diff mbox series

[v4,3/3] arm64: dts: exynos: Add CPU clocks for Exynos850

Message ID 20240301015118.30072-3-semen.protsenko@linaro.org (mailing list archive)
State Not Applicable, archived
Headers show
Series [v4,1/3] clk: samsung: Implement manual PLL control for ARM64 SoCs | expand

Commit Message

Sam Protsenko March 1, 2024, 1:51 a.m. UTC 
Define CPU cluster 0 and CPU cluster 1 CMUs, which generate CPU clocks,
and add corresponding CPU clocks to CPU nodes.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
Changes in v4:
  - none

Changes in v3:
  - none

Changes in v2:
  - Added "for Exynos850" part to the commit title

 arch/arm64/boot/dts/exynos/exynos850.dtsi | 26 +++++++++++++++++++++++
 1 file changed, 26 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
index 2ba67c3d0681..0706c8534ceb 100644
--- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -93,6 +93,8 @@  cpu0: cpu@0 {
 			compatible = "arm,cortex-a55";
 			reg = <0x0>;
 			enable-method = "psci";
+			clocks = <&cmu_cpucl0 CLK_CLUSTER0_SCLK>;
+			clock-names = "cluster0_clk";
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
@@ -117,6 +119,8 @@  cpu4: cpu@100 {
 			compatible = "arm,cortex-a55";
 			reg = <0x100>;
 			enable-method = "psci";
+			clocks = <&cmu_cpucl1 CLK_CLUSTER1_SCLK>;
+			clock-names = "cluster1_clk";
 		};
 		cpu5: cpu@101 {
 			device_type = "cpu";
@@ -254,6 +258,28 @@  cmu_peri: clock-controller@10030000 {
 				      "dout_peri_uart", "dout_peri_ip";
 		};
 
+		cmu_cpucl1: clock-controller@10800000 {
+			compatible = "samsung,exynos850-cmu-cpucl1";
+			reg = <0x10800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_CPUCL1_SWITCH>,
+				 <&cmu_top CLK_DOUT_CPUCL1_DBG>;
+			clock-names = "oscclk", "dout_cpucl1_switch",
+				      "dout_cpucl1_dbg";
+		};
+
+		cmu_cpucl0: clock-controller@10900000 {
+			compatible = "samsung,exynos850-cmu-cpucl0";
+			reg = <0x10900000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_CPUCL0_SWITCH>,
+				 <&cmu_top CLK_DOUT_CPUCL0_DBG>;
+			clock-names = "oscclk", "dout_cpucl0_switch",
+				      "dout_cpucl0_dbg";
+		};
+
 		cmu_g3d: clock-controller@11400000 {
 			compatible = "samsung,exynos850-cmu-g3d";
 			reg = <0x11400000 0x8000>;