| Message ID | 20240108130238.540794-4-hdegoede@redhat.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | x86: atom-punit/-pmc s2idle device state checks | expand |
On Mon, 8 Jan 2024, Hans de Goede wrote: > From: Johannes Stezenbach <js@sig21.net> > > For the Bay Trail or Cherry Trail SoC to enter the S0i3 power-level > at s2idle suspend requires most of the hw-blocks / devices in the SoC > to be in D3 when entering s2idle suspend. > > If some devices are not in D3 then the SoC will stay in a higher > power state, consuming much more power from the battery then in S0i3. > > Use the new acpi_s2idle_dev_ops and acpi_register_lps0_dev() > functionality to register a new s2idle check function which checks that > all hardware blocks in the South complex (controlled by the PMC) > are in a state that allows the SoC to enter S0i3 and prints an error > message for any device in D0. > > Some blocks are not used on lower-featured versions of the SoC and > these blocks will always report being in D0 on SoCs were they are > not used. A false-positive mask is used to identify these blocks > and for blocks in this mask the error is turned into a debug message > to avoid false-positive error messages. > > Note the pmc_atom code is enabled by CONFIG_X86_INTEL_LPSS which > already depends on ACPI. > > Signed-off-by: Johannes Stezenbach <js@sig21.net> > Signed-off-by: Takashi Iwai <tiwai@suse.de> > [hdegoede: Use acpi_s2idle_dev_ops, ignore fused off blocks, PMIC I2C] > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > Changes in v3: > - Reword commit message > - Drop confusing /* Low Part */ and /* High Part */ comments > > Changes in v2: > - Drop duplicated "pmc_atom: " prefix from pr_err() / pr_dbg() messages > --- > drivers/platform/x86/pmc_atom.c | 64 +++++++++++++++++++++++++++++++++ > 1 file changed, 64 insertions(+) > > diff --git a/drivers/platform/x86/pmc_atom.c b/drivers/platform/x86/pmc_atom.c > index 93a6414c6611..ec60b734b9cb 100644 > --- a/drivers/platform/x86/pmc_atom.c > +++ b/drivers/platform/x86/pmc_atom.c > @@ -6,6 +6,7 @@ > > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > > +#include <linux/acpi.h> > #include <linux/debugfs.h> > #include <linux/device.h> > #include <linux/dmi.h> > @@ -17,6 +18,7 @@ > #include <linux/platform_device.h> > #include <linux/pci.h> > #include <linux/seq_file.h> > +#include <linux/suspend.h> > > struct pmc_bit_map { > const char *name; > @@ -448,6 +450,64 @@ static int pmc_setup_clks(struct pci_dev *pdev, void __iomem *pmc_regmap, > return 0; > } > > +#ifdef CONFIG_SUSPEND > +static void pmc_dev_state_check(u32 sts, const struct pmc_bit_map *sts_map, > + u32 fd, const struct pmc_bit_map *fd_map, > + u32 sts_possible_false_pos) > +{ > + int index; > + > + for (index = 0; sts_map[index].name; index++) { > + if (!(fd_map[index].bit_mask & fd) && > + !(sts_map[index].bit_mask & sts)) { > + if (sts_map[index].bit_mask & sts_possible_false_pos) > + pm_pr_dbg("%s is in D0 prior to s2idle\n", > + sts_map[index].name); > + else > + pr_err("%s is in D0 prior to s2idle\n", > + sts_map[index].name); > + } > + } > +} > + > +static void pmc_s2idle_check(void) > +{ > + struct pmc_dev *pmc = &pmc_device; > + const struct pmc_reg_map *m = pmc->map; > + u32 func_dis, func_dis_2; > + u32 d3_sts_0, d3_sts_1; > + u32 false_pos_sts_0, false_pos_sts_1; > + > + func_dis = pmc_reg_read(pmc, PMC_FUNC_DIS); > + func_dis_2 = pmc_reg_read(pmc, PMC_FUNC_DIS_2); > + d3_sts_0 = pmc_reg_read(pmc, PMC_D3_STS_0); > + d3_sts_1 = pmc_reg_read(pmc, PMC_D3_STS_1); > + > + /* > + * Some blocks are not used on lower-featured versions of the SoC and > + * always report D0, add these to false_pos mask to log at debug level. > + */ > + if (m->d3_sts_1 == byt_d3_sts_1_map) { > + /* Bay Trail */ > + false_pos_sts_0 = BIT_GBE | BIT_SATA | BIT_PCIE_PORT0 | > + BIT_PCIE_PORT1 | BIT_PCIE_PORT2 | BIT_PCIE_PORT3 | > + BIT_LPSS2_F5_I2C5; > + false_pos_sts_1 = BIT_SMB | BIT_USH_SS_PHY | BIT_DFX; > + } else { > + /* Cherry Trail */ > + false_pos_sts_0 = BIT_GBE | BIT_SATA | BIT_LPSS2_F7_I2C7; > + false_pos_sts_1 = BIT_SMB | BIT_STS_ISH; > + } > + > + pmc_dev_state_check(d3_sts_0, m->d3_sts_0, func_dis, m->func_dis, false_pos_sts_0); > + pmc_dev_state_check(d3_sts_1, m->d3_sts_1, func_dis_2, m->func_dis_2, false_pos_sts_1); > +} > + > +static struct acpi_s2idle_dev_ops pmc_s2idle_ops = { > + .check = pmc_s2idle_check, > +}; > +#endif > + > static int pmc_setup_dev(struct pci_dev *pdev, const struct pci_device_id *ent) > { > struct pmc_dev *pmc = &pmc_device; > @@ -485,6 +545,10 @@ static int pmc_setup_dev(struct pci_dev *pdev, const struct pci_device_id *ent) > dev_warn(&pdev->dev, "platform clocks register failed: %d\n", > ret); > > +#ifdef CONFIG_SUSPEND > + acpi_register_lps0_dev(&pmc_s2idle_ops); > +#endif I'm sorry I missed this in v2, this could have also used #else + dummy function. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
diff --git a/drivers/platform/x86/pmc_atom.c b/drivers/platform/x86/pmc_atom.c index 93a6414c6611..ec60b734b9cb 100644 --- a/drivers/platform/x86/pmc_atom.c +++ b/drivers/platform/x86/pmc_atom.c @@ -6,6 +6,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/acpi.h> #include <linux/debugfs.h> #include <linux/device.h> #include <linux/dmi.h> @@ -17,6 +18,7 @@ #include <linux/platform_device.h> #include <linux/pci.h> #include <linux/seq_file.h> +#include <linux/suspend.h> struct pmc_bit_map { const char *name; @@ -448,6 +450,64 @@ static int pmc_setup_clks(struct pci_dev *pdev, void __iomem *pmc_regmap, return 0; } +#ifdef CONFIG_SUSPEND +static void pmc_dev_state_check(u32 sts, const struct pmc_bit_map *sts_map, + u32 fd, const struct pmc_bit_map *fd_map, + u32 sts_possible_false_pos) +{ + int index; + + for (index = 0; sts_map[index].name; index++) { + if (!(fd_map[index].bit_mask & fd) && + !(sts_map[index].bit_mask & sts)) { + if (sts_map[index].bit_mask & sts_possible_false_pos) + pm_pr_dbg("%s is in D0 prior to s2idle\n", + sts_map[index].name); + else + pr_err("%s is in D0 prior to s2idle\n", + sts_map[index].name); + } + } +} + +static void pmc_s2idle_check(void) +{ + struct pmc_dev *pmc = &pmc_device; + const struct pmc_reg_map *m = pmc->map; + u32 func_dis, func_dis_2; + u32 d3_sts_0, d3_sts_1; + u32 false_pos_sts_0, false_pos_sts_1; + + func_dis = pmc_reg_read(pmc, PMC_FUNC_DIS); + func_dis_2 = pmc_reg_read(pmc, PMC_FUNC_DIS_2); + d3_sts_0 = pmc_reg_read(pmc, PMC_D3_STS_0); + d3_sts_1 = pmc_reg_read(pmc, PMC_D3_STS_1); + + /* + * Some blocks are not used on lower-featured versions of the SoC and + * always report D0, add these to false_pos mask to log at debug level. + */ + if (m->d3_sts_1 == byt_d3_sts_1_map) { + /* Bay Trail */ + false_pos_sts_0 = BIT_GBE | BIT_SATA | BIT_PCIE_PORT0 | + BIT_PCIE_PORT1 | BIT_PCIE_PORT2 | BIT_PCIE_PORT3 | + BIT_LPSS2_F5_I2C5; + false_pos_sts_1 = BIT_SMB | BIT_USH_SS_PHY | BIT_DFX; + } else { + /* Cherry Trail */ + false_pos_sts_0 = BIT_GBE | BIT_SATA | BIT_LPSS2_F7_I2C7; + false_pos_sts_1 = BIT_SMB | BIT_STS_ISH; + } + + pmc_dev_state_check(d3_sts_0, m->d3_sts_0, func_dis, m->func_dis, false_pos_sts_0); + pmc_dev_state_check(d3_sts_1, m->d3_sts_1, func_dis_2, m->func_dis_2, false_pos_sts_1); +} + +static struct acpi_s2idle_dev_ops pmc_s2idle_ops = { + .check = pmc_s2idle_check, +}; +#endif + static int pmc_setup_dev(struct pci_dev *pdev, const struct pci_device_id *ent) { struct pmc_dev *pmc = &pmc_device; @@ -485,6 +545,10 @@ static int pmc_setup_dev(struct pci_dev *pdev, const struct pci_device_id *ent) dev_warn(&pdev->dev, "platform clocks register failed: %d\n", ret); +#ifdef CONFIG_SUSPEND + acpi_register_lps0_dev(&pmc_s2idle_ops); +#endif + pmc->init = true; return ret; }