diff mbox series

[07/12] arm64: dts: renesas: r9a08g045: Add VBATTB node

Message ID 20240614071932.1014067-8-claudiu.beznea.uj@bp.renesas.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Add RTC support for the Renesas RZ/G3S SoC | expand

Commit Message

Claudiu Beznea June 14, 2024, 7:19 a.m. UTC
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Add the DT node for the VBATTB IP along with DT bindings for the clock
it provides.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
index 2162c247d6de..b7bd2e1f3462 100644
--- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
@@ -72,6 +72,31 @@  scif0: serial@1004b800 {
 			status = "disabled";
 		};
 
+		vbattb: vbattb@1005c000 {
+			compatible = "renesas,rzg3s-vbattb", "syscon", "simple-mfd";
+			reg = <0 0x1005c000 0 0x1000>;
+			ranges = <0 0 0 0x1005c000 0 0x1000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tampdi";
+			clocks = <&cpg CPG_MOD R9A08G045_VBAT_BCLK>;
+			clock-names = "bclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A08G045_VBAT_BRESETN>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			vbattclk: clock-controller@1c {
+				compatible = "renesas,rzg3s-vbattb-clk";
+				reg = <0 0x1c 0 0x10>;
+				clocks = <&cpg CPG_MOD R9A08G045_VBAT_BCLK>, <&vbattb_xtal>;
+				clock-names = "bclk", "vbattb_xtal";
+				#clock-cells = <0>;
+				power-domains = <&cpg>;
+				status = "disabled";
+			};
+		};
+
 		cpg: clock-controller@11010000 {
 			compatible = "renesas,r9a08g045-cpg";
 			reg = <0 0x11010000 0 0x10000>;
@@ -296,4 +321,11 @@  timer {
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
+
+	vbattb_xtal: vbattb-xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
 };