| Message ID | 20240326-fix-ipq5018-apss-pll-rate-v1-1-82ab31c9da7e@gmail.com (mailing list archive) |
|---|---|
| State | Awaiting Upstream, archived |
| Headers | show |
| Series | clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018 | expand |
On 26.03.2024 2:34 PM, Gabor Juhos wrote: > According to ipq5018.dtsi, the maximum supported rate by the > CPU is 1.008 GHz on the IPQ5018 platform, however the current > configuration of the PLL results in 1.2 GHz rate. > > Change the 'L' value in the PLL configuration to limit the > rate to 1.008 GHz. The downstream kernel also uses the same > value [1]. Also add a comment to indicate the desired > frequency. > > [1] https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c?ref_type=heads#L151 > > Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018") > Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
On Tue, 26 Mar 2024 14:34:11 +0100, Gabor Juhos wrote: > According to ipq5018.dtsi, the maximum supported rate by the > CPU is 1.008 GHz on the IPQ5018 platform, however the current > configuration of the PLL results in 1.2 GHz rate. > > Change the 'L' value in the PLL configuration to limit the > rate to 1.008 GHz. The downstream kernel also uses the same > value [1]. Also add a comment to indicate the desired > frequency. > > [...] Applied, thanks! [1/1] clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018 commit: f58edff0331fa18bbaaade3ae675f547c0245224 Best regards,
diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c index 678b805f13d45..5e3da5558f4e0 100644 --- a/drivers/clk/qcom/apss-ipq-pll.c +++ b/drivers/clk/qcom/apss-ipq-pll.c @@ -73,8 +73,9 @@ static struct clk_alpha_pll ipq_pll_stromer_plus = { }, }; +/* 1.008 GHz configuration */ static const struct alpha_pll_config ipq5018_pll_config = { - .l = 0x32, + .l = 0x2a, .config_ctl_val = 0x4001075b, .config_ctl_hi_val = 0x304, .main_output_mask = BIT(0),
According to ipq5018.dtsi, the maximum supported rate by the CPU is 1.008 GHz on the IPQ5018 platform, however the current configuration of the PLL results in 1.2 GHz rate. Change the 'L' value in the PLL configuration to limit the rate to 1.008 GHz. The downstream kernel also uses the same value [1]. Also add a comment to indicate the desired frequency. [1] https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c?ref_type=heads#L151 Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> --- Based on v6.9-rc1. Note: The change is independent from the "clk: qcom: apss-ipq-pll: various cleanups" series posted earlier [2]. [2] https://lore.kernel.org/r/20240326-apss-ipq-pll-cleanup-v3-0-15c4aeeb14ac@gmail.com --- drivers/clk/qcom/apss-ipq-pll.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- base-commit: 4cece764965020c22cff7665b18a012006359095 change-id: 20240326-fix-ipq5018-apss-pll-rate-fed3ab51b1c2 Best regards,