From patchwork Tue Nov 28 16:48:48 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Gabriel FERNANDEZ X-Patchwork-Id: 13471445 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=foss.st.com header.i=@foss.st.com header.b="XFXmZCbT" Received: from mx07-00178001.pphosted.com (mx08-00178001.pphosted.com [91.207.212.93]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7C7B8D6; Tue, 28 Nov 2023 08:49:33 -0800 (PST) Received: from pps.filterd (m0046661.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.22/8.17.1.22) with ESMTP id 3ASESCr1023439; Tue, 28 Nov 2023 17:49:09 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h= from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding:content-type; s= selector1; bh=+FBqqQBhdYWt2/1e7fszfSaeyVgzQ15Wn2YoYk3WAfI=; b=XF XmZCbTDr1BjYMXbEhOEYxidyC1ACEU//2i8Cp+soz0HpvJdb+28SCPpLolc1vPT2 6Q/0UEGH+oOGzGasckx9jBzVTAd70Iqid0CQfselgNvDIo6JvpIycFbyaHveo/Hc 8CZDwteyMDjZf6jJNTHqntlCxWWkclGGipepdcLMzZpnC9hverB/Gf+iu2TTFsye 4U7nx7vpY1QS8+Z/jntlo7Sor5CB/0kgf/GJyfSjloNKCA/x8/rUpe+eP8D4yF4H DlJwkJLDlym2pCJWbO4iPnX16lzxg9HwXC9OHsV1WBvz/f4b4tpNv4Y+Ie9gfLEF kbeLGlN18m9cpqds6N+Q== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3uk8pjw5mq-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 28 Nov 2023 17:49:09 +0100 (CET) Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id DE41810005A; Tue, 28 Nov 2023 17:49:07 +0100 (CET) Received: from Webmail-eu.st.com (shfdag1node1.st.com [10.75.129.69]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id D57D326028A; Tue, 28 Nov 2023 17:49:07 +0100 (CET) Received: from localhost (10.201.21.240) by SHFDAG1NODE1.st.com (10.75.129.69) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.27; Tue, 28 Nov 2023 17:49:07 +0100 From: To: Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Maxime Coquelin , Alexandre Torgue , Philipp Zabel , Gabriel Fernandez CC: , , , , Subject: [PATCH v4 2/5] clk: stm32mp1: use stm32mp13 reset driver Date: Tue, 28 Nov 2023 17:48:48 +0100 Message-ID: <20231128164851.588315-3-gabriel.fernandez@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20231128164851.588315-1-gabriel.fernandez@foss.st.com> References: <20231128164851.588315-1-gabriel.fernandez@foss.st.com> Precedence: bulk X-Mailing-List: linux-clk@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ClientProxiedBy: EQNCAS1NODE4.st.com (10.75.129.82) To SHFDAG1NODE1.st.com (10.75.129.69) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-28_18,2023-11-27_01,2023-05-22_02 From: Gabriel Fernandez STM32MP15 is now using the same reset driver as STM32MP13 as they have the same binding requirement. Signed-off-by: Gabriel Fernandez --- drivers/clk/stm32/Makefile | 2 +- drivers/clk/stm32/clk-stm32-core.c | 5 +- drivers/clk/stm32/clk-stm32-core.h | 5 +- drivers/clk/stm32/clk-stm32mp1.c | 127 ++++------------------------- drivers/clk/stm32/clk-stm32mp13.c | 9 +- drivers/clk/stm32/reset-stm32.c | 14 ++-- drivers/clk/stm32/reset-stm32.h | 8 +- 7 files changed, 42 insertions(+), 128 deletions(-) diff --git a/drivers/clk/stm32/Makefile b/drivers/clk/stm32/Makefile index c154ef3e88f9..5ced7fe3ddec 100644 --- a/drivers/clk/stm32/Makefile +++ b/drivers/clk/stm32/Makefile @@ -1,2 +1,2 @@ obj-$(CONFIG_COMMON_CLK_STM32MP135) += clk-stm32mp13.o clk-stm32-core.o reset-stm32.o -obj-$(CONFIG_COMMON_CLK_STM32MP157) += clk-stm32mp1.o +obj-$(CONFIG_COMMON_CLK_STM32MP157) += clk-stm32mp1.o reset-stm32.o diff --git a/drivers/clk/stm32/clk-stm32-core.c b/drivers/clk/stm32/clk-stm32-core.c index 067b918a8894..58705fcad334 100644 --- a/drivers/clk/stm32/clk-stm32-core.c +++ b/drivers/clk/stm32/clk-stm32-core.c @@ -70,6 +70,7 @@ static int stm32_rcc_clock_init(struct device *dev, int stm32_rcc_init(struct device *dev, const struct of_device_id *match_data, void __iomem *base) { + const struct stm32_rcc_match_data *rcc_match_data; const struct of_device_id *match; int err; @@ -79,8 +80,10 @@ int stm32_rcc_init(struct device *dev, const struct of_device_id *match_data, return -ENODEV; } + rcc_match_data = match->data; + /* RCC Reset Configuration */ - err = stm32_rcc_reset_init(dev, match, base); + err = stm32_rcc_reset_init(dev, rcc_match_data->reset_data, base); if (err) { pr_err("stm32 reset failed to initialize\n"); return err; diff --git a/drivers/clk/stm32/clk-stm32-core.h b/drivers/clk/stm32/clk-stm32-core.h index 76cffda02308..bb5aa19a792d 100644 --- a/drivers/clk/stm32/clk-stm32-core.h +++ b/drivers/clk/stm32/clk-stm32-core.h @@ -70,15 +70,12 @@ struct stm32_rcc_match_data { const struct clock_config *tab_clocks; unsigned int maxbinding; struct clk_stm32_clock_data *clock_data; - u32 clear_offset; + struct clk_stm32_reset_data *reset_data; int (*check_security)(void __iomem *base, const struct clock_config *cfg); int (*multi_mux)(void __iomem *base, const struct clock_config *cfg); }; -int stm32_rcc_reset_init(struct device *dev, const struct of_device_id *match, - void __iomem *base); - int stm32_rcc_init(struct device *dev, const struct of_device_id *match_data, void __iomem *base); diff --git a/drivers/clk/stm32/clk-stm32mp1.c b/drivers/clk/stm32/clk-stm32mp1.c index 939779f66867..c7cbd3488aab 100644 --- a/drivers/clk/stm32/clk-stm32mp1.c +++ b/drivers/clk/stm32/clk-stm32mp1.c @@ -20,6 +20,10 @@ #include +#include "reset-stm32.h" + +#define STM32MP1_RESET_ID_MASK GENMASK(15, 0) + static DEFINE_SPINLOCK(rlock); #define RCC_OCENSETR 0x0C @@ -2137,22 +2141,27 @@ struct stm32_rcc_match_data { const struct clock_config *cfg; unsigned int num; unsigned int maxbinding; - u32 clear_offset; + struct clk_stm32_reset_data *reset_data; bool (*check_security)(const struct clock_config *cfg); }; +struct clk_stm32_reset_data stm32mp1_reset_data = { + .nr_lines = STM32MP1_RESET_ID_MASK, + .clear_offset = RCC_CLR, +}; + static struct stm32_rcc_match_data stm32mp1_data = { .cfg = stm32mp1_clock_cfg, .num = ARRAY_SIZE(stm32mp1_clock_cfg), .maxbinding = STM32MP1_LAST_CLK, - .clear_offset = RCC_CLR, + .reset_data = &stm32mp1_reset_data, }; static struct stm32_rcc_match_data stm32mp1_data_secure = { .cfg = stm32mp1_clock_cfg, .num = ARRAY_SIZE(stm32mp1_clock_cfg), .maxbinding = STM32MP1_LAST_CLK, - .clear_offset = RCC_CLR, + .reset_data = &stm32mp1_reset_data, .check_security = &stm32_check_security }; @@ -2193,113 +2202,6 @@ static int stm32_register_hw_clk(struct device *dev, return 0; } -#define STM32_RESET_ID_MASK GENMASK(15, 0) - -struct stm32_reset_data { - /* reset lock */ - spinlock_t lock; - struct reset_controller_dev rcdev; - void __iomem *membase; - u32 clear_offset; -}; - -static inline struct stm32_reset_data * -to_stm32_reset_data(struct reset_controller_dev *rcdev) -{ - return container_of(rcdev, struct stm32_reset_data, rcdev); -} - -static int stm32_reset_update(struct reset_controller_dev *rcdev, - unsigned long id, bool assert) -{ - struct stm32_reset_data *data = to_stm32_reset_data(rcdev); - int reg_width = sizeof(u32); - int bank = id / (reg_width * BITS_PER_BYTE); - int offset = id % (reg_width * BITS_PER_BYTE); - - if (data->clear_offset) { - void __iomem *addr; - - addr = data->membase + (bank * reg_width); - if (!assert) - addr += data->clear_offset; - - writel(BIT(offset), addr); - - } else { - unsigned long flags; - u32 reg; - - spin_lock_irqsave(&data->lock, flags); - - reg = readl(data->membase + (bank * reg_width)); - - if (assert) - reg |= BIT(offset); - else - reg &= ~BIT(offset); - - writel(reg, data->membase + (bank * reg_width)); - - spin_unlock_irqrestore(&data->lock, flags); - } - - return 0; -} - -static int stm32_reset_assert(struct reset_controller_dev *rcdev, - unsigned long id) -{ - return stm32_reset_update(rcdev, id, true); -} - -static int stm32_reset_deassert(struct reset_controller_dev *rcdev, - unsigned long id) -{ - return stm32_reset_update(rcdev, id, false); -} - -static int stm32_reset_status(struct reset_controller_dev *rcdev, - unsigned long id) -{ - struct stm32_reset_data *data = to_stm32_reset_data(rcdev); - int reg_width = sizeof(u32); - int bank = id / (reg_width * BITS_PER_BYTE); - int offset = id % (reg_width * BITS_PER_BYTE); - u32 reg; - - reg = readl(data->membase + (bank * reg_width)); - - return !!(reg & BIT(offset)); -} - -static const struct reset_control_ops stm32_reset_ops = { - .assert = stm32_reset_assert, - .deassert = stm32_reset_deassert, - .status = stm32_reset_status, -}; - -static int stm32_rcc_reset_init(struct device *dev, void __iomem *base, - const struct of_device_id *match) -{ - const struct stm32_rcc_match_data *data = match->data; - struct stm32_reset_data *reset_data = NULL; - - reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL); - if (!reset_data) - return -ENOMEM; - - spin_lock_init(&reset_data->lock); - reset_data->membase = base; - reset_data->rcdev.owner = THIS_MODULE; - reset_data->rcdev.ops = &stm32_reset_ops; - reset_data->rcdev.of_node = dev_of_node(dev); - reset_data->rcdev.nr_resets = STM32_RESET_ID_MASK; - reset_data->clear_offset = data->clear_offset; - - return reset_controller_register(&reset_data->rcdev); -} - static int stm32_rcc_clock_init(struct device *dev, void __iomem *base, const struct of_device_id *match) { @@ -2342,6 +2244,7 @@ static int stm32_rcc_clock_init(struct device *dev, void __iomem *base, static int stm32_rcc_init(struct device *dev, void __iomem *base, const struct of_device_id *match_data) { + const struct stm32_rcc_match_data *rcc_match_data; const struct of_device_id *match; int err; @@ -2351,8 +2254,10 @@ static int stm32_rcc_init(struct device *dev, void __iomem *base, return -ENODEV; } + rcc_match_data = match->data; + /* RCC Reset Configuration */ - err = stm32_rcc_reset_init(dev, base, match); + err = stm32_rcc_reset_init(dev, rcc_match_data->reset_data, base); if (err) { pr_err("stm32mp1 reset failed to initialize\n"); return err; diff --git a/drivers/clk/stm32/clk-stm32mp13.c b/drivers/clk/stm32/clk-stm32mp13.c index c4a737482fe5..7a1f4003227f 100644 --- a/drivers/clk/stm32/clk-stm32mp13.c +++ b/drivers/clk/stm32/clk-stm32mp13.c @@ -10,8 +10,10 @@ #include #include #include "clk-stm32-core.h" +#include "reset-stm32.h" #include "stm32mp13_rcc.h" +#define STM32MP1_RESET_ID_MASK GENMASK(15, 0) #define RCC_CLR_OFFSET 0x4 /* STM32 Gates definition */ @@ -1511,13 +1513,18 @@ static struct clk_stm32_clock_data stm32mp13_clock_data = { .is_multi_mux = stm32mp13_is_multi_mux, }; +struct clk_stm32_reset_data stm32mp13_reset_data = { + .nr_lines = STM32MP1_RESET_ID_MASK, + .clear_offset = RCC_CLR_OFFSET, +}; + static const struct stm32_rcc_match_data stm32mp13_data = { .tab_clocks = stm32mp13_clock_cfg, .num_clocks = ARRAY_SIZE(stm32mp13_clock_cfg), .clock_data = &stm32mp13_clock_data, .check_security = &stm32mp13_clock_is_provided_by_secure, .maxbinding = STM32MP1_LAST_CLK, - .clear_offset = RCC_CLR_OFFSET, + .reset_data = &stm32mp13_reset_data, }; static const struct of_device_id stm32mp13_match_data[] = { diff --git a/drivers/clk/stm32/reset-stm32.c b/drivers/clk/stm32/reset-stm32.c index e89381528af9..14c2ee1eebee 100644 --- a/drivers/clk/stm32/reset-stm32.c +++ b/drivers/clk/stm32/reset-stm32.c @@ -11,9 +11,7 @@ #include #include -#include "clk-stm32-core.h" - -#define STM32_RESET_ID_MASK GENMASK(15, 0) +#include "reset-stm32.h" struct stm32_reset_data { /* reset lock */ @@ -99,24 +97,22 @@ static const struct reset_control_ops stm32_reset_ops = { .status = stm32_reset_status, }; -int stm32_rcc_reset_init(struct device *dev, const struct of_device_id *match, +int stm32_rcc_reset_init(struct device *dev, struct clk_stm32_reset_data *data, void __iomem *base) { - const struct stm32_rcc_match_data *data = match->data; - struct stm32_reset_data *reset_data = NULL; - - data = match->data; + struct stm32_reset_data *reset_data; reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL); if (!reset_data) return -ENOMEM; spin_lock_init(&reset_data->lock); + reset_data->membase = base; reset_data->rcdev.owner = THIS_MODULE; reset_data->rcdev.ops = &stm32_reset_ops; reset_data->rcdev.of_node = dev_of_node(dev); - reset_data->rcdev.nr_resets = STM32_RESET_ID_MASK; + reset_data->rcdev.nr_resets = data->nr_lines; reset_data->clear_offset = data->clear_offset; return reset_controller_register(&reset_data->rcdev); diff --git a/drivers/clk/stm32/reset-stm32.h b/drivers/clk/stm32/reset-stm32.h index 6eb6ea4b55ab..8cf1cc9be480 100644 --- a/drivers/clk/stm32/reset-stm32.h +++ b/drivers/clk/stm32/reset-stm32.h @@ -4,5 +4,11 @@ * Author: Gabriel Fernandez for STMicroelectronics. */ -int stm32_rcc_reset_init(struct device *dev, const struct of_device_id *match, +struct clk_stm32_reset_data { + const struct reset_control_ops *ops; + unsigned int nr_lines; + u32 clear_offset; +}; + +int stm32_rcc_reset_init(struct device *dev, struct clk_stm32_reset_data *data, void __iomem *base);