will still end
up in the final commit.

> Changes in v2:
> - split this out as a separate commit

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-clk-for-v6.7, with the above fixed.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c
index aa00543fe865..61296c81f9b5 100644
--- a/drivers/clk/renesas/r9a06g032-clocks.c
+++ b/drivers/clk/renesas/r9a06g032-clocks.c
@@ -102,20 +102,22 @@  enum gate_type {
  * @source:    the ID+1 of the parent clock element.
  *             Root clock uses ID of ~0 (PARENT_ID);
  * @gate:      clock enable/disable
- * @div_min:   smallest permitted clock divider
- * @div_max:   largest permitted clock divider
- * @reg:       clock divider register offset, in 32-bit words
- * @div_table: optional list of fixed clock divider values;
+ * @div:       substructure for clock divider
+ * @div.min:   smallest permitted clock divider
+ * @div.max:   largest permitted clock divider
+ * @div.reg:   clock divider register offset, in 32-bit words
+ * @div.table: optional list of fixed clock divider values;
  *             must be in ascending order, zero for unused
- * @div:       divisor for fixed-factor clock
- * @mul:       multiplier for fixed-factor clock
+ * @ffc:       substructure for fixed-factor clocks
+ * @ffc.div:   divisor for fixed-factor clock
+ * @ffc.mul:   multiplier for fixed-factor clock
  * @dual:      substructure for dual clock gates
- * @group:     UART group, 0=UART0/1/2, 1=UART3/4/5/6/7
- * @sel:       select either g1/r1 or g2/r2 as clock source
- * @g1:        1st source gate (clock enable/disable)
- * @r1:        1st source reset (module reset)
- * @g2:        2nd source gate (clock enable/disable)
- * @r2:        2nd source reset (module reset)
+ * @dual.group: UART group, 0=UART0/1/2, 1=UART3/4/5/6/7
+ * @dual.sel:  select either g1/r1 or g2/r2 as clock source
+ * @dual.g1:   1st source gate (clock enable/disable)
+ * @dual.r1:   1st source reset (module reset)
+ * @dual.g2:   2nd source gate (clock enable/disable)
+ * @dual.r2:   2nd source reset (module reset)
  *
  * Describes a single element in the clock tree hierarchy.
  * As there are quite a large number of clock elements, this
@@ -132,13 +134,13 @@  struct r9a06g032_clkdesc {
 		struct r9a06g032_gate gate;
 		/* type = K_DIV  */
 		struct {
-			unsigned int div_min:10, div_max:10, reg:10;
-			u16 div_table[4];
-		};
+			unsigned int min:10, max:10, reg:10;
+			u16 table[4];
+		} div;
 		/* type = K_FFC */
 		struct {
 			u16 div, mul;
-		};
+		} ffc;
 		/* type = K_DUALGATE */
 		struct {
 			uint16_t group:1;
@@ -179,26 +181,26 @@  struct r9a06g032_clkdesc {
 	.type = K_FFC, \
 	.index = R9A06G032_##_idx, \
 	.name = _n, \
-	.div = _div, \
-	.mul = _mul \
+	.ffc.div = _div, \
+	.ffc.mul = _mul \
 }
 #define D_FFC(_idx, _n, _src, _div) { \
 	.type = K_FFC, \
 	.index = R9A06G032_##_idx, \
 	.source = 1 + R9A06G032_##_src, \
 	.name = _n, \
-	.div = _div, \
-	.mul = 1 \
+	.ffc.div = _div, \
+	.ffc.mul = 1 \
 }
 #define D_DIV(_idx, _n, _src, _reg, _min, _max, ...) { \
 	.type = K_DIV, \
 	.index = R9A06G032_##_idx, \
 	.source = 1 + R9A06G032_##_src, \
 	.name = _n, \
-	.reg = _reg, \
-	.div_min = _min, \
-	.div_max = _max, \
-	.div_table = { __VA_ARGS__ } \
+	.div.reg = _reg, \
+	.div.min = _min, \
+	.div.max = _max, \
+	.div.table = { __VA_ARGS__ } \
 }
 #define D_UGATE(_idx, _n, _src, _g, _g1, _r1, _g2, _r2) { \
 	.type = K_DUALGATE, \
@@ -1064,14 +1066,14 @@  r9a06g032_register_div(struct r9a06g032_priv *clocks,
 
 	div->clocks = clocks;
 	div->index = desc->index;
-	div->reg = desc->reg;
+	div->reg = desc->div.reg;
 	div->hw.init = &init;
-	div->min = desc->div_min;
-	div->max = desc->div_max;
+	div->min = desc->div.min;
+	div->max = desc->div.max;
 	/* populate (optional) divider table fixed values */
 	for (i = 0; i < ARRAY_SIZE(div->table) &&
-	     i < ARRAY_SIZE(desc->div_table) && desc->div_table[i]; i++) {
-		div->table[div->table_size++] = desc->div_table[i];
+	     i < ARRAY_SIZE(desc->div.table) && desc->div.table[i]; i++) {
+		div->table[div->table_size++] = desc->div.table[i];
 	}
 
 	clk = clk_register(NULL, &div->hw);
@@ -1334,7 +1336,8 @@  static int __init r9a06g032_clocks_probe(struct platform_device *pdev)
 		case K_FFC:
 			clk = clk_register_fixed_factor(NULL, d->name,
 							parent_name, 0,
-							d->mul, d->div);
+							d->ffc.mul,
+							d->ffc.div);
 			break;
 		case K_GATE:
 			clk = r9a06g032_register_gate(clocks, parent_name, d);